Leg of Parallel Fillet Weld given Throat of Weld Calculator

✖Throat thickness of weld is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness of Weld [h_t]

+10%

-10%

✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Parallel Fillet Weld given Throat of Weld [h_l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF PDF Image

Leg of Parallel Fillet Weld given Throat of Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Leg of Weld = Throat Thickness of Weld/cos(pi/4)
h_l = h_t/cos(pi/4)
This formula uses 1 Constants, 1 Functions, 2 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Throat Thickness of Weld - (Measured in Meter) - Throat thickness of weld is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Throat Thickness of Weld: 15 Millimeter --> 0.015 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_l = h_t/cos(pi/4) --> 0.015/cos(pi/4)

Evaluating ... ...

h_l = 0.0212132034355964

STEP 3: Convert Result to Output's Unit

0.0212132034355964 Meter -->21.2132034355964 Millimeter (Check conversion here)

FINAL ANSWER

21.2132034355964 ≈ 21.2132 Millimeter <-- Leg of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Parallel Fillet Welds » Leg of Parallel Fillet Weld given Throat of Weld

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Parallel Fillet Welds Calculators

Shear Stress in Double Parallel Fillet Weld

LaTeX Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Leg of Parallel Fillet Weld given Throat of Weld

LaTeX Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

LaTeX Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Leg of Parallel Fillet Weld given Throat of Weld Formula

LaTeX Go

Leg of Weld = Throat Thickness of Weld/cos(pi/4)
h_l = h_t/cos(pi/4)

Determination of Leg of Weld?

Fillet Leg Sizes are equal to the length of the legs of the largest Right-Angled Triangle that may be inscribed within the Fillet Weld cross-section.
A general rule of thumb is that the Leg Size of the Weld should be equal to the thickness of the thinnest member.

How to Calculate Leg of Parallel Fillet Weld given Throat of Weld?

Leg of Parallel Fillet Weld given Throat of Weld calculator uses Leg of Weld = Throat Thickness of Weld/cos(pi/4) to calculate the Leg of Weld, Leg of Parallel Fillet Weld given Throat of Weld is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load. Leg of Weld is denoted by h_l symbol.

How to calculate Leg of Parallel Fillet Weld given Throat of Weld using this online calculator? To use this online calculator for Leg of Parallel Fillet Weld given Throat of Weld, enter Throat Thickness of Weld (h_t) and hit the calculate button. Here is how the Leg of Parallel Fillet Weld given Throat of Weld calculation can be explained with given input values -> 21213.2 = 0.015/cos(pi/4).

FAQ

What is Leg of Parallel Fillet Weld given Throat of Weld?

Leg of Parallel Fillet Weld given Throat of Weld is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load and is represented as h_l = h_t/cos(pi/4) or Leg of Weld = Throat Thickness of Weld/cos(pi/4). Throat thickness of weld is the shortest distance from the root to the face of the weld.

How to calculate Leg of Parallel Fillet Weld given Throat of Weld?

Leg of Parallel Fillet Weld given Throat of Weld is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load is calculated using Leg of Weld = Throat Thickness of Weld/cos(pi/4). To calculate Leg of Parallel Fillet Weld given Throat of Weld, you need Throat Thickness of Weld (h_t). With our tool, you need to enter the respective value for Throat Thickness of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Leg of Weld?

In this formula, Leg of Weld uses Throat Thickness of Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Leg of Weld = Load on Parallel Fillet Weld/(Shear Stress in Parallel Fillet Weld*Length of Weld*cos(pi/4))
Leg of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Shear Stress in Parallel Fillet Weld)

Home

FREE PDFs

🔍 Search