Length of Kennedy Key given Compressive Stress in Key Calculator

✖The Transmitted Torque by Kennedy Key is the torque that a Kennedy key can effectively transmit between two connected machine components without slipping or failure.ⓘ Transmitted Torque by Kennedy Key [Mt_k]			+10% -10%
✖The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.ⓘ Diameter of Shaft using Key [d_s]			+10% -10%
✖The Width of Key is the measurement of the key's thickness, which ensures proper fit and function within a mechanical assembly, preventing slippage and ensuring torque transmission.ⓘ Width of Key [b_k]			+10% -10%
✖The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.ⓘ Compressive Stress in Key [σ_c]			+10% -10%

✖The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.ⓘ Length of Kennedy Key given Compressive Stress in Key [l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Keys Formulas PDF PDF Image

Length of Kennedy Key given Compressive Stress in Key Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Key = sqrt(2)*Transmitted Torque by Kennedy Key/(Diameter of Shaft using Key*Width of Key*Compressive Stress in Key)
l = sqrt(2)*Mt_k/(d_s*b_k*σ_c)
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Length of Key - (Measured in Meter) - The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.
Transmitted Torque by Kennedy Key - (Measured in Newton Meter) - The Transmitted Torque by Kennedy Key is the torque that a Kennedy key can effectively transmit between two connected machine components without slipping or failure.
Diameter of Shaft using Key - (Measured in Meter) - The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.
Width of Key - (Measured in Meter) - The Width of Key is the measurement of the key's thickness, which ensures proper fit and function within a mechanical assembly, preventing slippage and ensuring torque transmission.
Compressive Stress in Key - (Measured in Pascal) - The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.

STEP 1: Convert Input(s) to Base Unit

Transmitted Torque by Kennedy Key: 712763.6 Newton Millimeter --> 712.7636 Newton Meter (Check conversion here)
Diameter of Shaft using Key: 44.98998 Millimeter --> 0.04498998 Meter (Check conversion here)
Width of Key: 5 Millimeter --> 0.005 Meter (Check conversion here)
Compressive Stress in Key: 128 Newton per Square Millimeter --> 128000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = sqrt(2)*Mt_k/(d_s*b_k*σ_c) --> sqrt(2)*712.7636/(0.04498998*0.005*128000000)

Evaluating ... ...

l = 0.0350077933285739

STEP 3: Convert Result to Output's Unit

0.0350077933285739 Meter -->35.0077933285739 Millimeter (Check conversion here)

FINAL ANSWER

35.0077933285739 ≈ 35.00779 Millimeter <-- Length of Key

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Keys » Design of Kennedy Key » Length of Kennedy Key given Compressive Stress in Key

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Design of Kennedy Key Calculators

Diameter of Shaft given Shear Stress in Kennedy Key

LaTeX Go Diameter of Shaft using Key = Transmitted Torque by Kennedy Key/(sqrt(2)*Shear Stress in Key*Width of Key*Length of Key)

Length of Kennedy Key given Shear Stress in Key

LaTeX Go Length of Key = Transmitted Torque by Kennedy Key/(sqrt(2)*Diameter of Shaft using Key*Width of Key*Shear Stress in Key)

Shear Stress in Kennedy Key

LaTeX Go Shear Stress in Key = Transmitted Torque by Kennedy Key/(sqrt(2)*Diameter of Shaft using Key*Width of Key*Length of Key)

Torque Transmitted by Kennedy Key given Shear Stress in Key

LaTeX Go Transmitted Torque by Kennedy Key = Shear Stress in Key*sqrt(2)*Diameter of Shaft using Key*Width of Key*Length of Key

Length of Kennedy Key given Compressive Stress in Key Formula

LaTeX Go

Length of Key = sqrt(2)*Transmitted Torque by Kennedy Key/(Diameter of Shaft using Key*Width of Key*Compressive Stress in Key)
l = sqrt(2)*Mt_k/(d_s*b_k*σ_c)

Define Compressive Stress

Compressive Stress is defined as the stress that results from the shortening in one dimension of an elastic body due to oppositely directed collinear forces tending to crush it.

How to Calculate Length of Kennedy Key given Compressive Stress in Key?

Length of Kennedy Key given Compressive Stress in Key calculator uses Length of Key = sqrt(2)*Transmitted Torque by Kennedy Key/(Diameter of Shaft using Key*Width of Key*Compressive Stress in Key) to calculate the Length of Key, Length of Kennedy Key given Compressive Stress in Key formula is defined as a method to determine the appropriate dimensions of a Kennedy key based on the compressive stress it experiences. This ensures the key can effectively transmit torque without failing under load. Length of Key is denoted by l symbol.

How to calculate Length of Kennedy Key given Compressive Stress in Key using this online calculator? To use this online calculator for Length of Kennedy Key given Compressive Stress in Key, enter Transmitted Torque by Kennedy Key (Mt_k), Diameter of Shaft using Key (d_s), Width of Key (b_k) & Compressive Stress in Key (σ_c) and hit the calculate button. Here is how the Length of Kennedy Key given Compressive Stress in Key calculation can be explained with given input values -> 39225.91 = sqrt(2)*712.7636/(0.04498998*0.005*128000000).

FAQ

What is Length of Kennedy Key given Compressive Stress in Key?

Length of Kennedy Key given Compressive Stress in Key formula is defined as a method to determine the appropriate dimensions of a Kennedy key based on the compressive stress it experiences. This ensures the key can effectively transmit torque without failing under load and is represented as l = sqrt(2)*Mt_k/(d_s*b_k*σ_c) or Length of Key = sqrt(2)*Transmitted Torque by Kennedy Key/(Diameter of Shaft using Key*Width of Key*Compressive Stress in Key). The Transmitted Torque by Kennedy Key is the torque that a Kennedy key can effectively transmit between two connected machine components without slipping or failure, The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission, The Width of Key is the measurement of the key's thickness, which ensures proper fit and function within a mechanical assembly, preventing slippage and ensuring torque transmission & The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.

How to calculate Length of Kennedy Key given Compressive Stress in Key?

Length of Kennedy Key given Compressive Stress in Key formula is defined as a method to determine the appropriate dimensions of a Kennedy key based on the compressive stress it experiences. This ensures the key can effectively transmit torque without failing under load is calculated using Length of Key = sqrt(2)*Transmitted Torque by Kennedy Key/(Diameter of Shaft using Key*Width of Key*Compressive Stress in Key). To calculate Length of Kennedy Key given Compressive Stress in Key, you need Transmitted Torque by Kennedy Key (Mt_k), Diameter of Shaft using Key (d_s), Width of Key (b_k) & Compressive Stress in Key (σ_c). With our tool, you need to enter the respective value for Transmitted Torque by Kennedy Key, Diameter of Shaft using Key, Width of Key & Compressive Stress in Key and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Key?

In this formula, Length of Key uses Transmitted Torque by Kennedy Key, Diameter of Shaft using Key, Width of Key & Compressive Stress in Key. We can use 1 other way(s) to calculate the same, which is/are as follows -

Length of Key = Transmitted Torque by Kennedy Key/(sqrt(2)*Diameter of Shaft using Key*Width of Key*Shear Stress in Key)

Home

FREE PDFs

🔍 Search