Load Current using Line Losses(DC Two-Wire OS) Calculator

✖Line Losses is defined as the total losses occurring in an Overhead DC line when in use.ⓘ Line Losses [P_loss]			+10% -10%
✖Resistance Overhead DC is defined as the property of the wire or line that opposes the flow of current through it.ⓘ Resistance Overhead DC [R]			+10% -10%

✖Current Overhead DC is defined as the current flowing through the overhead ac supply wire.ⓘ Load Current using Line Losses(DC Two-Wire OS) [I]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Load Current using Line Losses(DC Two-Wire OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))
I = sqrt(P_loss/(2*R))
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Current Overhead DC - (Measured in Ampere) - Current Overhead DC is defined as the current flowing through the overhead ac supply wire.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead DC line when in use.
Resistance Overhead DC - (Measured in Ohm) - Resistance Overhead DC is defined as the property of the wire or line that opposes the flow of current through it.

STEP 1: Convert Input(s) to Base Unit

Line Losses: 0.74 Watt --> 0.74 Watt No Conversion Required
Resistance Overhead DC: 5.6 Ohm --> 5.6 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I = sqrt(P_loss/(2*R)) --> sqrt(0.74/(2*5.6))

Evaluating ... ...

I = 0.257043631649237

STEP 3: Convert Result to Output's Unit

0.257043631649237 Ampere --> No Conversion Required

FINAL ANSWER

0.257043631649237 ≈ 0.257044 Ampere <-- Current Overhead DC

(Calculation completed in 00.022 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead DC Supply » 2 Wire System » Load Current using Line Losses(DC Two-Wire OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 2 Wire System Calculators

Length using Volume of Conductor Material (DC 2-Wire OS)

LaTeX Go Length of Wire DC = sqrt(Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((4)*Resistivity*(Power Transmitted^2)))

Maximum Voltage using Area of X-Section(DC Two-Wire OS)

LaTeX Go Maximum Voltage Overhead DC = sqrt((Power Transmitted^2)*Resistivity*Length of Wire DC/(Area of Overhead DC Wire*Line Losses))

Resistance(2-Wire DC OS)

LaTeX Go Resistance Overhead DC = Resistivity*Length of Wire DC/Area of Overhead DC Wire

Load Current using Line Losses(DC Two-Wire OS)

LaTeX Go Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))

Load Current using Line Losses(DC Two-Wire OS) Formula

LaTeX Go

Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC))
I = sqrt(P_loss/(2*R))

What is the two-wire one conductor earthed system?

The load is connected between the two wires. where a1 is the area of the X-section of the conductor. It is a usual practice to make this system the basis for comparison with other systems.

How to Calculate Load Current using Line Losses(DC Two-Wire OS)?

Load Current using Line Losses(DC Two-Wire OS) calculator uses Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)) to calculate the Current Overhead DC, The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system. Current Overhead DC is denoted by I symbol.

How to calculate Load Current using Line Losses(DC Two-Wire OS) using this online calculator? To use this online calculator for Load Current using Line Losses(DC Two-Wire OS), enter Line Losses (P_loss) & Resistance Overhead DC (R) and hit the calculate button. Here is how the Load Current using Line Losses(DC Two-Wire OS) calculation can be explained with given input values -> 0.257044 = sqrt(0.74/(2*5.6)).

FAQ

What is Load Current using Line Losses(DC Two-Wire OS)?

The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system and is represented as I = sqrt(P_loss/(2*R)) or Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)). Line Losses is defined as the total losses occurring in an Overhead DC line when in use & Resistance Overhead DC is defined as the property of the wire or line that opposes the flow of current through it.

How to calculate Load Current using Line Losses(DC Two-Wire OS)?

The Load Current using Line Losses(DC Two-Wire OS) formula is defined as the current required by the Two-Wire One Conductor Earthed system is calculated using Current Overhead DC = sqrt(Line Losses/(2*Resistance Overhead DC)). To calculate Load Current using Line Losses(DC Two-Wire OS), you need Line Losses (P_loss) & Resistance Overhead DC (R). With our tool, you need to enter the respective value for Line Losses & Resistance Overhead DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search