Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor Calculator

✖Radius of Rotation if Governor is in Mid-Position is the linear distance from its axis of rotation to a point of interest on the body.ⓘ Radius of Rotation if Governor is in Mid-Position [r]			+10% -10%
✖Minimum radius of rotation is the linear distance from its axis of rotation to a point of interest on the body.ⓘ Minimum Radius of Rotation [r₁]			+10% -10%
✖Length of sleeve arm of lever is a measure of how long the sleeve arm is.ⓘ Length of Sleeve Arm of Lever [y]			+10% -10%
✖Length of ball arm of lever is a measure of how long the ball arm is.ⓘ Length of Ball Arm of Lever [x_ba]			+10% -10%

✖Lift of sleeve for minimum position is the vertical distance which the sleeve travels due to a change in equilibrium speed.ⓘ Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor [h₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Theory of Machine Formula PDF PDF Image

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever
h₁ = (r-r₁)*y/x_ba
This formula uses 5 Variables

Variables Used

Lift of Sleeve for Minimum Position - (Measured in Meter) - Lift of sleeve for minimum position is the vertical distance which the sleeve travels due to a change in equilibrium speed.
Radius of Rotation if Governor is in Mid-Position - (Measured in Meter) - Radius of Rotation if Governor is in Mid-Position is the linear distance from its axis of rotation to a point of interest on the body.
Minimum Radius of Rotation - (Measured in Meter) - Minimum radius of rotation is the linear distance from its axis of rotation to a point of interest on the body.
Length of Sleeve Arm of Lever - (Measured in Meter) - Length of sleeve arm of lever is a measure of how long the sleeve arm is.
Length of Ball Arm of Lever - (Measured in Meter) - Length of ball arm of lever is a measure of how long the ball arm is.

STEP 1: Convert Input(s) to Base Unit

Radius of Rotation if Governor is in Mid-Position: 19 Meter --> 19 Meter No Conversion Required
Minimum Radius of Rotation: 2.2 Meter --> 2.2 Meter No Conversion Required
Length of Sleeve Arm of Lever: 1.2 Meter --> 1.2 Meter No Conversion Required
Length of Ball Arm of Lever: 0.6 Meter --> 0.6 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h₁ = (r-r₁)*y/x_ba --> (19-2.2)*1.2/0.6

Evaluating ... ...

h₁ = 33.6

STEP 3: Convert Result to Output's Unit

33.6 Meter --> No Conversion Required

FINAL ANSWER

33.6 Meter <-- Lift of Sleeve for Minimum Position

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Theory of Machine » Governors » Mechanical » Lift of the Sleeve » Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Lift of the Sleeve Calculators

Lift of Sleeve at Maximum Radius of Rotation for Hartnell Governor

LaTeX Go Lift of Sleeve for Maximum Position = (Maximum Radius of Rotation-Radius of Rotation if Governor is in Mid-Position)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor

LaTeX Go Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever

Total Lift of Sleeve for Hartnell Governor

LaTeX Go Total lift of sleeve = (Lift of Sleeve for Maximum Position-Lift of Sleeve for Minimum Position)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever

Lift of Sleeve Corresponding to Deflection

LaTeX Go Lift of Sleeve Corresponding to Deflection = (2.4*Deflection of Center of Leaf Spring^2)/Distance between Fixed Ends of Spring

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor Formula

LaTeX Go

Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever
h₁ = (r-r₁)*y/x_ba

What is sensitiveness of governor?

The sensitiveness is applied when the governor is considered as an independent mechanism but in the case when it is fitted to an engine, Then the sensitiveness of the governor is defined as the ratio of the difference between the maximum and minimum equilibrium speed to the mean equilibrium speed.

How to Calculate Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor?

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor calculator uses Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever to calculate the Lift of Sleeve for Minimum Position, Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor formula is defined as the vertical movement of the sleeve at the point where the radius of rotation is minimum, which plays a crucial role in the functioning of the Hartnell governor, a mechanical device used to regulate the speed of an engine. Lift of Sleeve for Minimum Position is denoted by h₁ symbol.

How to calculate Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor using this online calculator? To use this online calculator for Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor, enter Radius of Rotation if Governor is in Mid-Position (r), Minimum Radius of Rotation (r₁), Length of Sleeve Arm of Lever (y) & Length of Ball Arm of Lever (x_ba) and hit the calculate button. Here is how the Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor calculation can be explained with given input values -> 33.6 = (19-2.2)*1.2/0.6.

FAQ

What is Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor?

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor formula is defined as the vertical movement of the sleeve at the point where the radius of rotation is minimum, which plays a crucial role in the functioning of the Hartnell governor, a mechanical device used to regulate the speed of an engine and is represented as h₁ = (r-r₁)*y/x_ba or Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever. Radius of Rotation if Governor is in Mid-Position is the linear distance from its axis of rotation to a point of interest on the body, Minimum radius of rotation is the linear distance from its axis of rotation to a point of interest on the body, Length of sleeve arm of lever is a measure of how long the sleeve arm is & Length of ball arm of lever is a measure of how long the ball arm is.

How to calculate Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor?

Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor formula is defined as the vertical movement of the sleeve at the point where the radius of rotation is minimum, which plays a crucial role in the functioning of the Hartnell governor, a mechanical device used to regulate the speed of an engine is calculated using Lift of Sleeve for Minimum Position = (Radius of Rotation if Governor is in Mid-Position-Minimum Radius of Rotation)*Length of Sleeve Arm of Lever/Length of Ball Arm of Lever. To calculate Lift of Sleeve at Minimum Radius of Rotation for Hartnell Governor, you need Radius of Rotation if Governor is in Mid-Position (r), Minimum Radius of Rotation (r₁), Length of Sleeve Arm of Lever (y) & Length of Ball Arm of Lever (x_ba). With our tool, you need to enter the respective value for Radius of Rotation if Governor is in Mid-Position, Minimum Radius of Rotation, Length of Sleeve Arm of Lever & Length of Ball Arm of Lever and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search