Length of Cable for UDL on Parabolic Cable Solution

STEP 0: Pre-Calculation Summary
Formula Used
Cable Length = Cable Span+(8*(Maximum Sag^2)/(3*Cable Span))
Scable = Lspan+(8*(d^2)/(3*Lspan))
This formula uses 3 Variables
Variables Used
Cable Length - (Measured in Meter) - Cable Length is the length measured along the catenary of cable.
Cable Span - (Measured in Meter) - Cable Span is total length of cable in horizontal direction.
Maximum Sag - (Measured in Meter) - Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.
STEP 1: Convert Input(s) to Base Unit
Cable Span: 15 Meter --> 15 Meter No Conversion Required
Maximum Sag: 1.44 Meter --> 1.44 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Scable = Lspan+(8*(d^2)/(3*Lspan)) --> 15+(8*(1.44^2)/(3*15))
Evaluating ... ...
Scable = 15.36864
STEP 3: Convert Result to Output's Unit
15.36864 Meter --> No Conversion Required
FINAL ANSWER
15.36864 Meter <-- Cable Length
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Parabolic Cable Tension and Length Calculators

Tension at Midspan given Tension at Supports for UDL on Parabolic Cable
​ LaTeX ​ Go Tension at Midspan = sqrt((Tension at Supports^2)-(((Uniformly Distributed Load*Cable Span)/2)^2))
UDL given Tension at Supports for UDL on Parabolic Cable
​ LaTeX ​ Go Uniformly Distributed Load = (sqrt((Tension at Supports^2)-(Tension at Midspan^2))*2)/Cable Span
Tension at Supports for UDL on Parabolic Cable
​ LaTeX ​ Go Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2)
Maximum Sag given Tension at Midspan for UDL on Parabolic Cable
​ LaTeX ​ Go Maximum Sag = Uniformly Distributed Load*(Cable Span^2)/(8*Tension at Midspan)

Length of Cable for UDL on Parabolic Cable Formula

​LaTeX ​Go
Cable Length = Cable Span+(8*(Maximum Sag^2)/(3*Cable Span))
Scable = Lspan+(8*(d^2)/(3*Lspan))

What is Cable?

A cable is a thick wire, or a group of wires inside a rubber or plastic covering, which is used to carry electricity or electronic signals. Cable is used to refer to television systems in which the signals are sent along underground wires rather than by radio waves.

How to Calculate Length of Cable for UDL on Parabolic Cable?

Length of Cable for UDL on Parabolic Cable calculator uses Cable Length = Cable Span+(8*(Maximum Sag^2)/(3*Cable Span)) to calculate the Cable Length, The Length of Cable for UDL on Parabolic Cable formula is defined as the total length of cable along its catenary. Cable Length is denoted by Scable symbol.

How to calculate Length of Cable for UDL on Parabolic Cable using this online calculator? To use this online calculator for Length of Cable for UDL on Parabolic Cable, enter Cable Span (Lspan) & Maximum Sag (d) and hit the calculate button. Here is how the Length of Cable for UDL on Parabolic Cable calculation can be explained with given input values -> 15.36864 = 15+(8*(1.44^2)/(3*15)).

FAQ

What is Length of Cable for UDL on Parabolic Cable?
The Length of Cable for UDL on Parabolic Cable formula is defined as the total length of cable along its catenary and is represented as Scable = Lspan+(8*(d^2)/(3*Lspan)) or Cable Length = Cable Span+(8*(Maximum Sag^2)/(3*Cable Span)). Cable Span is total length of cable in horizontal direction & Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.
How to calculate Length of Cable for UDL on Parabolic Cable?
The Length of Cable for UDL on Parabolic Cable formula is defined as the total length of cable along its catenary is calculated using Cable Length = Cable Span+(8*(Maximum Sag^2)/(3*Cable Span)). To calculate Length of Cable for UDL on Parabolic Cable, you need Cable Span (Lspan) & Maximum Sag (d). With our tool, you need to enter the respective value for Cable Span & Maximum Sag and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!