Length of Harbor given Density Influence Calculator

✖Density Current Velocity dependent upon the filling current component.ⓘ Density Current Velocity [V_D]			+10% -10%
✖Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.ⓘ Filling Current Velocity [V_f]			+10% -10%
✖Time Interval over which the Density Difference exists.ⓘ Time Interval [T_D]			+10% -10%
✖Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.ⓘ Density Influence [α_D]			+10% -10%

✖Length of Harbor dependent upon the filling current component.ⓘ Length of Harbor given Density Influence [L]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Density Currents in Harbors Formulas PDF PDF Image

Length of Harbor given Density Influence Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence)
L = (V_D-V_f)*T_D/(2*α_D)
This formula uses 5 Variables

Variables Used

Length of Harbor - (Measured in Meter) - Length of Harbor dependent upon the filling current component.
Density Current Velocity - (Measured in Meter per Second) - Density Current Velocity dependent upon the filling current component.
Filling Current Velocity - (Measured in Meter per Second) - Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.
Time Interval - (Measured in Second) - Time Interval over which the Density Difference exists.
Density Influence - Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.

STEP 1: Convert Input(s) to Base Unit

Density Current Velocity: 25 Meter per Second --> 25 Meter per Second No Conversion Required
Filling Current Velocity: 7 Meter per Second --> 7 Meter per Second No Conversion Required
Time Interval: 130 Second --> 130 Second No Conversion Required
Density Influence: 6.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (V_D-V_f)*T_D/(2*α_D) --> (25-7)*130/(2*6.5)

Evaluating ... ...

L = 180

STEP 3: Convert Result to Output's Unit

180 Meter --> No Conversion Required

FINAL ANSWER

180 Meter <-- Length of Harbor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Density Currents in Harbors » Density Influence » Length of Harbor given Density Influence

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Density Influence Calculators

Filling Current Velocity given Density Influence

LaTeX Go Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity)

Time Interval over which Density Difference exists given Density Influence

LaTeX Go Time Interval = (2*Length of Harbor*Density Influence)/(Density Current Velocity-Filling Current Velocity)

Length of Harbor given Density Influence

LaTeX Go Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence)

Density Influence

LaTeX Go Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor)

Length of Harbor given Density Influence Formula

LaTeX Go

Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence)
L = (V_D-V_f)*T_D/(2*α_D)

What is Density Current?

Density Current is defined as current that is produced by differences in density. Where a flow of sea water has a greater density than that of the water surrounding it, the denser water will dive beneath the less dense water. The density of sea water is affected by temperature, salinity, and the content of suspended sediment.

How to Calculate Length of Harbor given Density Influence?

Length of Harbor given Density Influence calculator uses Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence) to calculate the Length of Harbor, The Length of Harbor given Density Influence formula is defined as relating density influence parameter which is not independent of the harbour filling but is dependent upon the filling current component as well. Length of Harbor is denoted by L symbol.

How to calculate Length of Harbor given Density Influence using this online calculator? To use this online calculator for Length of Harbor given Density Influence, enter Density Current Velocity (V_D), Filling Current Velocity (V_f), Time Interval (T_D) & Density Influence (α_D) and hit the calculate button. Here is how the Length of Harbor given Density Influence calculation can be explained with given input values -> 180 = (25-7)*130/(2*6.5).

FAQ

What is Length of Harbor given Density Influence?

The Length of Harbor given Density Influence formula is defined as relating density influence parameter which is not independent of the harbour filling but is dependent upon the filling current component as well and is represented as L = (V_D-V_f)*T_D/(2*α_D) or Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence). Density Current Velocity dependent upon the filling current component, Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude, Time Interval over which the Density Difference exists & Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.

How to calculate Length of Harbor given Density Influence?

The Length of Harbor given Density Influence formula is defined as relating density influence parameter which is not independent of the harbour filling but is dependent upon the filling current component as well is calculated using Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence). To calculate Length of Harbor given Density Influence, you need Density Current Velocity (V_D), Filling Current Velocity (V_f), Time Interval (T_D) & Density Influence (α_D). With our tool, you need to enter the respective value for Density Current Velocity, Filling Current Velocity, Time Interval & Density Influence and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search