Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads Calculator

✖ultimate strengths is the capacities to resist design loads and their related internal moments and forces.ⓘ Ultimate Strength [U]			+10% -10%
✖Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).ⓘ Dead Load [DL]			+10% -10%

✖Live Load are variable as they depend on usage and capacity.ⓘ Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads [LL]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Two Way Slab System and Footing Formulas PDF PDF Image

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads Solution

STEP 0: Pre-Calculation Summary

Formula Used

Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)
LL = (U-(1.4*DL))/(1.7)
This formula uses 3 Variables

Variables Used

Live Load - (Measured in Pascal) - Live Load are variable as they depend on usage and capacity.
Ultimate Strength - (Measured in Pascal) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Dead Load - (Measured in Pascal) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).

STEP 1: Convert Input(s) to Base Unit

Ultimate Strength: 20 Kilonewton per Square Meter --> 20000 Pascal (Check conversion here)
Dead Load: 10.01 Kilonewton per Square Meter --> 10010 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

LL = (U-(1.4*DL))/(1.7) --> (20000-(1.4*10010))/(1.7)

Evaluating ... ...

LL = 3521.17647058824

STEP 3: Convert Result to Output's Unit

3521.17647058824 Pascal -->3.52117647058824 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

3.52117647058824 ≈ 3.521176 Kilonewton per Square Meter <-- Live Load

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Design of Two Way Slab System and Footing » Partial Safety Factors for Loads » Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)

Ultimate Strength when Wind and Earthquake Loads are not Applied

LaTeX Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Ultimate Strength when Wind Loads are Applied

LaTeX Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads Formula

LaTeX Go

Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)
LL = (U-(1.4*DL))/(1.7)

What is Live Load?

Live loads are those loads produced by the use and occupancy of a building or structure and do not include construction loads, environmental loads (such as wind loads, snow loads, rain loads, earthquake loads and flood loads) or dead loads

What is Dead Load?

A constant load in a structure (such as a bridge, building, or machine) that is due to the weight of the members, the supported structure, and permanent attachments or accessories.

How to Calculate Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads?

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads calculator uses Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7) to calculate the Live Load, The Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads formula is defined as those loads produced by the use and occupancy of a building or structure and do not include construction loads, environmental loads (such as wind loads, snow loads, rain loads, earthquake loads and flood loads) or dead loads. Live Load is denoted by LL symbol.

How to calculate Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads using this online calculator? To use this online calculator for Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads, enter Ultimate Strength (U) & Dead Load (DL) and hit the calculate button. Here is how the Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads calculation can be explained with given input values -> 0.003529 = (20000-(1.4*10010))/(1.7).

FAQ

What is Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads?

The Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads formula is defined as those loads produced by the use and occupancy of a building or structure and do not include construction loads, environmental loads (such as wind loads, snow loads, rain loads, earthquake loads and flood loads) or dead loads and is represented as LL = (U-(1.4*DL))/(1.7) or Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7). ultimate strengths is the capacities to resist design loads and their related internal moments and forces & Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).

How to calculate Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads?

The Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads formula is defined as those loads produced by the use and occupancy of a building or structure and do not include construction loads, environmental loads (such as wind loads, snow loads, rain loads, earthquake loads and flood loads) or dead loads is calculated using Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7). To calculate Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads, you need Ultimate Strength (U) & Dead Load (DL). With our tool, you need to enter the respective value for Ultimate Strength & Dead Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search