Line Losses using Load Current (Single-Phase Two-Wire OS) Calculator

✖Resistance Overhead AC is defined as the property of the wire or line that opposes the flow of current through it.ⓘ Resistance Overhead AC [R]			+10% -10%
✖Current Overhead AC is defined as the current flowing through the overhead ac supply wire.ⓘ Current Overhead AC [I]			+10% -10%

✖Line Losses is defined as the total losses occurring in an Overhead AC line when in use.ⓘ Line Losses using Load Current (Single-Phase Two-Wire OS) [P_loss]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Line Losses using Load Current (Single-Phase Two-Wire OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2
P_loss = 2*R*(I)^2
This formula uses 3 Variables

Variables Used

Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead AC line when in use.
Resistance Overhead AC - (Measured in Ohm) - Resistance Overhead AC is defined as the property of the wire or line that opposes the flow of current through it.
Current Overhead AC - (Measured in Ampere) - Current Overhead AC is defined as the current flowing through the overhead ac supply wire.

STEP 1: Convert Input(s) to Base Unit

Resistance Overhead AC: 0.0028 Ohm --> 0.0028 Ohm No Conversion Required
Current Overhead AC: 6.9 Ampere --> 6.9 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_loss = 2*R*(I)^2 --> 2*0.0028*(6.9)^2

Evaluating ... ...

P_loss = 0.266616

STEP 3: Convert Result to Output's Unit

0.266616 Watt --> No Conversion Required

FINAL ANSWER

0.266616 Watt <-- Line Losses

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead AC Supply » 1 2 Wire System » Wire Parameters » Line Losses using Load Current (Single-Phase Two-Wire OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Wire Parameters Calculators

Area of X-Section(Single-Phase Two-Wire OS)

LaTeX Go Area of Overhead AC Wire = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(((cos(Phase Difference))^2)*Line Losses*(Voltage Overhead AC^2))

Constant(Single-Phase Two-Wire OS)

LaTeX Go Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))

Volume of Conductor Material(Single-Phase Two-Wire OS)

LaTeX Go Volume of Conductor = 2*Area of Overhead AC Wire*Length of Overhead AC Wire

Line Losses(Single-Phase Two-Wire OS)

LaTeX Go Line Losses = (2)*((Current Overhead AC)^2)*Resistance Overhead AC

Line Losses using Load Current (Single-Phase Two-Wire OS) Formula

LaTeX Go

Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2
P_loss = 2*R*(I)^2

What is the value of maximum voltage and volume of conductor material in 1-phase 2-wire system?

The volume of conductor material required in this system is 2/cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is v_m so that r.m.s. value of voltage between them is v_m/√2.

How to Calculate Line Losses using Load Current (Single-Phase Two-Wire OS)?

Line Losses using Load Current (Single-Phase Two-Wire OS) calculator uses Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2 to calculate the Line Losses, The Line Losses using Load Current (single-Phase two-Wire OS) formula is defined as the loss of electric energy due to the heating of line wires by the current. Line Losses is denoted by P_loss symbol.

How to calculate Line Losses using Load Current (Single-Phase Two-Wire OS) using this online calculator? To use this online calculator for Line Losses using Load Current (Single-Phase Two-Wire OS), enter Resistance Overhead AC (R) & Current Overhead AC (I) and hit the calculate button. Here is how the Line Losses using Load Current (Single-Phase Two-Wire OS) calculation can be explained with given input values -> 0.266616 = 2*0.0028*(6.9)^2.

FAQ

What is Line Losses using Load Current (Single-Phase Two-Wire OS)?

The Line Losses using Load Current (single-Phase two-Wire OS) formula is defined as the loss of electric energy due to the heating of line wires by the current and is represented as P_loss = 2*R*(I)^2 or Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2. Resistance Overhead AC is defined as the property of the wire or line that opposes the flow of current through it & Current Overhead AC is defined as the current flowing through the overhead ac supply wire.

How to calculate Line Losses using Load Current (Single-Phase Two-Wire OS)?

The Line Losses using Load Current (single-Phase two-Wire OS) formula is defined as the loss of electric energy due to the heating of line wires by the current is calculated using Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2. To calculate Line Losses using Load Current (Single-Phase Two-Wire OS), you need Resistance Overhead AC (R) & Current Overhead AC (I). With our tool, you need to enter the respective value for Resistance Overhead AC & Current Overhead AC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Line Losses?

In this formula, Line Losses uses Resistance Overhead AC & Current Overhead AC. We can use 2 other way(s) to calculate the same, which is/are as follows -

Line Losses = (2)*((Current Overhead AC)^2)*Resistance Overhead AC
Line Losses = (4*Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*((cos(Phase Difference))^2))

Home

FREE PDFs

🔍 Search