Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction Calculator

✖The Inlet Liquid Flowrate is the inlet Liquid flowrate of solvent liquid to the absorption column.ⓘ Inlet Liquid Flowrate [L₀]			+10% -10%
✖The Liquid Inlet Mole Fraction is the mole fraction of the solute in the liquid stream entering the column.ⓘ Liquid Inlet Mole Fraction [x₁]			+10% -10%

✖The Liquid Flowrate on Solute Free Basis is defined as the Inlet Liquid Flowrate on solute free basis to the absorption column.ⓘ Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction [L_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Gas Absorption and Stripping Formula PDF PDF Image

Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction Solution

STEP 0: Pre-Calculation Summary

Formula Used

Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction)
L_s = L₀*(1-x₁)
This formula uses 3 Variables

Variables Used

Liquid Flowrate on Solute Free Basis - (Measured in Mole per Second) - The Liquid Flowrate on Solute Free Basis is defined as the Inlet Liquid Flowrate on solute free basis to the absorption column.
Inlet Liquid Flowrate - (Measured in Mole per Second) - The Inlet Liquid Flowrate is the inlet Liquid flowrate of solvent liquid to the absorption column.
Liquid Inlet Mole Fraction - The Liquid Inlet Mole Fraction is the mole fraction of the solute in the liquid stream entering the column.

STEP 1: Convert Input(s) to Base Unit

Inlet Liquid Flowrate: 25 Mole per Second --> 25 Mole per Second No Conversion Required
Liquid Inlet Mole Fraction: 0.05 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_s = L₀*(1-x₁) --> 25*(1-0.05)

Evaluating ... ...

L_s = 23.75

STEP 3: Convert Result to Output's Unit

23.75 Mole per Second --> No Conversion Required

FINAL ANSWER

23.75 Mole per Second <-- Liquid Flowrate on Solute Free Basis

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Gas Absorption and Stripping » Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Gas Absorption and Stripping Calculators

Liquid Flowrate on Solute Free Basis for Inlet Conditions by Solute Free Mole Fraction

LaTeX Go Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate/(1+Solute Free Mole Fraction of Liquid in Inlet)

Gas Flowrate on Solute Free Basis for Inlet Conditions by Solute Free Mole Fraction

LaTeX Go Gas Flowrate on Solute Free Basis = Inlet Gas Flowrate/(1+Solute Free Mole Fraction of Gas in Inlet)

Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction

LaTeX Go Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction)

Gas Flowrate on Solute Free Basis for Inlet Conditions by Mole Fraction

LaTeX Go Gas Flowrate on Solute Free Basis = Inlet Gas Flowrate*(1-Gas Inlet Mole Fraction)

< Important Formulas in Gas Absorption and Stripping Calculators

Number of Stripping Stages by Kremser Equation

LaTeX Go Number of Stages = (log10(((Solute Free Mole Frac of Liquid in Stripping Inlet-(Solute Free Mole Frac of Gas in Stripping Inlet/Equilibrium Constant for Mass Transfer))/(Solute Free Mole Frac of Liquid in Stripping Out-(Solute Free Mole Frac of Gas in Stripping Inlet/Equilibrium Constant for Mass Transfer)))*(1-(1/Stripping Factor))+(1/Stripping Factor)))/(log10(Stripping Factor))

Stripping Factor

LaTeX Go Stripping Factor = (Equilibrium Constant for Mass Transfer*Gas Flowrate on Solute Free Basis for Stripping)/Liquid Flowrate on Solute Free Basis for Stripping

Absorption Factor

LaTeX Go Absorption Factor = Liquid Flowrate on Solute Free Basis/(Equilibrium Constant for Mass Transfer*Gas Flowrate on Solute Free Basis)

Stripping Factor given Absorption Factor

LaTeX Go Stripping Factor = 1/Absorption Factor

Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction Formula

LaTeX Go

Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction)
L_s = L₀*(1-x₁)

What is Gas Absorption Operation ?

Gas Absorption is a mass transfer operation in which one or more species (solute) is removed from a gaseous stream by dissolution in a liquid (solvent). The insoluble component(s) present in the gas which is not absorbed is called the carrier gas. The intimate contact between the gas and the liquid is achieved in a suitable equipment or device like a packed column, tray column, spray tower, venturi scrubber, etc. The reverse of absorption is called desorption or stripping.

How to Calculate Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction?

Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction calculator uses Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction) to calculate the Liquid Flowrate on Solute Free Basis, The Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction formula is defined as the Inlet flowrate of Solvent on solute free basis calculated based on Inlet conditions of solvent using Mole Fraction. Liquid Flowrate on Solute Free Basis is denoted by L_s symbol.

How to calculate Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction using this online calculator? To use this online calculator for Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction, enter Inlet Liquid Flowrate (L₀) & Liquid Inlet Mole Fraction (x₁) and hit the calculate button. Here is how the Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction calculation can be explained with given input values -> 23.75 = 25*(1-0.05).

FAQ

What is Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction?

The Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction formula is defined as the Inlet flowrate of Solvent on solute free basis calculated based on Inlet conditions of solvent using Mole Fraction and is represented as L_s = L₀*(1-x₁) or Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction). The Inlet Liquid Flowrate is the inlet Liquid flowrate of solvent liquid to the absorption column & The Liquid Inlet Mole Fraction is the mole fraction of the solute in the liquid stream entering the column.

How to calculate Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction?

The Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction formula is defined as the Inlet flowrate of Solvent on solute free basis calculated based on Inlet conditions of solvent using Mole Fraction is calculated using Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate*(1-Liquid Inlet Mole Fraction). To calculate Liquid Flowrate on Solute Free Basis for Inlet Conditions using Mole Fraction, you need Inlet Liquid Flowrate (L₀) & Liquid Inlet Mole Fraction (x₁). With our tool, you need to enter the respective value for Inlet Liquid Flowrate & Liquid Inlet Mole Fraction and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Liquid Flowrate on Solute Free Basis?

In this formula, Liquid Flowrate on Solute Free Basis uses Inlet Liquid Flowrate & Liquid Inlet Mole Fraction. We can use 3 other way(s) to calculate the same, which is/are as follows -

Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate/(1+Solute Free Mole Fraction of Liquid in Inlet)
Liquid Flowrate on Solute Free Basis = Gas Flowrate on Solute Free Basis*(Solute Free Mole Fraction of Gas in Inlet-Solute Free Mole Fraction of Gas in Outlet)/(Solute Free Mole Fraction of Liquid in Outlet-Solute Free Mole Fraction of Liquid in Inlet)
Liquid Flowrate on Solute Free Basis = Inlet Liquid Flowrate/(1+Solute Free Mole Fraction of Liquid in Inlet)

Home

FREE PDFs

🔍 Search