Length of Valley Curve Less than Stopping Sight Distance Calculator

✖Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.ⓘ Sight Distance [S]			+10% -10%
✖Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.ⓘ Driver Sight Height [h₁]			+10% -10%
✖Inclination refers to the angle or slope of an object or surface concerning the horizontal plane.ⓘ Inclination [α_angle]			+10% -10%
✖Deviation Angle is the angle between the reference direction and the observed direction.ⓘ Deviation Angle [N]			+10% -10%

✖Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.ⓘ Length of Valley Curve Less than Stopping Sight Distance [L_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Length of Valley Curve Formulas PDF PDF Image

Length of Valley Curve Less than Stopping Sight Distance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle)
L_s = 2*S-(2*h₁+(2*S*tan(α_angle)))/(N)
This formula uses 1 Functions, 5 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)

Variables Used

Length of Curve - (Measured in Meter) - Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.
Sight Distance - (Measured in Meter) - Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.
Driver Sight Height - (Measured in Meter) - Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.
Inclination - (Measured in Radian) - Inclination refers to the angle or slope of an object or surface concerning the horizontal plane.
Deviation Angle - (Measured in Radian) - Deviation Angle is the angle between the reference direction and the observed direction.

STEP 1: Convert Input(s) to Base Unit

Sight Distance: 3.56 Meter --> 3.56 Meter No Conversion Required
Driver Sight Height: 0.75 Meter --> 0.75 Meter No Conversion Required
Inclination: 2 Degree --> 0.03490658503988 Radian (Check conversion here)
Deviation Angle: 0.88 Radian --> 0.88 Radian No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_s = 2*S-(2*h₁+(2*S*tan(α_angle)))/(N) --> 2*3.56-(2*0.75+(2*3.56*tan(0.03490658503988)))/(0.88)

Evaluating ... ...

L_s = 5.13291377411228

STEP 3: Convert Result to Output's Unit

5.13291377411228 Meter --> No Conversion Required

FINAL ANSWER

5.13291377411228 ≈ 5.132914 Meter <-- Length of Curve

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Transportation System » Vertical alignment » Length of Valley Curve » Mechanical » Length of Valley Curve Less than Stopping Sight Distance » Length of Valley Curve Less than Stopping Sight Distance

Credits

Created by Rahul

Dayanada Sagar college of Engineering (DSCE), banglore

Rahul has created this Calculator and 50+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Length of Valley Curve Less than Stopping Sight Distance Calculators

Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Deviation Angle = (2*Sight Distance)-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Length of Curve)

Inclination Angle given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Inclination = atan(((Length of Curve-2*Sight Distance)*Deviation Angle+2*Driver Sight Height)/(2*Sight Distance))

Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle)

Driver Sight Height given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Driver Sight Height = ((Length of Curve-2*Sight Distance)*Deviation Angle+2*Sight Distance*tan(Inclination))/2

Length of Valley Curve Less than Stopping Sight Distance Formula

LaTeX Go

Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle)
L_s = 2*S-(2*h₁+(2*S*tan(α_angle)))/(N)

Length of Valley Curve Less than Stopping Sight Distance

The "Length of Valley Curve Less than Stopping Sight Distance" refers to the segment of a road that forms a downward slope or depression (valley) and is shorter than the stopping sight distance required for safe driving. This length indicates a section where the road curvature is such that a driver can see the road ahead within a distance that is less than the stopping sight distance, potentially posing a visibility challenge and requiring caution.

How to Calculate Length of Valley Curve Less than Stopping Sight Distance?

Length of Valley Curve Less than Stopping Sight Distance calculator uses Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle) to calculate the Length of Curve, The Length of Valley Curve Less than Stopping Sight Distance formula is defined as Twice the sight distance minus twice the driver's eye height plus twice the sight distance multiplied by the tangent of the inclination, all divided by the deviation angle. Length of Curve is denoted by L_s symbol.

How to calculate Length of Valley Curve Less than Stopping Sight Distance using this online calculator? To use this online calculator for Length of Valley Curve Less than Stopping Sight Distance, enter Sight Distance (S), Driver Sight Height (h₁), Inclination (α_angle) & Deviation Angle (N) and hit the calculate button. Here is how the Length of Valley Curve Less than Stopping Sight Distance calculation can be explained with given input values -> 5.132914 = 2*3.56-(2*0.75+(2*3.56*tan(0.03490658503988)))/(0.88).

FAQ

What is Length of Valley Curve Less than Stopping Sight Distance?

The Length of Valley Curve Less than Stopping Sight Distance formula is defined as Twice the sight distance minus twice the driver's eye height plus twice the sight distance multiplied by the tangent of the inclination, all divided by the deviation angle and is represented as L_s = 2*S-(2*h₁+(2*S*tan(α_angle)))/(N) or Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle). Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road, Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle, Inclination refers to the angle or slope of an object or surface concerning the horizontal plane & Deviation Angle is the angle between the reference direction and the observed direction.

How to calculate Length of Valley Curve Less than Stopping Sight Distance?

The Length of Valley Curve Less than Stopping Sight Distance formula is defined as Twice the sight distance minus twice the driver's eye height plus twice the sight distance multiplied by the tangent of the inclination, all divided by the deviation angle is calculated using Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle). To calculate Length of Valley Curve Less than Stopping Sight Distance, you need Sight Distance (S), Driver Sight Height (h₁), Inclination (α_angle) & Deviation Angle (N). With our tool, you need to enter the respective value for Sight Distance, Driver Sight Height, Inclination & Deviation Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search