Load Current using Line Losses(DC Two-Wire OS) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))
I = sqrt(Ploss/(2*R))
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Current Overhead DC - (Measured in Ampere) - Current Overhead DC is defined as the current flowing through the overhead ac supply wire.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead DC line when in use.
Resistance Overhead DC - (Measured in Ohm) - Resistance Overhead DC is defined as the property of the wire or line that opposes the flow of current through it.
STEP 1: Convert Input(s) to Base Unit
Line Losses: 0.74 Watt --> 0.74 Watt No Conversion Required
Resistance Overhead DC: 5.6 Ohm --> 5.6 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
I = sqrt(Ploss/(2*R)) --> sqrt(0.74/(2*5.6))
Evaluating ... ...
I = 0.257043631649237
STEP 3: Convert Result to Output's Unit
0.257043631649237 Ampere --> No Conversion Required
FINAL ANSWER
0.257043631649237 0.257044 Ampere <-- Current Overhead DC
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

2 Wire System Calculators

Length using Volume of Conductor Material (DC 2-Wire OS)
​ LaTeX ​ Go Length of Wire DC = sqrt(Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((4)*Resistivity*(Power Transmitted^2)))
Maximum Voltage using Area of X-Section(DC Two-Wire OS)
​ LaTeX ​ Go Maximum Voltage Overhead DC = sqrt((Power Transmitted^2)*Resistivity*Length of Wire DC/(Area of Overhead DC Wire*Line Losses))
Resistance(2-Wire DC OS)
​ LaTeX ​ Go Resistance Overhead DC = Resistivity*Length of Wire DC/Area of Overhead DC Wire
Load Current using Line Losses(DC Two-Wire OS)
​ LaTeX ​ Go Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))

Load Current using Line Losses(DC Two-Wire OS) Formula

​LaTeX ​Go
Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))
I = sqrt(Ploss/(2*R))

What is the two-wire one conductor earthed system?

The load is connected between the two wires. where a1 is the area of the X-section of the conductor. It is a usual practice to make this system the basis for comparison with other systems.

How to Calculate Load Current using Line Losses(DC Two-Wire OS)?

Load Current using Line Losses(DC Two-Wire OS) calculator uses Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)) to calculate the Current Overhead DC, The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system. Current Overhead DC is denoted by I symbol.

How to calculate Load Current using Line Losses(DC Two-Wire OS) using this online calculator? To use this online calculator for Load Current using Line Losses(DC Two-Wire OS), enter Line Losses (Ploss) & Resistance Overhead DC (R) and hit the calculate button. Here is how the Load Current using Line Losses(DC Two-Wire OS) calculation can be explained with given input values -> 0.257044 = sqrt(0.74/(2*5.6)).

FAQ

What is Load Current using Line Losses(DC Two-Wire OS)?
The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system and is represented as I = sqrt(Ploss/(2*R)) or Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)). Line Losses is defined as the total losses occurring in an Overhead DC line when in use & Resistance Overhead DC is defined as the property of the wire or line that opposes the flow of current through it.
How to calculate Load Current using Line Losses(DC Two-Wire OS)?
The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system is calculated using Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)). To calculate Load Current using Line Losses(DC Two-Wire OS), you need Line Losses (Ploss) & Resistance Overhead DC (R). With our tool, you need to enter the respective value for Line Losses & Resistance Overhead DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!