Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose Calculator

✖Design Power of Belt Drive is defined as the power transmitted on the basis of the design.ⓘ Design Power of Belt Drive [P_d]			+10% -10%
✖Power transmitted by belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.ⓘ Power transmitted by belt [P_t]			+10% -10%

✖Load Correction Factor increases the power factor of a load, improving efficiency for the distribution system to which it is attached.ⓘ Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose [F_a]

⎘ Copy

👎

Formula

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load Correction Factor = Design Power of Belt Drive/Power transmitted by belt
F_a = P_d/P_t
This formula uses 3 Variables

Variables Used

Load Correction Factor - Load Correction Factor increases the power factor of a load, improving efficiency for the distribution system to which it is attached.
Design Power of Belt Drive - (Measured in Watt) - Design Power of Belt Drive is defined as the power transmitted on the basis of the design.
Power transmitted by belt - (Measured in Watt) - Power transmitted by belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.

STEP 1: Convert Input(s) to Base Unit

Design Power of Belt Drive: 7.41 Kilowatt --> 7410 Watt (Check conversion here)
Power transmitted by belt: 6.45 Kilowatt --> 6450 Watt (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_a = P_d/P_t --> 7410/6450

Evaluating ... ...

F_a = 1.14883720930233

STEP 3: Convert Result to Output's Unit

1.14883720930233 --> No Conversion Required

FINAL ANSWER

1.14883720930233 ≈ 1.148837 <-- Load Correction Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » Maximum Power Conditions » Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Maximum Power Conditions Calculators

Optimum Velocity of Belt for Maximum Power Transmission

Go Optimum Velocity of Belt = sqrt(Initial Tension in Belt/(3*Mass of Meter Length of Belt))

Initial Tension in Belt Drive

Go Initial Tension in Belt = (Belt Tension on Tight Side+Belt Tension on Loose Side)/2

Belt Tension in Tight Side of Belt given Initial Tension in Belt

Go Belt Tension on Tight Side = 2*Initial Tension in Belt-Belt Tension on Loose Side

Belt Tension in Loose Side of Belt given Initial Tension in Belt

Go Belt Tension on Loose Side = 2*Initial Tension in Belt-Belt Tension on Tight Side

Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose Formula

Load Correction Factor = Design Power of Belt Drive/Power transmitted by belt
F_a = P_d/P_t

Define Flat Belts?

A flat belt is a belt with a flat surface, usually evenly textured on both sides, used in a pulley system. In conveyer belt construction, the flat belt can be used as a single broad belt on an assembly line or as part of an array of webbed belts.

How to Calculate Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose?

Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose calculator uses Load Correction Factor = Design Power of Belt Drive/Power transmitted by belt to calculate the Load Correction Factor, The Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose formula increases the power factor of a load, improving efficiency for the distribution system to which it is attached. Load Correction Factor is denoted by F_a symbol.

How to calculate Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose using this online calculator? To use this online calculator for Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose, enter Design Power of Belt Drive (P_d) & Power transmitted by belt (P_t) and hit the calculate button. Here is how the Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose calculation can be explained with given input values -> 1.148837 = 7410/6450.

FAQ

What is Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose?

The Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose formula increases the power factor of a load, improving efficiency for the distribution system to which it is attached and is represented as F_a = P_d/P_t or Load Correction Factor = Design Power of Belt Drive/Power transmitted by belt. Design Power of Belt Drive is defined as the power transmitted on the basis of the design & Power transmitted by belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.

How to calculate Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose?

The Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose formula increases the power factor of a load, improving efficiency for the distribution system to which it is attached is calculated using Load Correction Factor = Design Power of Belt Drive/Power transmitted by belt. To calculate Load Correction Factor given Power Transmitted by Flat Belt for Design Purpose, you need Design Power of Belt Drive (P_d) & Power transmitted by belt (P_t). With our tool, you need to enter the respective value for Design Power of Belt Drive & Power transmitted by belt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search