Line Losses using Constant (1-Phase 2-Wire US) Calculator

✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity [ρ]			+10% -10%
✖Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.ⓘ Power Transmitted [P]			+10% -10%
✖Length of Underground AC Wire is the total length of the wire from one end to other end.ⓘ Length of Underground AC Wire [L]			+10% -10%
✖Constant Underground AC is defined as the constant of line of a Overhead supply system.ⓘ Constant Underground AC [K]			+10% -10%
✖Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.ⓘ Maximum Voltage Underground AC [V_m]			+10% -10%

✖Line Losses is defined as the total losses occurring in an Underground AC line when in use.ⓘ Line Losses using Constant (1-Phase 2-Wire US) [P_loss]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Line Losses using Constant (1-Phase 2-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Line Losses = 4*Resistivity*(Power Transmitted*Length of Underground AC Wire)^2/(Constant Underground AC*(Maximum Voltage Underground AC)^2)
P_loss = 4*ρ*(P*L)^2/(K*(V_m)^2)
This formula uses 6 Variables

Variables Used

Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Underground AC line when in use.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Power Transmitted - (Measured in Watt) - Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.
Length of Underground AC Wire - (Measured in Meter) - Length of Underground AC Wire is the total length of the wire from one end to other end.
Constant Underground AC - Constant Underground AC is defined as the constant of line of a Overhead supply system.
Maximum Voltage Underground AC - (Measured in Volt) - Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.

STEP 1: Convert Input(s) to Base Unit

Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Power Transmitted: 300 Watt --> 300 Watt No Conversion Required
Length of Underground AC Wire: 24 Meter --> 24 Meter No Conversion Required
Constant Underground AC: 0.87 --> No Conversion Required
Maximum Voltage Underground AC: 230 Volt --> 230 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_loss = 4*ρ*(P*L)^2/(K*(V_m)^2) --> 4*1.7E-05*(300*24)^2/(0.87*(230)^2)

Evaluating ... ...

P_loss = 0.0765947461052083

STEP 3: Convert Result to Output's Unit

0.0765947461052083 Watt --> No Conversion Required

FINAL ANSWER

0.0765947461052083 ≈ 0.076595 Watt <-- Line Losses

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground AC Supply » 1 Φ 2 Wire System » Line Parameters » Line Losses using Constant (1-Phase 2-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Line Parameters Calculators

Line Losses using Area of X-Section (1-Phase 2-Wire US)

LaTeX Go Line Losses = (4*Length of Underground AC Wire*Resistivity*(Power Transmitted^2))/(Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*((cos(Phase Difference))^2))

Line Losses using Volume of Conductor Material (1-Phase 2-Wire US)

LaTeX Go Line Losses = 8*(Power Transmitted)^2*Resistivity*(Length of Underground AC Wire)^2/((Maximum Voltage Underground AC*cos(Phase Difference))^2*Volume Of Conductor)

Line Losses using Load Current (1-Phase 2-Wire US)

LaTeX Go Line Losses = 2*Resistance Underground AC*(Current Underground AC)^2

Line Losses (1-Phase 2-Wire US)

LaTeX Go Line Losses = 2*(Current Underground AC^2)*Resistance Underground AC

Line Losses using Constant (1-Phase 2-Wire US) Formula

LaTeX Go

Line Losses = 4*Resistivity*(Power Transmitted*Length of Underground AC Wire)^2/(Constant Underground AC*(Maximum Voltage Underground AC)^2)
P_loss = 4*ρ*(P*L)^2/(K*(V_m)^2)

What is the value of maximum voltage and volume of conductor material in 1-phase 2-wire system?

The volume of conductor material required in this system is 2/cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is v_m so that r.m.s. value of voltage between them is v_m/√2.

How to Calculate Line Losses using Constant (1-Phase 2-Wire US)?

Line Losses using Constant (1-Phase 2-Wire US) calculator uses Line Losses = 4*Resistivity*(Power Transmitted*Length of Underground AC Wire)^2/(Constant Underground AC*(Maximum Voltage Underground AC)^2) to calculate the Line Losses, The Line Losses using Constant (1-Phase 2-Wire US) formula is defined as the loss of electric energy due to the heating of line wires by the current. Line Losses is denoted by P_loss symbol.

How to calculate Line Losses using Constant (1-Phase 2-Wire US) using this online calculator? To use this online calculator for Line Losses using Constant (1-Phase 2-Wire US), enter Resistivity (ρ), Power Transmitted (P), Length of Underground AC Wire (L), Constant Underground AC (K) & Maximum Voltage Underground AC (V_m) and hit the calculate button. Here is how the Line Losses using Constant (1-Phase 2-Wire US) calculation can be explained with given input values -> 0.076595 = 4*1.7E-05*(300*24)^2/(0.87*(230)^2).

FAQ

What is Line Losses using Constant (1-Phase 2-Wire US)?

The Line Losses using Constant (1-Phase 2-Wire US) formula is defined as the loss of electric energy due to the heating of line wires by the current and is represented as P_loss = 4*ρ*(P*L)^2/(K*(V_m)^2) or Line Losses = 4*Resistivity*(Power Transmitted*Length of Underground AC Wire)^2/(Constant Underground AC*(Maximum Voltage Underground AC)^2). Resistivity is the measure of how strongly a material opposes the flow of current through them, Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work, Length of Underground AC Wire is the total length of the wire from one end to other end, Constant Underground AC is defined as the constant of line of a Overhead supply system & Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.

How to calculate Line Losses using Constant (1-Phase 2-Wire US)?

The Line Losses using Constant (1-Phase 2-Wire US) formula is defined as the loss of electric energy due to the heating of line wires by the current is calculated using Line Losses = 4*Resistivity*(Power Transmitted*Length of Underground AC Wire)^2/(Constant Underground AC*(Maximum Voltage Underground AC)^2). To calculate Line Losses using Constant (1-Phase 2-Wire US), you need Resistivity (ρ), Power Transmitted (P), Length of Underground AC Wire (L), Constant Underground AC (K) & Maximum Voltage Underground AC (V_m). With our tool, you need to enter the respective value for Resistivity, Power Transmitted, Length of Underground AC Wire, Constant Underground AC & Maximum Voltage Underground AC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Line Losses?

In this formula, Line Losses uses Resistivity, Power Transmitted, Length of Underground AC Wire, Constant Underground AC & Maximum Voltage Underground AC. We can use 3 other way(s) to calculate the same, which is/are as follows -

Line Losses = 2*(Current Underground AC^2)*Resistance Underground AC
Line Losses = (4*Length of Underground AC Wire*Resistivity*(Power Transmitted^2))/(Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*((cos(Phase Difference))^2))
Line Losses = 8*(Power Transmitted)^2*Resistivity*(Length of Underground AC Wire)^2/((Maximum Voltage Underground AC*cos(Phase Difference))^2*Volume Of Conductor)

Home

FREE PDFs

🔍 Search