Load on Rectangular Plate with Transverse Hole given Nominal Stress Calculator

✖The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.ⓘ Nominal Stress [σ_o]			+10% -10%
✖The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.ⓘ Width of Plate [w]			+10% -10%
✖The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.ⓘ Diameter of Transverse Hole in Plate [d_h]			+10% -10%
✖The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.ⓘ Thickness of Plate [t]			+10% -10%

✖The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.ⓘ Load on Rectangular Plate with Transverse Hole given Nominal Stress [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stress Concentration Factors in Design Formulas PDF PDF Image

Load on Rectangular Plate with Transverse Hole given Nominal Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate
P = σ_o*(w-d_h)*t
This formula uses 5 Variables

Variables Used

Load on Flat Plate - (Measured in Newton) - The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.
Nominal Stress - (Measured in Pascal) - The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.
Width of Plate - (Measured in Meter) - The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.
Diameter of Transverse Hole in Plate - (Measured in Meter) - The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.
Thickness of Plate - (Measured in Meter) - The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

STEP 1: Convert Input(s) to Base Unit

Nominal Stress: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)
Width of Plate: 70 Millimeter --> 0.07 Meter (Check conversion here)
Diameter of Transverse Hole in Plate: 35.01 Millimeter --> 0.03501 Meter (Check conversion here)
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = σ_o*(w-d_h)*t --> 25000000*(0.07-0.03501)*0.01

Evaluating ... ...

P = 8747.5

STEP 3: Convert Result to Output's Unit

8747.5 Newton --> No Conversion Required

FINAL ANSWER

8747.5 Newton <-- Load on Flat Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Rectangular Plate against Fluctuating Loads » Load on Rectangular Plate with Transverse Hole given Nominal Stress

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Rectangular Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

LaTeX Go Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)

Width of Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Width of Plate = Load on Flat Plate/(Thickness of Plate*Nominal Stress)+Diameter of Transverse Hole in Plate

Load on Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate

Highest Value of Actual Stress near Discontinuity

LaTeX Go Highest Value of Actual Stress near Discontinuity = Fatigue Stress Concentration Factor*Nominal Stress

Load on Rectangular Plate with Transverse Hole given Nominal Stress Formula

LaTeX Go

Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate
P = σ_o*(w-d_h)*t

What is stress concentration?

Stress concentration is defined as the localization of high stresses due to the irregularities present in the component and abrupt changes in the cross-section. In order to consider the effect of stress concentration and find out localized stresses, a factor called the stress concentration factor is used.

How to Calculate Load on Rectangular Plate with Transverse Hole given Nominal Stress?

Load on Rectangular Plate with Transverse Hole given Nominal Stress calculator uses Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate to calculate the Load on Flat Plate, The Load on Rectangular plate with Transverse hole given Nominal stress is the load acting onto a rectangular plate with the transverse hole with stress concentration. Load on Flat Plate is denoted by P symbol.

How to calculate Load on Rectangular Plate with Transverse Hole given Nominal Stress using this online calculator? To use this online calculator for Load on Rectangular Plate with Transverse Hole given Nominal Stress, enter Nominal Stress (σ_o), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t) and hit the calculate button. Here is how the Load on Rectangular Plate with Transverse Hole given Nominal Stress calculation can be explained with given input values -> 8750 = 25000000*(0.07-0.03501)*0.01.

FAQ

What is Load on Rectangular Plate with Transverse Hole given Nominal Stress?

The Load on Rectangular plate with Transverse hole given Nominal stress is the load acting onto a rectangular plate with the transverse hole with stress concentration and is represented as P = σ_o*(w-d_h)*t or Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate. The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications, The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications, The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity & The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

How to calculate Load on Rectangular Plate with Transverse Hole given Nominal Stress?

The Load on Rectangular plate with Transverse hole given Nominal stress is the load acting onto a rectangular plate with the transverse hole with stress concentration is calculated using Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate. To calculate Load on Rectangular Plate with Transverse Hole given Nominal Stress, you need Nominal Stress (σ_o), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t). With our tool, you need to enter the respective value for Nominal Stress, Width of Plate, Diameter of Transverse Hole in Plate & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search