Length of Chip using Thickness of Chip Calculator

✖Mass of Chip is the actual mass of the chip obtained.ⓘ Mass of Chip [m_c]			+10% -10%
✖Chip Thickness is defined as the actual thickness of the chip after cutting.ⓘ Chip Thickness [a_o]			+10% -10%
✖The Width of Chip is the actual width of the chip formed.ⓘ Width of Chip [a_w]			+10% -10%
✖Density of Work Piece is the mass per unit volume ratio of the material of workpiece.ⓘ Density of Work Piece [ρ]			+10% -10%

✖The Length of Chip is the actual length of the chip formed.ⓘ Length of Chip using Thickness of Chip [l_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Length of Chip using Thickness of Chip Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Chip = Mass of Chip/(Chip Thickness*Width of Chip*Density of Work Piece)
l_c = m_c/(a_o*a_w*ρ)
This formula uses 5 Variables

Variables Used

Length of Chip - (Measured in Meter) - The Length of Chip is the actual length of the chip formed.
Mass of Chip - (Measured in Kilogram) - Mass of Chip is the actual mass of the chip obtained.
Chip Thickness - (Measured in Meter) - Chip Thickness is defined as the actual thickness of the chip after cutting.
Width of Chip - (Measured in Meter) - The Width of Chip is the actual width of the chip formed.
Density of Work Piece - (Measured in Kilogram per Cubic Meter) - Density of Work Piece is the mass per unit volume ratio of the material of workpiece.

STEP 1: Convert Input(s) to Base Unit

Mass of Chip: 18.54562 Milligram --> 1.854562E-05 Kilogram (Check conversion here)
Chip Thickness: 0.099 Millimeter --> 9.9E-05 Meter (Check conversion here)
Width of Chip: 2.5 Millimeter --> 0.0025 Meter (Check conversion here)
Density of Work Piece: 59469.68 Kilogram per Cubic Meter --> 59469.68 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l_c = m_c/(a_o*a_w*ρ) --> 1.854562E-05/(9.9E-05*0.0025*59469.68)

Evaluating ... ...

l_c = 0.00126000001983865

STEP 3: Convert Result to Output's Unit

0.00126000001983865 Meter -->1.26000001983865 Millimeter (Check conversion here)

FINAL ANSWER

1.26000001983865 ≈ 1.26 Millimeter <-- Length of Chip

(Calculation completed in 00.035 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Metal Machining Dynamics » Chip Control » Length of Chip using Thickness of Chip

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Chip Control Calculators

Metal Removal Rate given Specific Cutting Energy

LaTeX Go Metal Removal Rate = Rate of Energy Consumption during Machining/Specific Cutting Energy in Machining

Undeformed Chip Thickness using Length of Shear Plane of Chip

LaTeX Go Undeformed Chip Thickness = Length of Shear Plane*sin(Shear Angle)

Length of Shear Plane of Chip

LaTeX Go Length of Shear Plane = Undeformed Chip Thickness/sin(Shear Angle)

Cross Sectional Area of Uncut chip using Specific Cutting energy in Machining

LaTeX Go Cross Sectional Area of Uncut Chip = Cutting Force/Specific Cutting Energy in Machining

Length of Chip using Thickness of Chip Formula

LaTeX Go

Length of Chip = Mass of Chip/(Chip Thickness*Width of Chip*Density of Work Piece)
l_c = m_c/(a_o*a_w*ρ)

What is the importance of chip thickness ratio?

Chip thickness ratio, also called cutting ratio (rcu), is one important parameter for machining analysis as it indicates the deformation (elongation) of the chip in its thickness.

How to Calculate Length of Chip using Thickness of Chip?

Length of Chip using Thickness of Chip calculator uses Length of Chip = Mass of Chip/(Chip Thickness*Width of Chip*Density of Work Piece) to calculate the Length of Chip, Length of chip using thickness of chip is the actual length of the chip specimen taken under consideration. Length of Chip is denoted by l_c symbol.

How to calculate Length of Chip using Thickness of Chip using this online calculator? To use this online calculator for Length of Chip using Thickness of Chip, enter Mass of Chip (m_c), Chip Thickness (a_o), Width of Chip (a_w) & Density of Work Piece (ρ) and hit the calculate button. Here is how the Length of Chip using Thickness of Chip calculation can be explained with given input values -> 1272.584 = 1.854562E-05/(9.9E-05*0.0025*59469.68).

FAQ

What is Length of Chip using Thickness of Chip?

Length of chip using thickness of chip is the actual length of the chip specimen taken under consideration and is represented as l_c = m_c/(a_o*a_w*ρ) or Length of Chip = Mass of Chip/(Chip Thickness*Width of Chip*Density of Work Piece). Mass of Chip is the actual mass of the chip obtained, Chip Thickness is defined as the actual thickness of the chip after cutting, The Width of Chip is the actual width of the chip formed & Density of Work Piece is the mass per unit volume ratio of the material of workpiece.

How to calculate Length of Chip using Thickness of Chip?

Length of chip using thickness of chip is the actual length of the chip specimen taken under consideration is calculated using Length of Chip = Mass of Chip/(Chip Thickness*Width of Chip*Density of Work Piece). To calculate Length of Chip using Thickness of Chip, you need Mass of Chip (m_c), Chip Thickness (a_o), Width of Chip (a_w) & Density of Work Piece (ρ). With our tool, you need to enter the respective value for Mass of Chip, Chip Thickness, Width of Chip & Density of Work Piece and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search