Length of Roller Pin of Forked End of Rocker Arm given its Diameter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Roller Pin = 1.25*Diameter of Roller Pin
l2 = 1.25*d2
This formula uses 2 Variables
Variables Used
Length of Roller Pin - (Measured in Meter) - Length of Roller Pin is the total length of the pin used at the roller joint.
Diameter of Roller Pin - (Measured in Meter) - Diameter of Roller Pin is the diameter of the pin used at the roller joint.
STEP 1: Convert Input(s) to Base Unit
Diameter of Roller Pin: 20.6 Millimeter --> 0.0206 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
l2 = 1.25*d2 --> 1.25*0.0206
Evaluating ... ...
l2 = 0.02575
STEP 3: Convert Result to Output's Unit
0.02575 Meter -->25.75 Millimeter (Check conversion ​here)
FINAL ANSWER
25.75 Millimeter <-- Length of Roller Pin
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verifier Image
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

Design of Forked End Calculators

Length of Roller Pin of Forked End of Rocker Arm
​ LaTeX ​ Go Length of Roller Pin = 1.25*(Force on Roller Pin)/(Bearing Pressure for Roller Pin*Diameter of Roller Pin)
Bearing Pressure at Roller Pin of Forked End of Rocker Arm
​ LaTeX ​ Go Bearing Pressure for Roller Pin = (Force on Roller Pin)/(Diameter of Roller Pin*Length of Roller Pin)
Diameter of Roller Pin at Forked End of Rocker Arm
​ LaTeX ​ Go Diameter of Roller Pin = (Force on Roller Pin)/(Bearing Pressure for Roller Pin*Length of Roller Pin)
Force on Roller Pin of Forked End of Rocker Arm
​ LaTeX ​ Go Force on Roller Pin = Bearing Pressure for Roller Pin*Diameter of Roller Pin*Length of Roller Pin

Length of Roller Pin of Forked End of Rocker Arm given its Diameter Formula

​LaTeX ​Go
Length of Roller Pin = 1.25*Diameter of Roller Pin
l2 = 1.25*d2

Inlet and Exhaust Valve Rocker Arm

In four-stroke cycle engines, the rocker arm of the exhaust valve is more heavily loaded. On the other hand, the force required to operate the inlet valve is comparatively less. However, it is usual practice to make rocker arms for inlet and exhaust valves identical. This results in ease of manufacturing. The main objective of the rocker arm as a ‘lever’ is to change the direction of force and not the multiplication of the effort. Therefore, the two arms of the rocker arm are often made equal in moderate and low-speed engines. In high-speed engines, the (a/b) ratio is taken as (1/1.3), where a and b are the length of the arms, a being measured towards the exhaust valve.

How to Calculate Length of Roller Pin of Forked End of Rocker Arm given its Diameter?

Length of Roller Pin of Forked End of Rocker Arm given its Diameter calculator uses Length of Roller Pin = 1.25*Diameter of Roller Pin to calculate the Length of Roller Pin, The Length of roller pin of forked end of rocker arm given its diameter is the total length of the roller pin used at the roller joint of the rocker arm at its forked end. Length of Roller Pin is denoted by l2 symbol.

How to calculate Length of Roller Pin of Forked End of Rocker Arm given its Diameter using this online calculator? To use this online calculator for Length of Roller Pin of Forked End of Rocker Arm given its Diameter, enter Diameter of Roller Pin (d2) and hit the calculate button. Here is how the Length of Roller Pin of Forked End of Rocker Arm given its Diameter calculation can be explained with given input values -> 25750 = 1.25*0.0206.

FAQ

What is Length of Roller Pin of Forked End of Rocker Arm given its Diameter?
The Length of roller pin of forked end of rocker arm given its diameter is the total length of the roller pin used at the roller joint of the rocker arm at its forked end and is represented as l2 = 1.25*d2 or Length of Roller Pin = 1.25*Diameter of Roller Pin. Diameter of Roller Pin is the diameter of the pin used at the roller joint.
How to calculate Length of Roller Pin of Forked End of Rocker Arm given its Diameter?
The Length of roller pin of forked end of rocker arm given its diameter is the total length of the roller pin used at the roller joint of the rocker arm at its forked end is calculated using Length of Roller Pin = 1.25*Diameter of Roller Pin. To calculate Length of Roller Pin of Forked End of Rocker Arm given its Diameter, you need Diameter of Roller Pin (d2). With our tool, you need to enter the respective value for Diameter of Roller Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Length of Roller Pin?
In this formula, Length of Roller Pin uses Diameter of Roller Pin. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Length of Roller Pin = 1.25*(Force on Roller Pin)/(Bearing Pressure for Roller Pin*Diameter of Roller Pin)
  • Length of Roller Pin = 1.25*sqrt((2*Force on Roller Pin)/(pi*Shear Stress in Roller Pin))
  • Length of Roller Pin = (pi*Shear Stress in Roller Pin*Diameter of Roller Pin)/(2*Bearing Pressure for Roller Pin)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!