Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal Calculator

✖Ratio of Length of Link to Length of Arm is equal to the ratio of tan of their inclination angle.ⓘ Ratio of Length of Link to Length of Arm [q]			+10% -10%
✖Height of Governor is the measurement from the bottom to the top of the governor.ⓘ Height of Governor [h]			+10% -10%
✖Percentage Increase in Speed is the net value by which speed increases.ⓘ Percentage Increase in Speed [δ_c]			+10% -10%

✖The lift of sleeve is the vertical distance which the sleeve travels due to a change in equilibrium speed.ⓘ Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal [x_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Theory of Machine Formula PDF PDF Image

Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal Solution

STEP 0: Pre-Calculation Summary

Formula Used

Lift of Sleeve = (1+Ratio of Length of Link to Length of Arm)*(2*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed)
x_s = (1+q)*(2*h*δ_c)/(1+2*δ_c)
This formula uses 4 Variables

Variables Used

Lift of Sleeve - (Measured in Meter) - The lift of sleeve is the vertical distance which the sleeve travels due to a change in equilibrium speed.
Ratio of Length of Link to Length of Arm - Ratio of Length of Link to Length of Arm is equal to the ratio of tan of their inclination angle.
Height of Governor - (Measured in Meter) - Height of Governor is the measurement from the bottom to the top of the governor.
Percentage Increase in Speed - Percentage Increase in Speed is the net value by which speed increases.

STEP 1: Convert Input(s) to Base Unit

Ratio of Length of Link to Length of Arm: 0.9 --> No Conversion Required
Height of Governor: 0.337891 Meter --> 0.337891 Meter No Conversion Required
Percentage Increase in Speed: 60 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

x_s = (1+q)*(2*h*δ_c)/(1+2*δ_c) --> (1+0.9)*(2*0.337891*60)/(1+2*60)

Evaluating ... ...

x_s = 0.636687173553719

STEP 3: Convert Result to Output's Unit

0.636687173553719 Meter --> No Conversion Required

FINAL ANSWER

0.636687173553719 ≈ 0.636687 Meter <-- Lift of Sleeve

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Governors » Porter Governor » Mechanical » Dimensions and Power » Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Dimensions and Power Calculators

Power of Porter Governor if Angle Made by Upper and Lower Arms are Not Equal

LaTeX Go Power = (Mass of Ball+Mass of Central Load/2*(1+Ratio of Length of Link to Length of Arm))*(4*Percentage Increase in Speed^2*Acceleration Due to Gravity*Height of Governor)/(1+2*Percentage Increase in Speed)

Power of Porter Governor if Angle Made by Upper and Lower Arms are Equal

LaTeX Go Power = (4*Percentage Increase in Speed^2*(Mass of Ball+Mass of Central Load)*Acceleration Due to Gravity*Height of Governor)/(1+2*Percentage Increase in Speed)

Controlling Force for Porter Governor given Radius of Rotation of Mid Position

LaTeX Go Force = Mass of Ball*((2*pi*Mean Equilibrium Speed in RPM)/60)^2*Radius of Rotation if Governor is in Mid Position

Controlling Force for Porter Governor

LaTeX Go Force = Mass of Ball*Mean Equilibrium Angular Speed^2*Radius of Rotation if Governor is in Mid Position

Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal Formula

LaTeX Go

Lift of Sleeve = (1+Ratio of Length of Link to Length of Arm)*(2*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed)
x_s = (1+q)*(2*h*δ_c)/(1+2*δ_c)

What is governor in theory of machine?

Governor, in technology, a device that automatically maintains the rotary speed of an engine or other prime mover within reasonably close limits regardless of the load. A typical governor regulates an engine's speed by varying the rate at which fuel is furnished to it.

How to Calculate Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal?

Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal calculator uses Lift of Sleeve = (1+Ratio of Length of Link to Length of Arm)*(2*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed) to calculate the Lift of Sleeve, Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal formula is defined as a measure of the vertical movement of the sleeve in a Porter Governor, a type of centrifugal governor, which plays a crucial role in regulating the speed of an engine. Lift of Sleeve is denoted by x_s symbol.

How to calculate Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal using this online calculator? To use this online calculator for Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal, enter Ratio of Length of Link to Length of Arm (q), Height of Governor (h) & Percentage Increase in Speed (δ_c) and hit the calculate button. Here is how the Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal calculation can be explained with given input values -> 5.652893 = (1+0.9)*(2*0.337891*60)/(1+2*60).

FAQ

What is Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal?

Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal formula is defined as a measure of the vertical movement of the sleeve in a Porter Governor, a type of centrifugal governor, which plays a crucial role in regulating the speed of an engine and is represented as x_s = (1+q)*(2*h*δ_c)/(1+2*δ_c) or Lift of Sleeve = (1+Ratio of Length of Link to Length of Arm)*(2*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed). Ratio of Length of Link to Length of Arm is equal to the ratio of tan of their inclination angle, Height of Governor is the measurement from the bottom to the top of the governor & Percentage Increase in Speed is the net value by which speed increases.

How to calculate Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal?

Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal formula is defined as a measure of the vertical movement of the sleeve in a Porter Governor, a type of centrifugal governor, which plays a crucial role in regulating the speed of an engine is calculated using Lift of Sleeve = (1+Ratio of Length of Link to Length of Arm)*(2*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed). To calculate Lift of Sleeve for Porter Governor if Angle Made by Upper and Lower Arms are Not Equal, you need Ratio of Length of Link to Length of Arm (q), Height of Governor (h) & Percentage Increase in Speed (δ_c). With our tool, you need to enter the respective value for Ratio of Length of Link to Length of Arm, Height of Governor & Percentage Increase in Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Lift of Sleeve?

In this formula, Lift of Sleeve uses Ratio of Length of Link to Length of Arm, Height of Governor & Percentage Increase in Speed. We can use 1 other way(s) to calculate the same, which is/are as follows -

Lift of Sleeve = (4*Height of Governor*Percentage Increase in Speed)/(1+2*Percentage Increase in Speed)

Home

FREE PDFs

🔍 Search