Load Current using Transmission Efficiency in Nominal Pi Method Calculator

✖Receiving End Power in PI is defined as the power at receiving end in a medium transmission line.ⓘ Receiving End Power in PI [P_r(pi)]			+10% -10%
✖Transmission Efficiency in PI is the total sideband power by the total transmitted power.ⓘ Transmission Efficiency in PI [η_pi]			+10% -10%
✖Resistance in PI is a measure of the opposition to current flow in a medium length transmission line.ⓘ Resistance in PI [R_pi]			+10% -10%

✖The Load Current in PI is the current that the appliance is drawing at that instant.ⓘ Load Current using Transmission Efficiency in Nominal Pi Method [I_L(pi)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal Pi Method in Medium Line Formulas PDF PDF Image

Load Current using Transmission Efficiency in Nominal Pi Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load Current in PI = sqrt(((Receiving End Power in PI/Transmission Efficiency in PI)-Receiving End Power in PI)/Resistance in PI*3)
I_L(pi) = sqrt(((P_r(pi)/η_pi)-P_r(pi))/R_pi*3)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Load Current in PI - (Measured in Ampere) - The Load Current in PI is the current that the appliance is drawing at that instant.
Receiving End Power in PI - (Measured in Watt) - Receiving End Power in PI is defined as the power at receiving end in a medium transmission line.
Transmission Efficiency in PI - Transmission Efficiency in PI is the total sideband power by the total transmitted power.
Resistance in PI - (Measured in Ohm) - Resistance in PI is a measure of the opposition to current flow in a medium length transmission line.

STEP 1: Convert Input(s) to Base Unit

Receiving End Power in PI: 250.1 Watt --> 250.1 Watt No Conversion Required
Transmission Efficiency in PI: 0.745 --> No Conversion Required
Resistance in PI: 7.54 Ohm --> 7.54 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_L(pi) = sqrt(((P_r(pi)/η_pi)-P_r(pi))/R_pi*3) --> sqrt(((250.1/0.745)-250.1)/7.54*3)

Evaluating ... ...

I_L(pi) = 5.83611383225982

STEP 3: Convert Result to Output's Unit

5.83611383225982 Ampere --> No Conversion Required

FINAL ANSWER

5.83611383225982 ≈ 5.836114 Ampere <-- Load Current in PI

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal Pi Method in Medium Line » Load Current using Transmission Efficiency in Nominal Pi Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< Nominal Pi Method in Medium Line Calculators

Receiving End Voltage using Sending End Power in Nominal Pi Method

LaTeX Go Receiving End Voltage in PI = (Sending End Power in PI-Power Loss in PI)/(Receiving End Current in PI*cos(Receiving End Phase Angle in PI))

Load Current using Losses in Nominal Pi Method

LaTeX Go Load Current in PI = sqrt(Power Loss in PI/Resistance in PI)

Losses in Nominal Pi Method

LaTeX Go Power Loss in PI = (Load Current in PI^2)*Resistance in PI

Resistance using Losses in Nominal Pi Method

LaTeX Go Resistance in PI = Power Loss in PI/Load Current in PI^2

Load Current using Transmission Efficiency in Nominal Pi Method Formula

LaTeX Go

Load Current in PI = sqrt(((Receiving End Power in PI/Transmission Efficiency in PI)-Receiving End Power in PI)/Resistance in PI*3)
I_L(pi) = sqrt(((P_r(pi)/η_pi)-P_r(pi))/R_pi*3)

Which of the following transmission line can be considered as a medium transmission line?

The transmission lines having a length of more than ₈₀ Km and less than ₂₀₀ Km are considered medium transmission lines. Their operating voltage is more than short transmission lines but less than long transmission lines.

How to Calculate Load Current using Transmission Efficiency in Nominal Pi Method?

Load Current using Transmission Efficiency in Nominal Pi Method calculator uses Load Current in PI = sqrt(((Receiving End Power in PI/Transmission Efficiency in PI)-Receiving End Power in PI)/Resistance in PI*3) to calculate the Load Current in PI, The Load Current using Transmission Efficiency in Nominal Pi method formula is defined as the current that flows into the load of the medium transmission line. Load Current in PI is denoted by I_L(pi) symbol.

How to calculate Load Current using Transmission Efficiency in Nominal Pi Method using this online calculator? To use this online calculator for Load Current using Transmission Efficiency in Nominal Pi Method, enter Receiving End Power in PI (P_r(pi)), Transmission Efficiency in PI (η_pi) & Resistance in PI (R_pi) and hit the calculate button. Here is how the Load Current using Transmission Efficiency in Nominal Pi Method calculation can be explained with given input values -> 5.847759 = sqrt(((250.1/0.745)-250.1)/7.54*3).

FAQ

What is Load Current using Transmission Efficiency in Nominal Pi Method?

The Load Current using Transmission Efficiency in Nominal Pi method formula is defined as the current that flows into the load of the medium transmission line and is represented as I_L(pi) = sqrt(((P_r(pi)/η_pi)-P_r(pi))/R_pi*3) or Load Current in PI = sqrt(((Receiving End Power in PI/Transmission Efficiency in PI)-Receiving End Power in PI)/Resistance in PI*3). Receiving End Power in PI is defined as the power at receiving end in a medium transmission line, Transmission Efficiency in PI is the total sideband power by the total transmitted power & Resistance in PI is a measure of the opposition to current flow in a medium length transmission line.

How to calculate Load Current using Transmission Efficiency in Nominal Pi Method?

The Load Current using Transmission Efficiency in Nominal Pi method formula is defined as the current that flows into the load of the medium transmission line is calculated using Load Current in PI = sqrt(((Receiving End Power in PI/Transmission Efficiency in PI)-Receiving End Power in PI)/Resistance in PI*3). To calculate Load Current using Transmission Efficiency in Nominal Pi Method, you need Receiving End Power in PI (P_r(pi)), Transmission Efficiency in PI (η_pi) & Resistance in PI (R_pi). With our tool, you need to enter the respective value for Receiving End Power in PI, Transmission Efficiency in PI & Resistance in PI and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load Current in PI?

In this formula, Load Current in PI uses Receiving End Power in PI, Transmission Efficiency in PI & Resistance in PI. We can use 1 other way(s) to calculate the same, which is/are as follows -

Load Current in PI = sqrt(Power Loss in PI/Resistance in PI)

Home

FREE PDFs

🔍 Search