Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Weld = Weld Bed Area/Throat Thickness
l = Aweld bed/tthroat
This formula uses 3 Variables
Variables Used
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.
STEP 1: Convert Input(s) to Base Unit
Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion ​here)
Throat Thickness: 50 Millimeter --> 0.05 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
l = Aweld bed/tthroat --> 0.0009/0.05
Evaluating ... ...
l = 0.018
STEP 3: Convert Result to Output's Unit
0.018 Meter -->18 Millimeter (Check conversion ​here)
FINAL ANSWER
18 Millimeter <-- Length of Weld
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Length of Weld Calculators

Length of Weld given Area of Fillet Weld for Double Fillet Lap Joint
​ LaTeX ​ Go Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)
Length of Weld given Area of Fillet Weld for Single Fillet Lap Joint
​ LaTeX ​ Go Length of Weld = Weld Bed Area/(0.707*Thickness of Plate)
Length of Weld given Area of Fillet Weld and Throat Thickness for Double Fillet Lap Joint
​ LaTeX ​ Go Length of Weld = Weld Bed Area/(2*Throat Thickness)
Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint
​ LaTeX ​ Go Length of Weld = Weld Bed Area/Throat Thickness

Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint Formula

​LaTeX ​Go
Length of Weld = Weld Bed Area/Throat Thickness
l = Aweld bed/tthroat

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint?

Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint calculator uses Length of Weld = Weld Bed Area/Throat Thickness to calculate the Length of Weld, Length of weld given area of fillet weld and throat thickness for single fillet lap joint is defined as the linear distance of each weld segment. Length of Weld is denoted by l symbol.

How to calculate Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint using this online calculator? To use this online calculator for Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint, enter Weld Bed Area (Aweld bed) & Throat Thickness (tthroat) and hit the calculate button. Here is how the Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint calculation can be explained with given input values -> 18000 = 0.0009/0.05.

FAQ

What is Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint?
Length of weld given area of fillet weld and throat thickness for single fillet lap joint is defined as the linear distance of each weld segment and is represented as l = Aweld bed/tthroat or Length of Weld = Weld Bed Area/Throat Thickness. Weld Bed Area is that area which is prepared by joining two metals for welding & The Throat Thickness is the shortest distance from the root to the face of the weld.
How to calculate Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint?
Length of weld given area of fillet weld and throat thickness for single fillet lap joint is defined as the linear distance of each weld segment is calculated using Length of Weld = Weld Bed Area/Throat Thickness. To calculate Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint, you need Weld Bed Area (Aweld bed) & Throat Thickness (tthroat). With our tool, you need to enter the respective value for Weld Bed Area & Throat Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Length of Weld?
In this formula, Length of Weld uses Weld Bed Area & Throat Thickness. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Length of Weld = Weld Bed Area/(2*Throat Thickness)
  • Length of Weld = Weld Bed Area/(1.414*Thickness of Plate)
  • Length of Weld = Weld Bed Area/(0.707*Thickness of Plate)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!