Length of displacer submerged in liquid Calculator

✖Buoyancy Force is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object.ⓘ Buoyancy Force [F_b]			+10% -10%
✖Fluid Specific Weight is the ratio of a body’s weight to its volume.ⓘ Fluid Specific Weight [γ]			+10% -10%
✖Pipe Diameter Level is the length of the longest chord of the pipe in which the liquid is flowing.ⓘ Pipe Diameter Level [D]			+10% -10%

✖Displacer Length is the distance from one end to the other, typically measured in units such as meters or inches, indicating its size or extent.ⓘ Length of displacer submerged in liquid [L]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Level Measurement Formulas PDF PDF Image

Length of displacer submerged in liquid Solution

STEP 0: Pre-Calculation Summary

Formula Used

Displacer Length = (4*Buoyancy Force)/(Fluid Specific Weight*pi*Pipe Diameter Level^2)
L = (4*F_b)/(γ*pi*D^2)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Displacer Length - (Measured in Meter) - Displacer Length is the distance from one end to the other, typically measured in units such as meters or inches, indicating its size or extent.
Buoyancy Force - (Measured in Newton) - Buoyancy Force is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object.
Fluid Specific Weight - (Measured in Newton per Cubic Meter) - Fluid Specific Weight is the ratio of a body’s weight to its volume.
Pipe Diameter Level - (Measured in Meter) - Pipe Diameter Level is the length of the longest chord of the pipe in which the liquid is flowing.

STEP 1: Convert Input(s) to Base Unit

Buoyancy Force: 10.75 Newton --> 10.75 Newton No Conversion Required
Fluid Specific Weight: 800 Newton per Cubic Meter --> 800 Newton per Cubic Meter No Conversion Required
Pipe Diameter Level: 0.07 Meter --> 0.07 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (4*F_b)/(γ*pi*D^2) --> (4*10.75)/(800*pi*0.07^2)

Evaluating ... ...

L = 3.4916645678324

STEP 3: Convert Result to Output's Unit

3.4916645678324 Meter --> No Conversion Required

FINAL ANSWER

3.4916645678324 ≈ 3.491665 Meter <-- Displacer Length

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics and Instrumentation » Measurement of Physical Parameters » Level Measurement » Length of displacer submerged in liquid

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Level Measurement Calculators

Cross-Sectional Area of Object

LaTeX Go Cross Section Area Level = Buoyancy Force/(Immersed Depth*Fluid Specific Weight)

Immersed Depth

LaTeX Go Immersed Depth = Buoyancy Force/(Cross Section Area Level*Fluid Specific Weight)

Buoyancy

LaTeX Go Buoyancy Force = Immersed Depth*Cross Section Area Level*Fluid Specific Weight

Depth of Fluid

LaTeX Go Depth = Pressure Change/Fluid Specific Weight

Length of displacer submerged in liquid Formula

LaTeX Go

Displacer Length = (4*Buoyancy Force)/(Fluid Specific Weight*pi*Pipe Diameter Level^2)
L = (4*F_b)/(γ*pi*D^2)

What is DP type level transmitter?

Differential Pressure (DP) Level Measurement uses pressure readings and specific gravity to output level. DP Level is a common measurement technique that is used in a wide variety of applications.

How to Calculate Length of displacer submerged in liquid?

Length of displacer submerged in liquid calculator uses Displacer Length = (4*Buoyancy Force)/(Fluid Specific Weight*pi*Pipe Diameter Level^2) to calculate the Displacer Length, The Length of displacer submerged in liquid formula is defined as Displacer level switches are sensors with electrical contact output at specific liquid level. Displacer Length is denoted by L symbol.

How to calculate Length of displacer submerged in liquid using this online calculator? To use this online calculator for Length of displacer submerged in liquid, enter Buoyancy Force (F_b), Fluid Specific Weight (γ) & Pipe Diameter Level (D) and hit the calculate button. Here is how the Length of displacer submerged in liquid calculation can be explained with given input values -> 3.491665 = (4*10.75)/(800*pi*0.07^2).

FAQ

What is Length of displacer submerged in liquid?

The Length of displacer submerged in liquid formula is defined as Displacer level switches are sensors with electrical contact output at specific liquid level and is represented as L = (4*F_b)/(γ*pi*D^2) or Displacer Length = (4*Buoyancy Force)/(Fluid Specific Weight*pi*Pipe Diameter Level^2). Buoyancy Force is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object, Fluid Specific Weight is the ratio of a body’s weight to its volume & Pipe Diameter Level is the length of the longest chord of the pipe in which the liquid is flowing.

How to calculate Length of displacer submerged in liquid?

The Length of displacer submerged in liquid formula is defined as Displacer level switches are sensors with electrical contact output at specific liquid level is calculated using Displacer Length = (4*Buoyancy Force)/(Fluid Specific Weight*pi*Pipe Diameter Level^2). To calculate Length of displacer submerged in liquid, you need Buoyancy Force (F_b), Fluid Specific Weight (γ) & Pipe Diameter Level (D). With our tool, you need to enter the respective value for Buoyancy Force, Fluid Specific Weight & Pipe Diameter Level and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search