Length of Crest when Discharge and Velocity is not considered Calculator

✖Francis Discharge with Suppressed End is discharge of flow without the end contraction.ⓘ Francis Discharge with Suppressed End [Q_Fr']			+10% -10%
✖Still Water Head is the head of water which is still over weir.ⓘ Still Water Head [H_Stillwater]			+10% -10%

✖Length of Weir Crest is the measurement or extent of Weir Crest from end to end.ⓘ Length of Crest when Discharge and Velocity is not considered [L_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Over Rectangular Sharp Crested Weir or Notch Formulas PDF PDF Image

Length of Crest when Discharge and Velocity is not considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2))
L_w = Q_Fr'/(1.84*H_Stillwater^(3/2))
This formula uses 3 Variables

Variables Used

Length of Weir Crest - (Measured in Meter) - Length of Weir Crest is the measurement or extent of Weir Crest from end to end.
Francis Discharge with Suppressed End - (Measured in Cubic Meter per Second) - Francis Discharge with Suppressed End is discharge of flow without the end contraction.
Still Water Head - (Measured in Meter) - Still Water Head is the head of water which is still over weir.

STEP 1: Convert Input(s) to Base Unit

Francis Discharge with Suppressed End: 28 Cubic Meter per Second --> 28 Cubic Meter per Second No Conversion Required
Still Water Head: 6.6 Meter --> 6.6 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_w = Q_Fr'/(1.84*H_Stillwater^(3/2)) --> 28/(1.84*6.6^(3/2))

Evaluating ... ...

L_w = 0.897479019949055

STEP 3: Convert Result to Output's Unit

0.897479019949055 Meter --> No Conversion Required

FINAL ANSWER

0.897479019949055 ≈ 0.897479 Meter <-- Length of Weir Crest

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Flow Over Rectangular Sharp Crested Weir or Notch » Length of Crest » Length of Crest when Discharge and Velocity is not considered

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Length of Crest Calculators

Length of Crest considering Velocity

LaTeX Go Length of Weir Crest = ((3*Francis Discharge with Suppressed End)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Still Water Head^(3/2)-Velocity Head^(3/2))))+(0.1*Number of End Contraction*Still Water Head)

Length of Crest given Discharge Passing over Weir

LaTeX Go Length of Weir Crest = (Francis Discharge with Suppressed End*3)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2)))

Length of Crest without considering Velocity

LaTeX Go Length of Weir Crest = ((Francis Discharge*2)/(3*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)))^(2/3)+(0.1*Number of End Contraction*Height of Water above Crest of Weir)

Length of Crest when Francis Formula Discharge and Velocity is not considered

LaTeX Go Length of Weir Crest = (Francis Discharge/(1.84*Height of Water above Crest of Weir^(3/2)))+(0.1*Number of End Contraction*Height of Water above Crest of Weir)

Length of Crest when Discharge and Velocity is not considered Formula

LaTeX Go

Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2))
L_w = Q_Fr'/(1.84*H_Stillwater^(3/2))

What is Discharge?

The Discharge Over the Weir is a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass.

How to Calculate Length of Crest when Discharge and Velocity is not considered?

Length of Crest when Discharge and Velocity is not considered calculator uses Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)) to calculate the Length of Weir Crest, Length of Crest when Discharge and Velocity is not considered is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis. Length of Weir Crest is denoted by L_w symbol.

How to calculate Length of Crest when Discharge and Velocity is not considered using this online calculator? To use this online calculator for Length of Crest when Discharge and Velocity is not considered, enter Francis Discharge with Suppressed End (Q_Fr') & Still Water Head (H_Stillwater) and hit the calculate button. Here is how the Length of Crest when Discharge and Velocity is not considered calculation can be explained with given input values -> 0.897479 = 28/(1.84*6.6^(3/2)).

FAQ

What is Length of Crest when Discharge and Velocity is not considered?

Length of Crest when Discharge and Velocity is not considered is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis and is represented as L_w = Q_Fr'/(1.84*H_Stillwater^(3/2)) or Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)). Francis Discharge with Suppressed End is discharge of flow without the end contraction & Still Water Head is the head of water which is still over weir.

How to calculate Length of Crest when Discharge and Velocity is not considered?

Length of Crest when Discharge and Velocity is not considered is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis is calculated using Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)). To calculate Length of Crest when Discharge and Velocity is not considered, you need Francis Discharge with Suppressed End (Q_Fr') & Still Water Head (H_Stillwater). With our tool, you need to enter the respective value for Francis Discharge with Suppressed End & Still Water Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Weir Crest?

In this formula, Length of Weir Crest uses Francis Discharge with Suppressed End & Still Water Head. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length of Weir Crest = (Francis Discharge with Suppressed End*3)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2)))
Length of Weir Crest = ((Francis Discharge*2)/(3*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)))^(2/3)+(0.1*Number of End Contraction*Height of Water above Crest of Weir)
Length of Weir Crest = ((3*Francis Discharge with Suppressed End)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Still Water Head^(3/2)-Velocity Head^(3/2))))+(0.1*Number of End Contraction*Still Water Head)

Home

FREE PDFs

🔍 Search