LCM calculator

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load Calculator

Physics Chemistry Engineering Financial More >>

↳

Mechanical Aerospace Basic Physics Others and Extra

⤿

Theory of Machine Automobile Design of Automobile Elements Design of Machine Elements More >>

⤿

Vibrations Balancing of Rotating Masses Belt, Rope and Chain Drives Brakes and Dynamometers More >>

⤿

Longitudinal and Transverse Vibrations Torsional Vibrations

⤿

Natural Frequency of Free Transverse Vibrations Load for Various Types of Beams and Load Conditions Critical or Whirling Speed of Shaft Effect of Inertia of Constraint in Longitudinal and Transverse Vibrations More >>

⤿

Shaft Fixed at Both Ends Carrying a Uniformly Distributed Load General Shaft Shaft Subjected to a Number of Point Loads Uniformly Distributed Load Acting Over a Simply Supported Shaft

✖Young's Modulus is a measure of the stiffness of a solid material and is used to calculate the natural frequency of free transverse vibrations.ⓘ Young's Modulus [E]			+10% -10%
✖Moment of inertia of shaft is the measure of an object's resistance to changes in its rotation, influencing natural frequency of free transverse vibrations.ⓘ Moment of inertia of shaft [I_shaft]			+10% -10%
✖Acceleration due to Gravity is the rate of change of velocity of an object under the influence of gravitational force, affecting natural frequency of free transverse vibrations.ⓘ Acceleration due to Gravity [g]			+10% -10%
✖Length of Shaft is the distance from the axis of rotation to the point of maximum vibration amplitude in a transversely vibrating shaft.ⓘ Length of Shaft [L_shaft]			+10% -10%
✖Frequency is the number of oscillations or cycles per second of a system undergoing free transverse vibrations, characterizing its natural vibrational behavior.ⓘ Frequency [f]			+10% -10%

✖Load per unit length is the force per unit length applied to a system, affecting its natural frequency of free transverse vibrations.ⓘ Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load [w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Longitudinal and Transverse Vibrations Formula PDF PDF Image

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load per unit length = (3.573^2)*((Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Frequency^2))
w = (3.573^2)*((E*I_shaft*g)/(L_shaft^4*f^2))
This formula uses 6 Variables

Variables Used

Load per unit length - Load per unit length is the force per unit length applied to a system, affecting its natural frequency of free transverse vibrations.
Young's Modulus - (Measured in Newton per Meter) - Young's Modulus is a measure of the stiffness of a solid material and is used to calculate the natural frequency of free transverse vibrations.
Moment of inertia of shaft - (Measured in Kilogram Square Meter) - Moment of inertia of shaft is the measure of an object's resistance to changes in its rotation, influencing natural frequency of free transverse vibrations.
Acceleration due to Gravity - (Measured in Meter per Square Second) - Acceleration due to Gravity is the rate of change of velocity of an object under the influence of gravitational force, affecting natural frequency of free transverse vibrations.
Length of Shaft - (Measured in Meter) - Length of Shaft is the distance from the axis of rotation to the point of maximum vibration amplitude in a transversely vibrating shaft.
Frequency - (Measured in Hertz) - Frequency is the number of oscillations or cycles per second of a system undergoing free transverse vibrations, characterizing its natural vibrational behavior.

STEP 1: Convert Input(s) to Base Unit

Young's Modulus: 15 Newton per Meter --> 15 Newton per Meter No Conversion Required
Moment of inertia of shaft: 1.085522 Kilogram Square Meter --> 1.085522 Kilogram Square Meter No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Length of Shaft: 3.5 Meter --> 3.5 Meter No Conversion Required
Frequency: 90 Hertz --> 90 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = (3.573^2)*((E*I_shaft*g)/(L_shaft^4*f^2)) --> (3.573^2)*((15*1.085522*9.8)/(3.5^4*90^2))

Evaluating ... ...

w = 0.00167596444308245

STEP 3: Convert Result to Output's Unit

0.00167596444308245 --> No Conversion Required

FINAL ANSWER

0.00167596444308245 ≈ 0.001676 <-- Load per unit length

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Vibrations » Longitudinal and Transverse Vibrations » Natural Frequency of Free Transverse Vibrations » Mechanical » Shaft Fixed at Both Ends Carrying a Uniformly Distributed Load » Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Shaft Fixed at Both Ends Carrying a Uniformly Distributed Load Calculators

M.I of Shaft given Static Deflection for Fixed Shaft and Uniformly Distributed Load

LaTeX Go Moment of inertia of shaft = (Load per unit length*Length of Shaft^4)/(384*Young's Modulus*Static Deflection)

Circular Frequency given Static Deflection (Shaft Fixed, Uniformly Distributed Load)

LaTeX Go Natural Circular Frequency = (2*pi*0.571)/(sqrt(Static Deflection))

Natural Frequency given Static Deflection (Shaft Fixed, Uniformly Distributed Load)

LaTeX Go Frequency = 0.571/(sqrt(Static Deflection))

Static Deflection given Natural Frequency (Shaft Fixed, Uniformly Distributed Load)

LaTeX Go Static Deflection = (0.571/Frequency)^2

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load Formula

LaTeX Go

Load per unit length = (3.573^2)*((Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Frequency^2))
w = (3.573^2)*((E*I_shaft*g)/(L_shaft^4*f^2))

What is a Transverse Wave definition?

Transverse wave, motion in which all points on a wave oscillate along paths at right angles to the direction of the wave's advance. Surface ripples on water, seismic S (secondary) waves, and electromagnetic (e.g., radio and light) waves are examples of transverse waves.

How to Calculate Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load?

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load calculator uses Load per unit length = (3.573^2)*((Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Frequency^2)) to calculate the Load per unit length, Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load formula is defined as a measure of the natural frequency of free transverse vibrations of a fixed shaft under uniformly distributed load, which is essential in determining the dynamic behavior of the shaft in various mechanical systems. Load per unit length is denoted by w symbol.

How to calculate Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load using this online calculator? To use this online calculator for Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load, enter Young's Modulus (E), Moment of inertia of shaft (I_shaft), Acceleration due to Gravity (g), Length of Shaft (L_shaft) & Frequency (f) and hit the calculate button. Here is how the Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load calculation can be explained with given input values -> 0.001676 = (3.573^2)*((15*1.085522*9.8)/(3.5^4*90^2)).

FAQ

What is Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load?

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load formula is defined as a measure of the natural frequency of free transverse vibrations of a fixed shaft under uniformly distributed load, which is essential in determining the dynamic behavior of the shaft in various mechanical systems and is represented as w = (3.573^2)*((E*I_shaft*g)/(L_shaft^4*f^2)) or Load per unit length = (3.573^2)*((Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Frequency^2)). Young's Modulus is a measure of the stiffness of a solid material and is used to calculate the natural frequency of free transverse vibrations, Moment of inertia of shaft is the measure of an object's resistance to changes in its rotation, influencing natural frequency of free transverse vibrations, Acceleration due to Gravity is the rate of change of velocity of an object under the influence of gravitational force, affecting natural frequency of free transverse vibrations, Length of Shaft is the distance from the axis of rotation to the point of maximum vibration amplitude in a transversely vibrating shaft & Frequency is the number of oscillations or cycles per second of a system undergoing free transverse vibrations, characterizing its natural vibrational behavior.

How to calculate Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load?

Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load formula is defined as a measure of the natural frequency of free transverse vibrations of a fixed shaft under uniformly distributed load, which is essential in determining the dynamic behavior of the shaft in various mechanical systems is calculated using Load per unit length = (3.573^2)*((Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Frequency^2)). To calculate Load given Natural Frequency for Fixed Shaft and Uniformly Distributed Load, you need Young's Modulus (E), Moment of inertia of shaft (I_shaft), Acceleration due to Gravity (g), Length of Shaft (L_shaft) & Frequency (f). With our tool, you need to enter the respective value for Young's Modulus, Moment of inertia of shaft, Acceleration due to Gravity, Length of Shaft & Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load per unit length?

In this formula, Load per unit length uses Young's Modulus, Moment of inertia of shaft, Acceleration due to Gravity, Length of Shaft & Frequency. We can use 2 other way(s) to calculate the same, which is/are as follows -

Load per unit length = ((504*Young's Modulus*Moment of inertia of shaft*Acceleration due to Gravity)/(Length of Shaft^4*Natural Circular Frequency^2))
Load per unit length = ((Static Deflection*384*Young's Modulus*Moment of inertia of shaft)/(Length of Shaft^4))

Home

FREE PDFs

🔍 Search