Line to Neutral Voltage using Real Power Calculator

✖The Real Power P is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load.ⓘ Real Power [P]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%
✖The Line to Neutral Current is a current flow between the line to neutral.ⓘ Line to Neutral Current [I_ln]			+10% -10%

✖The Line to Neutral Voltage (usually referred to as phase voltage) is the voltage between any of the 3 phases and the central star point which is connected to the earth.ⓘ Line to Neutral Voltage using Real Power [V_ln]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download AC Circuits Formula PDF PDF Image

Line to Neutral Voltage using Real Power Solution

STEP 0: Pre-Calculation Summary

Formula Used

Line to Neutral Voltage = Real Power/(3*cos(Phase Difference)*Line to Neutral Current)
V_ln = P/(3*cos(Φ)*I_ln)
This formula uses 1 Functions, 4 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Line to Neutral Voltage - (Measured in Volt) - The Line to Neutral Voltage (usually referred to as phase voltage) is the voltage between any of the 3 phases and the central star point which is connected to the earth.
Real Power - (Measured in Watt) - The Real Power P is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Line to Neutral Current - (Measured in Ampere) - The Line to Neutral Current is a current flow between the line to neutral.

STEP 1: Convert Input(s) to Base Unit

Real Power: 235 Watt --> 235 Watt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Line to Neutral Current: 1.3 Ampere --> 1.3 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_ln = P/(3*cos(Φ)*I_ln) --> 235/(3*cos(0.5235987755982)*1.3)

Evaluating ... ...

V_ln = 69.578109363878

STEP 3: Convert Result to Output's Unit

69.578109363878 Volt --> No Conversion Required

FINAL ANSWER

69.578109363878 ≈ 69.57811 Volt <-- Line to Neutral Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » AC Circuits » Voltage » Line to Neutral Voltage using Real Power

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Voltage Calculators

RMS Voltage using Reactive Power

LaTeX Go Root Mean Square Voltage = Reactive Power/(Root Mean Square Current*sin(Phase Difference))

RMS Voltage using Real Power

LaTeX Go Root Mean Square Voltage = Real Power/(Root Mean Square Current*cos(Phase Difference))

Voltage using Reactive Power

LaTeX Go Voltage = Reactive Power/(Current*sin(Phase Difference))

Voltage using Real Power

LaTeX Go Voltage = Real Power/(Current*cos(Phase Difference))

< AC Circuit Design Calculators

Capacitance for Parallel RLC Circuit using Q Factor

LaTeX Go Capacitance = (Inductance*Parallel RLC Quality Factor^2)/Resistance^2

Capacitance for Series RLC Circuit given Q Factor

LaTeX Go Capacitance = Inductance/(Series RLC Quality Factor^2*Resistance^2)

Capacitance given Cut off Frequency

LaTeX Go Capacitance = 1/(2*Resistance*pi*Cut-off Frequency)

Capacitance using Time Constant

LaTeX Go Capacitance = Time Constant/Resistance

Line to Neutral Voltage using Real Power Formula

LaTeX Go

Line to Neutral Voltage = Real Power/(3*cos(Phase Difference)*Line to Neutral Current)
V_ln = P/(3*cos(Φ)*I_ln)

What is the difference between real power and reactive power?

Real Power is equal to the Reactive Power i.e. there is no VAr in DC Circuits. Only Real Power exists. There is no Reactive Power in DC circuits due to the zero phase angle (Φ) between current and voltage. Real power is important to produce heat and utilize the electric and magnetic field generated by Reactive Power.

How to Calculate Line to Neutral Voltage using Real Power?

Line to Neutral Voltage using Real Power calculator uses Line to Neutral Voltage = Real Power/(3*cos(Phase Difference)*Line to Neutral Current) to calculate the Line to Neutral Voltage, Line to Neutral Voltage using Real Power is the voltage between any of the 3 phases and the central star point which is connected to the earth and real power is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load. Line to Neutral Voltage is denoted by V_ln symbol.

How to calculate Line to Neutral Voltage using Real Power using this online calculator? To use this online calculator for Line to Neutral Voltage using Real Power, enter Real Power (P), Phase Difference (Φ) & Line to Neutral Current (I_ln) and hit the calculate button. Here is how the Line to Neutral Voltage using Real Power calculation can be explained with given input values -> 69.57811 = 235/(3*cos(0.5235987755982)*1.3).

FAQ

What is Line to Neutral Voltage using Real Power?

Line to Neutral Voltage using Real Power is the voltage between any of the 3 phases and the central star point which is connected to the earth and real power is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load and is represented as V_ln = P/(3*cos(Φ)*I_ln) or Line to Neutral Voltage = Real Power/(3*cos(Phase Difference)*Line to Neutral Current). The Real Power P is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load, Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit & The Line to Neutral Current is a current flow between the line to neutral.

How to calculate Line to Neutral Voltage using Real Power?

Line to Neutral Voltage using Real Power is the voltage between any of the 3 phases and the central star point which is connected to the earth and real power is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load is calculated using Line to Neutral Voltage = Real Power/(3*cos(Phase Difference)*Line to Neutral Current). To calculate Line to Neutral Voltage using Real Power, you need Real Power (P), Phase Difference (Φ) & Line to Neutral Current (I_ln). With our tool, you need to enter the respective value for Real Power, Phase Difference & Line to Neutral Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Line to Neutral Voltage?

In this formula, Line to Neutral Voltage uses Real Power, Phase Difference & Line to Neutral Current. We can use 2 other way(s) to calculate the same, which is/are as follows -

Line to Neutral Voltage = Reactive Power/(3*sin(Phase Difference)*Line to Neutral Current)
Line to Neutral Voltage = Reactive Power/(3*sin(Phase Difference)*Line to Neutral Current)

Home

FREE PDFs

🔍 Search