Length of Oloid given Surface to Volume Ratio Calculator

✖Surface to Volume Ratio of Oloid is a fraction of the surface area to volume of the Oloid.ⓘ Surface to Volume Ratio of Oloid [R_A/V]

+10%

-10%

✖The Length of Oloid is defined as the length of the Oloid from one end to the other.ⓘ Length of Oloid given Surface to Volume Ratio [l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download 3D Geometry Formula PDF PDF Image

Length of Oloid given Surface to Volume Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Oloid = 3*((4*pi)/(3.0524184684*Surface to Volume Ratio of Oloid))
l = 3*((4*pi)/(3.0524184684*R_A/V))
This formula uses 1 Constants, 2 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Length of Oloid - (Measured in Meter) - The Length of Oloid is defined as the length of the Oloid from one end to the other.
Surface to Volume Ratio of Oloid - (Measured in 1 per Meter) - Surface to Volume Ratio of Oloid is a fraction of the surface area to volume of the Oloid.

STEP 1: Convert Input(s) to Base Unit

Surface to Volume Ratio of Oloid: 2.5 1 per Meter --> 2.5 1 per Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = 3*((4*pi)/(3.0524184684*R_A/V)) --> 3*((4*pi)/(3.0524184684*2.5))

Evaluating ... ...

l = 4.94022850842446

STEP 3: Convert Result to Output's Unit

4.94022850842446 Meter --> No Conversion Required

FINAL ANSWER

4.94022850842446 ≈ 4.940229 Meter <-- Length of Oloid

(Calculation completed in 00.020 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Oloid » Length of Oloid » Length of Oloid given Surface to Volume Ratio

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Length of Oloid Calculators

Length of Oloid given Surface Area

LaTeX Go Length of Oloid = 3*(sqrt(Surface Area of Oloid/(4*pi)))

Length of Oloid given Edge Length

LaTeX Go Length of Oloid = 3*((3*Edge Length of Oloid)/(4*pi))

Length of Oloid given Height

LaTeX Go Length of Oloid = 3*(Height of Oloid/2)

Length of Oloid

LaTeX Go Length of Oloid = 3*Radius of Oloid

Length of Oloid given Surface to Volume Ratio Formula

LaTeX Go

Length of Oloid = 3*((4*pi)/(3.0524184684*Surface to Volume Ratio of Oloid))
l = 3*((4*pi)/(3.0524184684*R_A/V))

What is Oloid?

An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz in 1929. It is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies on the edge of the other circle. The distance between the circle centers equals the radius of the circles. One third of each circle's perimeter lies inside the convex hull, so the same shape may be also formed as the convex hull of the two remaining circular arcs each spanning an angle of 4π/3.

How to Calculate Length of Oloid given Surface to Volume Ratio?

Length of Oloid given Surface to Volume Ratio calculator uses Length of Oloid = 3*((4*pi)/(3.0524184684*Surface to Volume Ratio of Oloid)) to calculate the Length of Oloid, The Length of Oloid given Surface to Volume Ratio formula is defined as the length of the Oloid from one end to the other. The Oloid touches the plane in a line segment at each point during this rolling motion, and calculated using its surface to volume ratio. Length of Oloid is denoted by l symbol.

How to calculate Length of Oloid given Surface to Volume Ratio using this online calculator? To use this online calculator for Length of Oloid given Surface to Volume Ratio, enter Surface to Volume Ratio of Oloid (R_A/V) and hit the calculate button. Here is how the Length of Oloid given Surface to Volume Ratio calculation can be explained with given input values -> 4.940229 = 3*((4*pi)/(3.0524184684*2.5)).

FAQ

What is Length of Oloid given Surface to Volume Ratio?

The Length of Oloid given Surface to Volume Ratio formula is defined as the length of the Oloid from one end to the other. The Oloid touches the plane in a line segment at each point during this rolling motion, and calculated using its surface to volume ratio and is represented as l = 3*((4*pi)/(3.0524184684*R_A/V)) or Length of Oloid = 3*((4*pi)/(3.0524184684*Surface to Volume Ratio of Oloid)). Surface to Volume Ratio of Oloid is a fraction of the surface area to volume of the Oloid.

How to calculate Length of Oloid given Surface to Volume Ratio?

The Length of Oloid given Surface to Volume Ratio formula is defined as the length of the Oloid from one end to the other. The Oloid touches the plane in a line segment at each point during this rolling motion, and calculated using its surface to volume ratio is calculated using Length of Oloid = 3*((4*pi)/(3.0524184684*Surface to Volume Ratio of Oloid)). To calculate Length of Oloid given Surface to Volume Ratio, you need Surface to Volume Ratio of Oloid (R_A/V). With our tool, you need to enter the respective value for Surface to Volume Ratio of Oloid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Oloid?

In this formula, Length of Oloid uses Surface to Volume Ratio of Oloid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length of Oloid = 3*Radius of Oloid
Length of Oloid = 3*((3*Edge Length of Oloid)/(4*pi))
Length of Oloid = 3*(Height of Oloid/2)

Home

FREE PDFs

🔍 Search