Length of Bottom Weld given Area of Unsymmetrical Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%
✖Length of top weld is the linear distance of each weld segment.ⓘ Length of Top Weld [L_{top weld}]			+10% -10%

✖Length of bottom weld is the linear distance of each weld segment.ⓘ Length of Bottom Weld given Area of Unsymmetrical Weld [L₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Length of Bottom Weld given Area of Unsymmetrical Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Bottom Weld = Weld Bed Area/(0.707*Thickness of Plate)-Length of Top Weld
L₂ = A_{weld bed}/(0.707*t_plate)-L_{top weld}
This formula uses 4 Variables

Variables Used

Length of Bottom Weld - (Measured in Meter) - Length of bottom weld is the linear distance of each weld segment.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Length of Top Weld - (Measured in Meter) - Length of top weld is the linear distance of each weld segment.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)
Length of Top Weld: 4 Millimeter --> 0.004 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L₂ = A_{weld bed}/(0.707*t_plate)-L_{top weld} --> 0.0009/(0.707*0.012)-0.004

Evaluating ... ...

L₂ = 0.102082036775106

STEP 3: Convert Result to Output's Unit

0.102082036775106 Meter -->102.082036775106 Millimeter (Check conversion here)

FINAL ANSWER

102.082036775106 ≈ 102.082 Millimeter <-- Length of Bottom Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Analysis of Unsymmetrical Welded Sections which are Loaded Axially » Mechanical » Bottom Weld » Length of Bottom Weld given Area of Unsymmetrical Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Bottom Weld Calculators

Distance of Bottom Weld from Gravity Axis given Moment and Length of Bottom Weld

LaTeX Go Distance of Bottom Weld from Gravity Axis = Moment of Inertia of Weld/(Resistance of weld per unit length*Length of Bottom Weld)

Distance of Bottom Weld from Gravity Axis given Length of Bottom Weld and Total Length of Weld

LaTeX Go Distance of Bottom Weld from Gravity Axis = (Total length of weld/Length of Top Weld-1)*Distance of top weld from gravity axis

Distance of Bottom Weld from Gravity Axis given Length of Top Weld and Total Length of Weld

LaTeX Go Distance of Bottom Weld from Gravity Axis = Distance of top weld from gravity axis/(Total length of weld/Length of Top Weld-1)

Distance of Bottom Weld from Gravity Axis given Moment of Bottom Weld about Gravity Axis

LaTeX Go Distance of Bottom Weld from Gravity Axis = Moment of Inertia of Weld/(Resistance of bottom weld)

Length of Bottom Weld given Area of Unsymmetrical Weld Formula

LaTeX Go

Length of Bottom Weld = Weld Bed Area/(0.707*Thickness of Plate)-Length of Top Weld
L₂ = A_{weld bed}/(0.707*t_plate)-L_{top weld}

What is axial load and radial load?

Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).

How to Calculate Length of Bottom Weld given Area of Unsymmetrical Weld?

Length of Bottom Weld given Area of Unsymmetrical Weld calculator uses Length of Bottom Weld = Weld Bed Area/(0.707*Thickness of Plate)-Length of Top Weld to calculate the Length of Bottom Weld, The Length of bottom weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end. Length of Bottom Weld is denoted by L₂ symbol.

How to calculate Length of Bottom Weld given Area of Unsymmetrical Weld using this online calculator? To use this online calculator for Length of Bottom Weld given Area of Unsymmetrical Weld, enter Weld Bed Area (A_{weld bed}), Thickness of Plate (t_plate) & Length of Top Weld (L_{top weld}) and hit the calculate button. Here is how the Length of Bottom Weld given Area of Unsymmetrical Weld calculation can be explained with given input values -> 102082 = 0.0009/(0.707*0.012)-0.004.

FAQ

What is Length of Bottom Weld given Area of Unsymmetrical Weld?

The Length of bottom weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end and is represented as L₂ = A_{weld bed}/(0.707*t_plate)-L_{top weld} or Length of Bottom Weld = Weld Bed Area/(0.707*Thickness of Plate)-Length of Top Weld. Weld Bed Area is that area which is prepared by joining two metals for welding, The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness & Length of top weld is the linear distance of each weld segment.

How to calculate Length of Bottom Weld given Area of Unsymmetrical Weld?

The Length of bottom weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end is calculated using Length of Bottom Weld = Weld Bed Area/(0.707*Thickness of Plate)-Length of Top Weld. To calculate Length of Bottom Weld given Area of Unsymmetrical Weld, you need Weld Bed Area (A_{weld bed}), Thickness of Plate (t_plate) & Length of Top Weld (L_{top weld}). With our tool, you need to enter the respective value for Weld Bed Area, Thickness of Plate & Length of Top Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Bottom Weld?

In this formula, Length of Bottom Weld uses Weld Bed Area, Thickness of Plate & Length of Top Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length of Bottom Weld = (Distance of top weld from gravity axis*Total length of weld)/(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis)
Length of Bottom Weld = Axial load on angle/Resistance of weld per unit length-Length of Top Weld
Length of Bottom Weld = (Length of Top Weld*Distance of top weld from gravity axis)/(Distance of Bottom Weld from Gravity Axis)

Home

FREE PDFs

🔍 Search