Leg of Weld given Maximum Shear Stress-induced in Plane Calculator

✖Load per unit length in transverse fillet weld is the load-bearing capacity of the double transverse fillet weld per unit length of the weld.ⓘ Load per Unit Length in Transverse Fillet Weld [P_a]			+10% -10%
✖Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.ⓘ Maximum Shear Stress in Transverse Fillet Weld [𝜏_max]			+10% -10%

✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld given Maximum Shear Stress-induced in Plane [h_l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transverse Fillet Weld Formulas PDF PDF Image

Leg of Weld given Maximum Shear Stress-induced in Plane Solution

STEP 0: Pre-Calculation Summary

Formula Used

Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld)
h_l = 1.21*P_a/(𝜏_max)
This formula uses 3 Variables

Variables Used

Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Load per Unit Length in Transverse Fillet Weld - (Measured in Newton per Meter) - Load per unit length in transverse fillet weld is the load-bearing capacity of the double transverse fillet weld per unit length of the weld.
Maximum Shear Stress in Transverse Fillet Weld - (Measured in Pascal) - Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.

STEP 1: Convert Input(s) to Base Unit

Load per Unit Length in Transverse Fillet Weld: 1378 Newton per Millimeter --> 1378000 Newton per Meter (Check conversion here)
Maximum Shear Stress in Transverse Fillet Weld: 79 Newton per Square Millimeter --> 79000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_l = 1.21*P_a/(𝜏_max) --> 1.21*1378000/(79000000)

Evaluating ... ...

h_l = 0.0211060759493671

STEP 3: Convert Result to Output's Unit

0.0211060759493671 Meter -->21.1060759493671 Millimeter (Check conversion here)

FINAL ANSWER

21.1060759493671 ≈ 21.10608 Millimeter <-- Leg of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Transverse Fillet Weld » Leg of Weld given Maximum Shear Stress-induced in Plane

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Transverse Fillet Weld Calculators

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

LaTeX Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)

Tensile Stress in Transverse Fillet Weld

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

LaTeX Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld

Permissible Tensile Strength for Double Transverse Fillet Joint

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)

Leg of Weld given Maximum Shear Stress-induced in Plane Formula

LaTeX Go

Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld)
h_l = 1.21*P_a/(𝜏_max)

Define Fillet Weld?

Fillet welding refers to the process of joining two pieces of metal together when they are perpendicular or at an angle. These welds are commonly referred to as tee joints, which are two pieces of metal perpendicular to each other, or lap joints, which are two pieces of metal that overlap and are welded at the edges. The weld is triangular in shape and may have a concave, flat or convex surface depending on the welder’s technique. Welders use fillet welds when connecting flanges to pipes and welding cross sections of infrastructure, and when bolts aren't strong enough and will wear off easily.[

How to Calculate Leg of Weld given Maximum Shear Stress-induced in Plane?

Leg of Weld given Maximum Shear Stress-induced in Plane calculator uses Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld) to calculate the Leg of Weld, The Leg of Weld given Maximum Shear Stress-induced in Plane formula is defined as the distance from the joint root to the toe of the weld. Leg of Weld is denoted by h_l symbol.

How to calculate Leg of Weld given Maximum Shear Stress-induced in Plane using this online calculator? To use this online calculator for Leg of Weld given Maximum Shear Stress-induced in Plane, enter Load per Unit Length in Transverse Fillet Weld (P_a) & Maximum Shear Stress in Transverse Fillet Weld (𝜏_max) and hit the calculate button. Here is how the Leg of Weld given Maximum Shear Stress-induced in Plane calculation can be explained with given input values -> 21106.08 = 1.21*1378000/(79000000).

FAQ

What is Leg of Weld given Maximum Shear Stress-induced in Plane?

The Leg of Weld given Maximum Shear Stress-induced in Plane formula is defined as the distance from the joint root to the toe of the weld and is represented as h_l = 1.21*P_a/(𝜏_max) or Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld). Load per unit length in transverse fillet weld is the load-bearing capacity of the double transverse fillet weld per unit length of the weld & Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.

How to calculate Leg of Weld given Maximum Shear Stress-induced in Plane?

The Leg of Weld given Maximum Shear Stress-induced in Plane formula is defined as the distance from the joint root to the toe of the weld is calculated using Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld). To calculate Leg of Weld given Maximum Shear Stress-induced in Plane, you need Load per Unit Length in Transverse Fillet Weld (P_a) & Maximum Shear Stress in Transverse Fillet Weld (𝜏_max). With our tool, you need to enter the respective value for Load per Unit Length in Transverse Fillet Weld & Maximum Shear Stress in Transverse Fillet Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Leg of Weld?

In this formula, Leg of Weld uses Load per Unit Length in Transverse Fillet Weld & Maximum Shear Stress in Transverse Fillet Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Leg of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Length of Weld)
Leg of Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Maximum Shear Stress in Transverse Fillet Weld)

Home

FREE PDFs

🔍 Search