Length of Bent Part in Bending Operation Calculator

✖Bending Force is the force required to bend a particular material about an axis.ⓘ Bending Force [F_B]			+10% -10%
✖Width between Contact Points is the necessary width between contact points to prevent defects and produce desired results.ⓘ Width between Contact Points [w]			+10% -10%
✖Bending Die Constant is a numerical value used in metal working to quantify the relationship between applied force and material deformation during bending operations.ⓘ Bending Die Constant [K_bd]			+10% -10%
✖Ultimate Tensile Strength (UTS) is the maximum stress that a material can endure before breaking under tension.ⓘ Ultimate Tensile Strength [σ_ut]			+10% -10%
✖Thickness of Stock generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.ⓘ Thickness of Stock [t_stk]			+10% -10%

✖Bent Part Length is the portion of the stock needed to be bent using bending operation.ⓘ Length of Bent Part in Bending Operation [L_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sheet Metal Operations Formulas PDF PDF Image

Length of Bent Part in Bending Operation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2)
L_b = (F_B*w)/(K_bd*σ_ut*t_stk^2)
This formula uses 6 Variables

Variables Used

Bent Part Length - (Measured in Meter) - Bent Part Length is the portion of the stock needed to be bent using bending operation.
Bending Force - (Measured in Newton) - Bending Force is the force required to bend a particular material about an axis.
Width between Contact Points - (Measured in Meter) - Width between Contact Points is the necessary width between contact points to prevent defects and produce desired results.
Bending Die Constant - Bending Die Constant is a numerical value used in metal working to quantify the relationship between applied force and material deformation during bending operations.
Ultimate Tensile Strength - (Measured in Pascal) - Ultimate Tensile Strength (UTS) is the maximum stress that a material can endure before breaking under tension.
Thickness of Stock - (Measured in Meter) - Thickness of Stock generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.

STEP 1: Convert Input(s) to Base Unit

Bending Force: 32.5425 Newton --> 32.5425 Newton No Conversion Required
Width between Contact Points: 34.99162 Millimeter --> 0.03499162 Meter (Check conversion here)
Bending Die Constant: 0.031 --> No Conversion Required
Ultimate Tensile Strength: 450 Newton per Square Millimeter --> 450000000 Pascal (Check conversion here)
Thickness of Stock: 9 Millimeter --> 0.009 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_b = (F_B*w)/(K_bd*σ_ut*t_stk^2) --> (32.5425*0.03499162)/(0.031*450000000*0.009^2)

Evaluating ... ...

L_b = 0.00100775679795566

STEP 3: Convert Result to Output's Unit

0.00100775679795566 Meter -->1.00775679795566 Millimeter (Check conversion here)

FINAL ANSWER

1.00775679795566 ≈ 1.007757 Millimeter <-- Bent Part Length

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Sheet Metal Operations » Bending Operation » Length of Bent Part in Bending Operation

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< Bending Operation Calculators

Stock Thickness used in Bending Operation

LaTeX Go Thickness of Stock = sqrt((Bending Force*Width between Contact Points)/(Bending Die Constant*Bent Part Length*Ultimate Tensile Strength))

Length of Bent Part in Bending Operation

LaTeX Go Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2)

Width between Contact Points during Bending

LaTeX Go Width between Contact Points = (Bending Die Constant*Bent Part Length*Ultimate Tensile Strength*Blank Thickness^2)/Bending Force

Bending Force

LaTeX Go Bending Force = (Bending Die Constant*Bent Part Length*Ultimate Tensile Strength*Blank Thickness^2)/Width between Contact Points

Length of Bent Part in Bending Operation Formula

LaTeX Go

Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2)
L_b = (F_B*w)/(K_bd*σ_ut*t_stk^2)

What is Bending operation ?

Bending refers to the operation of deforming a flat sheet around a straight axis where the neutral plane lies. The disposition of the stresses in a bent specimen, is due to the applied forces, the top layers are in tension and bottom layers are in compression. The plane with no stresses is called the neutral axis. The neutral axis should be at the centre when the material is elastically deformed. But when the material reaches the plastic stage, the neutral axis moves downward, since the material oppose compression much better than tension.

How to Calculate Length of Bent Part in Bending Operation?

Length of Bent Part in Bending Operation calculator uses Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2) to calculate the Bent Part Length, Length of Bent Part in Bending Operation is the portion of the stock needed to be bent using bending operation. Bent Part Length is denoted by L_b symbol.

How to calculate Length of Bent Part in Bending Operation using this online calculator? To use this online calculator for Length of Bent Part in Bending Operation, enter Bending Force (F_B), Width between Contact Points (w), Bending Die Constant (K_bd), Ultimate Tensile Strength (σ_ut) & Thickness of Stock (t_stk) and hit the calculate button. Here is how the Length of Bent Part in Bending Operation calculation can be explained with given input values -> 1007.757 = (32.5425*0.03499162)/(0.031*450000000*0.009^2).

FAQ

What is Length of Bent Part in Bending Operation?

Length of Bent Part in Bending Operation is the portion of the stock needed to be bent using bending operation and is represented as L_b = (F_B*w)/(K_bd*σ_ut*t_stk^2) or Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2). Bending Force is the force required to bend a particular material about an axis, Width between Contact Points is the necessary width between contact points to prevent defects and produce desired results, Bending Die Constant is a numerical value used in metal working to quantify the relationship between applied force and material deformation during bending operations, Ultimate Tensile Strength (UTS) is the maximum stress that a material can endure before breaking under tension & Thickness of Stock generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.

How to calculate Length of Bent Part in Bending Operation?

Length of Bent Part in Bending Operation is the portion of the stock needed to be bent using bending operation is calculated using Bent Part Length = (Bending Force*Width between Contact Points)/(Bending Die Constant*Ultimate Tensile Strength*Thickness of Stock^2). To calculate Length of Bent Part in Bending Operation, you need Bending Force (F_B), Width between Contact Points (w), Bending Die Constant (K_bd), Ultimate Tensile Strength (σ_ut) & Thickness of Stock (t_stk). With our tool, you need to enter the respective value for Bending Force, Width between Contact Points, Bending Die Constant, Ultimate Tensile Strength & Thickness of Stock and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search