Load on Power Screw given Torque Required to Lift Load Calculator

✖Torque for lifting load is described as the turning effect of force on the axis of rotation that is required in lifting the load.ⓘ Torque for lifting load [Mt_li]			+10% -10%
✖Mean Diameter of Power Screw is the average diameter of the bearing surface - or more accurately, twice the average distance from the centreline of the thread to the bearing surface.ⓘ Mean Diameter of Power Screw [d_m]			+10% -10%
✖Coefficient of friction at screw thread is the ratio defining the force that resists the motion of the nut in relation to the threads in contact with it.ⓘ Coefficient of friction at screw thread [μ]			+10% -10%
✖Helix angle of screw is defined as the angle subtended between this unwound circumferential line and the pitch of the helix.ⓘ Helix angle of screw [α]			+10% -10%

✖Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.ⓘ Load on Power Screw given Torque Required to Lift Load [W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power Screws Formulas PDF PDF Image

Load on Power Screw given Torque Required to Lift Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on screw = (2*Torque for lifting load/Mean Diameter of Power Screw)*((1-Coefficient of friction at screw thread*tan(Helix angle of screw))/(Coefficient of friction at screw thread+tan(Helix angle of screw)))
W = (2*Mt_li/d_m)*((1-μ*tan(α))/(μ+tan(α)))
This formula uses 1 Functions, 5 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)

Variables Used

Load on screw - (Measured in Newton) - Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.
Torque for lifting load - (Measured in Newton Meter) - Torque for lifting load is described as the turning effect of force on the axis of rotation that is required in lifting the load.
Mean Diameter of Power Screw - (Measured in Meter) - Mean Diameter of Power Screw is the average diameter of the bearing surface - or more accurately, twice the average distance from the centreline of the thread to the bearing surface.
Coefficient of friction at screw thread - Coefficient of friction at screw thread is the ratio defining the force that resists the motion of the nut in relation to the threads in contact with it.
Helix angle of screw - (Measured in Radian) - Helix angle of screw is defined as the angle subtended between this unwound circumferential line and the pitch of the helix.

STEP 1: Convert Input(s) to Base Unit

Torque for lifting load: 9265 Newton Millimeter --> 9.265 Newton Meter (Check conversion here)
Mean Diameter of Power Screw: 46 Millimeter --> 0.046 Meter (Check conversion here)
Coefficient of friction at screw thread: 0.15 --> No Conversion Required
Helix angle of screw: 4.5 Degree --> 0.0785398163397301 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W = (2*Mt_li/d_m)*((1-μ*tan(α))/(μ+tan(α))) --> (2*9.265/0.046)*((1-0.15*tan(0.0785398163397301))/(0.15+tan(0.0785398163397301)))

Evaluating ... ...

W = 1740.56690434876

STEP 3: Convert Result to Output's Unit

1740.56690434876 Newton --> No Conversion Required

FINAL ANSWER

1740.56690434876 ≈ 1740.567 Newton <-- Load on screw

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Power Screws » Torque Requirement in Lifting Load using Square Threaded Screw » Load on Power Screw given Torque Required to Lift Load

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Torque Requirement in Lifting Load using Square Threaded Screw Calculators

Coefficient of Friction of Power Screw given Effort Required to Lift Load

LaTeX Go Coefficient of friction at screw thread = (Effort in lifting load-Load on screw*tan(Helix angle of screw))/(Load on screw+Effort in lifting load*tan(Helix angle of screw))

Helix Angle of Power Screw given Effort Required to Lift Load

LaTeX Go Helix angle of screw = atan((Effort in lifting load-Load on screw*Coefficient of friction at screw thread)/(Effort in lifting load*Coefficient of friction at screw thread+Load on screw))

Load on Power Screw given Effort Required to Lift Load

LaTeX Go Load on screw = Effort in lifting load/((Coefficient of friction at screw thread+tan(Helix angle of screw))/(1-Coefficient of friction at screw thread*tan(Helix angle of screw)))

Effort Required in Lifting load using Power Screw

LaTeX Go Effort in lifting load = Load on screw*((Coefficient of friction at screw thread+tan(Helix angle of screw))/(1-Coefficient of friction at screw thread*tan(Helix angle of screw)))

Load on Power Screw given Torque Required to Lift Load Formula

LaTeX Go

Define Torque?

Torque is a measure of the force that can cause an object to rotate about an axis. Just as force is what causes an object to accelerate in linear kinematics, torque is what causes an object to acquire angular acceleration. Torque is a vector quantity.

How to Calculate Load on Power Screw given Torque Required to Lift Load?

Load on Power Screw given Torque Required to Lift Load calculator uses Load on screw = (2*Torque for lifting load/Mean Diameter of Power Screw)*((1-Coefficient of friction at screw thread*tan(Helix angle of screw))/(Coefficient of friction at screw thread+tan(Helix angle of screw))) to calculate the Load on screw, Load on Power Screw given Torque Required to Lift Load is defined as a heavy or a bulky object that requires effort to move or lift the load. The effort is an applied force to bring desired change to the position (push or lift) of the load. It acts vertically downwards. Load on screw is denoted by W symbol.

How to calculate Load on Power Screw given Torque Required to Lift Load using this online calculator? To use this online calculator for Load on Power Screw given Torque Required to Lift Load, enter Torque for lifting load (Mt_li), Mean Diameter of Power Screw (d_m), Coefficient of friction at screw thread (μ) & Helix angle of screw (α) and hit the calculate button. Here is how the Load on Power Screw given Torque Required to Lift Load calculation can be explained with given input values -> 1740.567 = (2*9.265/0.046)*((1-0.15*tan(0.0785398163397301))/(0.15+tan(0.0785398163397301))).

FAQ

What is Load on Power Screw given Torque Required to Lift Load?

Load on Power Screw given Torque Required to Lift Load is defined as a heavy or a bulky object that requires effort to move or lift the load. The effort is an applied force to bring desired change to the position (push or lift) of the load. It acts vertically downwards and is represented as W = (2*Mt_li/d_m)*((1-μ*tan(α))/(μ+tan(α))) or Load on screw = (2*Torque for lifting load/Mean Diameter of Power Screw)*((1-Coefficient of friction at screw thread*tan(Helix angle of screw))/(Coefficient of friction at screw thread+tan(Helix angle of screw))). Torque for lifting load is described as the turning effect of force on the axis of rotation that is required in lifting the load, Mean Diameter of Power Screw is the average diameter of the bearing surface - or more accurately, twice the average distance from the centreline of the thread to the bearing surface, Coefficient of friction at screw thread is the ratio defining the force that resists the motion of the nut in relation to the threads in contact with it & Helix angle of screw is defined as the angle subtended between this unwound circumferential line and the pitch of the helix.

How to calculate Load on Power Screw given Torque Required to Lift Load?

Load on Power Screw given Torque Required to Lift Load is defined as a heavy or a bulky object that requires effort to move or lift the load. The effort is an applied force to bring desired change to the position (push or lift) of the load. It acts vertically downwards is calculated using Load on screw = (2*Torque for lifting load/Mean Diameter of Power Screw)*((1-Coefficient of friction at screw thread*tan(Helix angle of screw))/(Coefficient of friction at screw thread+tan(Helix angle of screw))). To calculate Load on Power Screw given Torque Required to Lift Load, you need Torque for lifting load (Mt_li), Mean Diameter of Power Screw (d_m), Coefficient of friction at screw thread (μ) & Helix angle of screw (α). With our tool, you need to enter the respective value for Torque for lifting load, Mean Diameter of Power Screw, Coefficient of friction at screw thread & Helix angle of screw and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load on screw?

In this formula, Load on screw uses Torque for lifting load, Mean Diameter of Power Screw, Coefficient of friction at screw thread & Helix angle of screw. We can use 1 other way(s) to calculate the same, which is/are as follows -

Load on screw = Effort in lifting load/((Coefficient of friction at screw thread+tan(Helix angle of screw))/(1-Coefficient of friction at screw thread*tan(Helix angle of screw)))

Home

FREE PDFs

🔍 Search