Lateral Surface Area of Paraboloid given Height Calculator

✖Shape Parameter of Paraboloid is the total length of the boundary or outer edge of Paraboloid.ⓘ Shape Parameter of Paraboloid [p]			+10% -10%
✖Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.ⓘ Height of Paraboloid [h]			+10% -10%

✖Lateral Surface Area of Paraboloid is the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid.ⓘ Lateral Surface Area of Paraboloid given Height [LSA]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Paraboloid Formula PDF PDF Image

Lateral Surface Area of Paraboloid given Height Solution

STEP 0: Pre-Calculation Summary

Formula Used

Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1)
LSA = pi/(6*p^2)*((1+4*h*p)^(3/2)-1)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Lateral Surface Area of Paraboloid - (Measured in Square Meter) - Lateral Surface Area of Paraboloid is the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid.
Shape Parameter of Paraboloid - Shape Parameter of Paraboloid is the total length of the boundary or outer edge of Paraboloid.
Height of Paraboloid - (Measured in Meter) - Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.

STEP 1: Convert Input(s) to Base Unit

Shape Parameter of Paraboloid: 2 --> No Conversion Required
Height of Paraboloid: 50 Meter --> 50 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

LSA = pi/(6*p^2)*((1+4*h*p)^(3/2)-1) --> pi/(6*2^2)*((1+4*50*2)^(3/2)-1)

Evaluating ... ...

LSA = 1050.99609566725

STEP 3: Convert Result to Output's Unit

1050.99609566725 Square Meter --> No Conversion Required

FINAL ANSWER

1050.99609566725 ≈ 1050.996 Square Meter <-- Lateral Surface Area of Paraboloid

(Calculation completed in 00.020 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Paraboloid » Surface Area of Paraboloid » Lateral Surface Area of Paraboloid » Lateral Surface Area of Paraboloid given Height

Credits

Created by Divanshi Jain

Netaji Subhash University of Technology, Delhi (NSUT Delhi), Dwarka

Divanshi Jain has created this Calculator and 300+ more calculators!

Verified by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has verified this Calculator and 400+ more calculators!

< Lateral Surface Area of Paraboloid Calculators

Lateral Surface Area of Paraboloid given Volume

LaTeX Go Lateral Surface Area of Paraboloid = (pi*sqrt((2*Volume of Paraboloid)/(pi*Height of Paraboloid)))/(6*Height of Paraboloid^2)*(((2*Volume of Paraboloid)/(pi*Height of Paraboloid)+4*Height of Paraboloid^2)^(3/2)-(2*Volume of Paraboloid)/(pi*Height of Paraboloid)^(3/2))

Lateral Surface Area of Paraboloid

LaTeX Go Lateral Surface Area of Paraboloid = (pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3)

Lateral Surface Area of Paraboloid given Surface to Volume Ratio

LaTeX Go Lateral Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid-pi*Radius of Paraboloid^2

Lateral Surface Area of Paraboloid given Total Surface Area

LaTeX Go Lateral Surface Area of Paraboloid = Total Surface Area of Paraboloid-pi*Radius of Paraboloid^2

< Surface Area of Paraboloid Calculators

Total Surface Area of Paraboloid

LaTeX Go Total Surface Area of Paraboloid = ((pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3))+pi*Radius of Paraboloid^2

Lateral Surface Area of Paraboloid

LaTeX Go Lateral Surface Area of Paraboloid = (pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3)

Lateral Surface Area of Paraboloid given Height

LaTeX Go Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1)

Lateral Surface Area of Paraboloid given Total Surface Area

LaTeX Go Lateral Surface Area of Paraboloid = Total Surface Area of Paraboloid-pi*Radius of Paraboloid^2

Lateral Surface Area of Paraboloid given Height Formula

LaTeX Go

Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1)
LSA = pi/(6*p^2)*((1+4*h*p)^(3/2)-1)

What is Paraboloid?

In geometry, a Paraboloid is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry. Every plane section of a paraboloid by a plane parallel to the axis of symmetry is a parabola. The paraboloid is hyperbolic if every other plane section is either a hyperbola, or two crossing lines (in the case of a section by a tangent plane). The paraboloid is elliptic if every other nonempty plane section is either an ellipse, or a single point (in the case of a section by a tangent plane). A paraboloid is either elliptic or hyperbolic.

How to Calculate Lateral Surface Area of Paraboloid given Height?

Lateral Surface Area of Paraboloid given Height calculator uses Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1) to calculate the Lateral Surface Area of Paraboloid, The Lateral Surface Area of Paraboloid given Height formula is defined as the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid, calculated using height of Paraboloid. Lateral Surface Area of Paraboloid is denoted by LSA symbol.

How to calculate Lateral Surface Area of Paraboloid given Height using this online calculator? To use this online calculator for Lateral Surface Area of Paraboloid given Height, enter Shape Parameter of Paraboloid (p) & Height of Paraboloid (h) and hit the calculate button. Here is how the Lateral Surface Area of Paraboloid given Height calculation can be explained with given input values -> 1050.996 = pi/(6*2^2)*((1+4*50*2)^(3/2)-1).

FAQ

What is Lateral Surface Area of Paraboloid given Height?

The Lateral Surface Area of Paraboloid given Height formula is defined as the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid, calculated using height of Paraboloid and is represented as LSA = pi/(6*p^2)*((1+4*h*p)^(3/2)-1) or Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1). Shape Parameter of Paraboloid is the total length of the boundary or outer edge of Paraboloid & Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.

How to calculate Lateral Surface Area of Paraboloid given Height?

The Lateral Surface Area of Paraboloid given Height formula is defined as the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid, calculated using height of Paraboloid is calculated using Lateral Surface Area of Paraboloid = pi/(6*Shape Parameter of Paraboloid^2)*((1+4*Height of Paraboloid*Shape Parameter of Paraboloid)^(3/2)-1). To calculate Lateral Surface Area of Paraboloid given Height, you need Shape Parameter of Paraboloid (p) & Height of Paraboloid (h). With our tool, you need to enter the respective value for Shape Parameter of Paraboloid & Height of Paraboloid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Lateral Surface Area of Paraboloid?

In this formula, Lateral Surface Area of Paraboloid uses Shape Parameter of Paraboloid & Height of Paraboloid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Lateral Surface Area of Paraboloid = Total Surface Area of Paraboloid-pi*Radius of Paraboloid^2
Lateral Surface Area of Paraboloid = (pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3)
Lateral Surface Area of Paraboloid = (pi*sqrt((2*Volume of Paraboloid)/(pi*Height of Paraboloid)))/(6*Height of Paraboloid^2)*(((2*Volume of Paraboloid)/(pi*Height of Paraboloid)+4*Height of Paraboloid^2)^(3/2)-(2*Volume of Paraboloid)/(pi*Height of Paraboloid)^(3/2))

Home

FREE PDFs

🔍 Search