Length of Weld given Area of Parallel Fillet Weld and Throat Thickness Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness [t_throat]			+10% -10%

✖The Length of Weld is the linear distance of each weld segment.ⓘ Length of Weld given Area of Parallel Fillet Weld and Throat Thickness [l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Length of Weld given Area of Parallel Fillet Weld and Throat Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Weld = Weld Bed Area/(2*Throat Thickness)
l = A_{weld bed}/(2*t_throat)
This formula uses 3 Variables

Variables Used

Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Throat Thickness: 50 Millimeter --> 0.05 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = A_{weld bed}/(2*t_throat) --> 0.0009/(2*0.05)

Evaluating ... ...

l = 0.009

STEP 3: Convert Result to Output's Unit

0.009 Meter -->9 Millimeter (Check conversion here)

FINAL ANSWER

9 Millimeter <-- Length of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Length of Weld » Length of Weld given Area of Parallel Fillet Weld and Throat Thickness

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Length of Weld Calculators

Length of Weld given Area of Fillet Weld for Double Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)

Length of Weld given Area of Fillet Weld for Single Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(0.707*Thickness of Plate)

Length of Weld given Area of Fillet Weld and Throat Thickness for Double Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/(2*Throat Thickness)

Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint

LaTeX Go Length of Weld = Weld Bed Area/Throat Thickness

Length of Weld given Area of Parallel Fillet Weld and Throat Thickness Formula

LaTeX Go

Length of Weld = Weld Bed Area/(2*Throat Thickness)
l = A_{weld bed}/(2*t_throat)

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Length of Weld given Area of Parallel Fillet Weld and Throat Thickness?

Length of Weld given Area of Parallel Fillet Weld and Throat Thickness calculator uses Length of Weld = Weld Bed Area/(2*Throat Thickness) to calculate the Length of Weld, Length of weld given area of parallel fillet weld and throat thickness is defined as the linear distance of each weld segment. Length of Weld is denoted by l symbol.

How to calculate Length of Weld given Area of Parallel Fillet Weld and Throat Thickness using this online calculator? To use this online calculator for Length of Weld given Area of Parallel Fillet Weld and Throat Thickness, enter Weld Bed Area (A_{weld bed}) & Throat Thickness (t_throat) and hit the calculate button. Here is how the Length of Weld given Area of Parallel Fillet Weld and Throat Thickness calculation can be explained with given input values -> 9000 = 0.0009/(2*0.05).

FAQ

What is Length of Weld given Area of Parallel Fillet Weld and Throat Thickness?

Length of weld given area of parallel fillet weld and throat thickness is defined as the linear distance of each weld segment and is represented as l = A_{weld bed}/(2*t_throat) or Length of Weld = Weld Bed Area/(2*Throat Thickness). Weld Bed Area is that area which is prepared by joining two metals for welding & The Throat Thickness is the shortest distance from the root to the face of the weld.

How to calculate Length of Weld given Area of Parallel Fillet Weld and Throat Thickness?

Length of weld given area of parallel fillet weld and throat thickness is defined as the linear distance of each weld segment is calculated using Length of Weld = Weld Bed Area/(2*Throat Thickness). To calculate Length of Weld given Area of Parallel Fillet Weld and Throat Thickness, you need Weld Bed Area (A_{weld bed}) & Throat Thickness (t_throat). With our tool, you need to enter the respective value for Weld Bed Area & Throat Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Weld?

In this formula, Length of Weld uses Weld Bed Area & Throat Thickness. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length of Weld = Weld Bed Area/(2*Throat Thickness)
Length of Weld = Weld Bed Area/Throat Thickness
Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)

Home

FREE PDFs

🔍 Search