Length of Weld given Area of Parallel Fillet Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖The Length of Weld is the linear distance of each weld segment.ⓘ Length of Weld given Area of Parallel Fillet Weld [l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Length of Weld given Area of Parallel Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)
l = A_{weld bed}/(1.414*t_plate)
This formula uses 3 Variables

Variables Used

Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = A_{weld bed}/(1.414*t_plate) --> 0.0009/(1.414*0.012)

Evaluating ... ...

l = 0.053041018387553

STEP 3: Convert Result to Output's Unit

0.053041018387553 Meter -->53.041018387553 Millimeter (Check conversion here)

FINAL ANSWER

53.041018387553 ≈ 53.04102 Millimeter <-- Length of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Length of Weld » Length of Weld given Area of Parallel Fillet Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Length of Weld Calculators

Length of Weld given Area of Fillet Weld for Double Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)

Length of Weld given Area of Fillet Weld for Single Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(0.707*Thickness of Plate)

Length of Weld given Area of Fillet Weld and Throat Thickness for Double Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(2*Throat Thickness)

Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/Throat Thickness

Length of Weld given Area of Parallel Fillet Weld Formula

LaTeX Go

Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)
l = A_{weld bed}/(1.414*t_plate)

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Length of Weld given Area of Parallel Fillet Weld?

Length of Weld given Area of Parallel Fillet Weld calculator uses Length of Weld = Weld Bed Area/(1.414*Thickness of Plate) to calculate the Length of Weld, The Length of weld given area of parallel fillet weld formula is defined as the linear distance of each weld segment. Length of Weld is denoted by l symbol.

How to calculate Length of Weld given Area of Parallel Fillet Weld using this online calculator? To use this online calculator for Length of Weld given Area of Parallel Fillet Weld, enter Weld Bed Area (A_{weld bed}) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Length of Weld given Area of Parallel Fillet Weld calculation can be explained with given input values -> 53041.02 = 0.0009/(1.414*0.012).

FAQ

What is Length of Weld given Area of Parallel Fillet Weld?

The Length of weld given area of parallel fillet weld formula is defined as the linear distance of each weld segment and is represented as l = A_{weld bed}/(1.414*t_plate) or Length of Weld = Weld Bed Area/(1.414*Thickness of Plate). Weld Bed Area is that area which is prepared by joining two metals for welding & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Length of Weld given Area of Parallel Fillet Weld?

The Length of weld given area of parallel fillet weld formula is defined as the linear distance of each weld segment is calculated using Length of Weld = Weld Bed Area/(1.414*Thickness of Plate). To calculate Length of Weld given Area of Parallel Fillet Weld, you need Weld Bed Area (A_{weld bed}) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Weld Bed Area & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Weld?

In this formula, Length of Weld uses Weld Bed Area & Thickness of Plate. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length of Weld = Weld Bed Area/(2*Throat Thickness)
Length of Weld = Weld Bed Area/Throat Thickness
Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)

Home

FREE PDFs

🔍 Search