Line to Neutral Current using Reactive Power Calculator

✖Reactive Power is a measure of the energy exchange between the source and the reactive part of the load.ⓘ Reactive Power [Q]			+10% -10%
✖The Line to Neutral Voltage (usually referred to as phase voltage) is the voltage between any of the 3 phases and the central star point which is connected to the earth.ⓘ Line to Neutral Voltage [V_ln]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%

✖The Line to Neutral Current is a current flow between the line to neutral.ⓘ Line to Neutral Current using Reactive Power [I_ln]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download AC Circuit Design Formulas PDF PDF Image

Line to Neutral Current using Reactive Power Solution

STEP 0: Pre-Calculation Summary

Formula Used

Line to Neutral Current = Reactive Power/(3*Line to Neutral Voltage*sin(Phase Difference))
I_ln = Q/(3*V_ln*sin(Φ))
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Line to Neutral Current - (Measured in Ampere) - The Line to Neutral Current is a current flow between the line to neutral.
Reactive Power - (Measured in Watt) - Reactive Power is a measure of the energy exchange between the source and the reactive part of the load.
Line to Neutral Voltage - (Measured in Volt) - The Line to Neutral Voltage (usually referred to as phase voltage) is the voltage between any of the 3 phases and the central star point which is connected to the earth.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.

STEP 1: Convert Input(s) to Base Unit

Reactive Power: 134 Volt Ampere Reactive --> 134 Watt (Check conversion here)
Line to Neutral Voltage: 68.9 Volt --> 68.9 Volt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_ln = Q/(3*V_ln*sin(Φ)) --> 134/(3*68.9*sin(0.5235987755982))

Evaluating ... ...

I_ln = 1.29656507014998

STEP 3: Convert Result to Output's Unit

1.29656507014998 Ampere --> No Conversion Required

FINAL ANSWER

1.29656507014998 ≈ 1.296565 Ampere <-- Line to Neutral Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » AC Circuits » AC Circuit Design » Line to Neutral Current using Reactive Power

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< AC Circuit Design Calculators

Capacitance for Parallel RLC Circuit using Q Factor

LaTeX Go Capacitance = (Inductance*Parallel RLC Quality Factor^2)/Resistance^2

Capacitance for Series RLC Circuit given Q Factor

LaTeX Go Capacitance = Inductance/(Series RLC Quality Factor^2*Resistance^2)

Capacitance given Cut off Frequency

LaTeX Go Capacitance = 1/(2*Resistance*pi*Cut-off Frequency)

Capacitance using Time Constant

LaTeX Go Capacitance = Time Constant/Resistance

Line to Neutral Current using Reactive Power Formula

LaTeX Go

Line to Neutral Current = Reactive Power/(3*Line to Neutral Voltage*sin(Phase Difference))
I_ln = Q/(3*V_ln*sin(Φ))

What is the difference between real power and reactive power?

Real Power is equal to the Reactive Power i.e. there is no VAr in DC Circuits. Only Real Power exists. There is no Reactive Power in DC circuits due to the zero phase angle (Φ) between current and voltage. Real power is important to produce heat and utilize the electric and magnetic field generated by Reactive Power.

How to Calculate Line to Neutral Current using Reactive Power?

Line to Neutral Current using Reactive Power calculator uses Line to Neutral Current = Reactive Power/(3*Line to Neutral Voltage*sin(Phase Difference)) to calculate the Line to Neutral Current, Line to Neutral Current using Reactive Power is a current flow between the line to neutral and reactive power is the power that flows back from a destination toward the grid in an alternating current scenario. Line to Neutral Current is denoted by I_ln symbol.

How to calculate Line to Neutral Current using Reactive Power using this online calculator? To use this online calculator for Line to Neutral Current using Reactive Power, enter Reactive Power (Q), Line to Neutral Voltage (V_ln) & Phase Difference (Φ) and hit the calculate button. Here is how the Line to Neutral Current using Reactive Power calculation can be explained with given input values -> 1.296565 = 134/(3*68.9*sin(0.5235987755982)).

FAQ

What is Line to Neutral Current using Reactive Power?

Line to Neutral Current using Reactive Power is a current flow between the line to neutral and reactive power is the power that flows back from a destination toward the grid in an alternating current scenario and is represented as I_ln = Q/(3*V_ln*sin(Φ)) or Line to Neutral Current = Reactive Power/(3*Line to Neutral Voltage*sin(Phase Difference)). Reactive Power is a measure of the energy exchange between the source and the reactive part of the load, The Line to Neutral Voltage (usually referred to as phase voltage) is the voltage between any of the 3 phases and the central star point which is connected to the earth & Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.

How to calculate Line to Neutral Current using Reactive Power?

Line to Neutral Current using Reactive Power is a current flow between the line to neutral and reactive power is the power that flows back from a destination toward the grid in an alternating current scenario is calculated using Line to Neutral Current = Reactive Power/(3*Line to Neutral Voltage*sin(Phase Difference)). To calculate Line to Neutral Current using Reactive Power, you need Reactive Power (Q), Line to Neutral Voltage (V_ln) & Phase Difference (Φ). With our tool, you need to enter the respective value for Reactive Power, Line to Neutral Voltage & Phase Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Line to Neutral Current?

In this formula, Line to Neutral Current uses Reactive Power, Line to Neutral Voltage & Phase Difference. We can use 1 other way(s) to calculate the same, which is/are as follows -

Line to Neutral Current = Real Power/(3*cos(Phase Difference)*Line to Neutral Voltage)

Home

FREE PDFs

🔍 Search