Lateral Slip Velocity Calculator

✖Axle Speed over Roadway is the speed of the axle in relation to the roadway, influencing the tire behavior and overall performance of a racing car.ⓘ Axle Speed over Roadway [V_Roadway]			+10% -10%
✖Slip Angle is the angle between the direction of the tire's motion and the direction of the force it is experiencing on the road surface.ⓘ Slip Angle [α_slip]			+10% -10%

✖Lateral Slip Velocity is the speed at which a tire loses traction and slides sideways, affecting the racing car's stability and handling performance.ⓘ Lateral Slip Velocity [v_lateral]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Tire Rolling and Slipping Formulas PDF PDF Image

Lateral Slip Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Lateral Slip Velocity = Axle Speed over Roadway*sin(Slip Angle)
v_lateral = V_Roadway*sin(α_slip)
This formula uses 1 Functions, 3 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Lateral Slip Velocity - (Measured in Meter per Second) - Lateral Slip Velocity is the speed at which a tire loses traction and slides sideways, affecting the racing car's stability and handling performance.
Axle Speed over Roadway - (Measured in Meter per Second) - Axle Speed over Roadway is the speed of the axle in relation to the roadway, influencing the tire behavior and overall performance of a racing car.
Slip Angle - (Measured in Radian) - Slip Angle is the angle between the direction of the tire's motion and the direction of the force it is experiencing on the road surface.

STEP 1: Convert Input(s) to Base Unit

Axle Speed over Roadway: 30 Meter per Second --> 30 Meter per Second No Conversion Required
Slip Angle: 0.087 Radian --> 0.087 Radian No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_lateral = V_Roadway*sin(α_slip) --> 30*sin(0.087)

Evaluating ... ...

v_lateral = 2.60670873082777

STEP 3: Convert Result to Output's Unit

2.60670873082777 Meter per Second --> No Conversion Required

FINAL ANSWER

2.60670873082777 ≈ 2.606709 Meter per Second <-- Lateral Slip Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Automobile » Race Car Vehicle Dynamics » Tire Behavior in Racing Car » Mechanical » Tire Rolling and Slipping » Lateral Slip Velocity

Credits

Created by Peri Krishna Karthik

National Institute of Technology Calicut (NIT Calicut), Calicut, Kerala

Peri Krishna Karthik has created this Calculator and 200+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Tire Rolling and Slipping Calculators

Gradient Resistance of Vehicle

LaTeX Go Gradient Resistance = Vehicle Weight in Newtons*Acceleration due to Gravity*sin(Angle of Inclination of Ground from Horizontal)

Rolling Resistance Coefficient

LaTeX Go Rolling Resistance Coefficient = Distance of Opposing Torque from Vertical/Effective Wheel Radius

Rolling Resistance at Wheels

LaTeX Go Rolling Resistance at Wheel = Normal Load on Wheels*Rolling Resistance Coefficient

Rolling Radius of Tire

LaTeX Go Rolling Radius of Tire = 2/3*Geometrical Radius of Tire+1/3*Loaded Height of Tire

Lateral Slip Velocity Formula

LaTeX Go

Lateral Slip Velocity = Axle Speed over Roadway*sin(Slip Angle)
v_lateral = V_Roadway*sin(α_slip)

What is Slip Angle?

Slip angle also known as sideslip angle is the angle between the direction in which a wheel is pointing and the direction in which it is actually traveling. This slip angle results in a force, the cornering force, which is in the plane of the contact patch and perpendicular to the intersection of the contact patch and the midplane of the wheel. This cornering force increases approximately linearly for the first few degrees of slip angle, then increases non-linearly to a maximum before beginning to decrease.

How to Calculate Lateral Slip Velocity?

Lateral Slip Velocity calculator uses Lateral Slip Velocity = Axle Speed over Roadway*sin(Slip Angle) to calculate the Lateral Slip Velocity, Lateral Slip Velocity formula is defined as a measure of the velocity at which a vehicle's tires move sideways, perpendicular to their direction of travel, due to a loss of traction or skidding, which is a critical factor in understanding vehicle dynamics and stability. Lateral Slip Velocity is denoted by v_lateral symbol.

How to calculate Lateral Slip Velocity using this online calculator? To use this online calculator for Lateral Slip Velocity, enter Axle Speed over Roadway (V_Roadway) & Slip Angle (α_slip) and hit the calculate button. Here is how the Lateral Slip Velocity calculation can be explained with given input values -> 2.606709 = 30*sin(0.087).

FAQ

What is Lateral Slip Velocity?

Lateral Slip Velocity formula is defined as a measure of the velocity at which a vehicle's tires move sideways, perpendicular to their direction of travel, due to a loss of traction or skidding, which is a critical factor in understanding vehicle dynamics and stability and is represented as v_lateral = V_Roadway*sin(α_slip) or Lateral Slip Velocity = Axle Speed over Roadway*sin(Slip Angle). Axle Speed over Roadway is the speed of the axle in relation to the roadway, influencing the tire behavior and overall performance of a racing car & Slip Angle is the angle between the direction of the tire's motion and the direction of the force it is experiencing on the road surface.

How to calculate Lateral Slip Velocity?

Lateral Slip Velocity formula is defined as a measure of the velocity at which a vehicle's tires move sideways, perpendicular to their direction of travel, due to a loss of traction or skidding, which is a critical factor in understanding vehicle dynamics and stability is calculated using Lateral Slip Velocity = Axle Speed over Roadway*sin(Slip Angle). To calculate Lateral Slip Velocity, you need Axle Speed over Roadway (V_Roadway) & Slip Angle (α_slip). With our tool, you need to enter the respective value for Axle Speed over Roadway & Slip Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search