Keulegan Repletion Coefficient Calculator

✖King’s 1st Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.ⓘ King’s 1st Inlet Friction Coefficient [K₂]			+10% -10%
✖King’s Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.ⓘ King’s Inlet Friction Coefficient [K₁]			+10% -10%

✖Keulegan Repletion Coefficient [dimensionless] is mainly dependent on the King’s Inlet Friction Coefficient.ⓘ Keulegan Repletion Coefficient [K]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Inlet Currents and Tidal Elevations Formulas PDF PDF Image

Keulegan Repletion Coefficient Solution

STEP 0: Pre-Calculation Summary

Formula Used

Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient)
K = 1/K₂*sqrt(1/K₁)
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Keulegan Repletion Coefficient [dimensionless] - Keulegan Repletion Coefficient [dimensionless] is mainly dependent on the King’s Inlet Friction Coefficient.
King’s 1st Inlet Friction Coefficient - King’s 1st Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.
King’s Inlet Friction Coefficient - King’s Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.

STEP 1: Convert Input(s) to Base Unit

King’s 1st Inlet Friction Coefficient: 0.25 --> No Conversion Required
King’s Inlet Friction Coefficient: 28.8 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K = 1/K₂*sqrt(1/K₁) --> 1/0.25*sqrt(1/28.8)

Evaluating ... ...

K = 0.74535599249993

STEP 3: Convert Result to Output's Unit

0.74535599249993 --> No Conversion Required

FINAL ANSWER

0.74535599249993 ≈ 0.745356 <-- Keulegan Repletion Coefficient [dimensionless]

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Hydrodynamics of Tidal Inlets 1 » Inlet Hydrodynamics » Inlet Currents and Tidal Elevations » Keulegan Repletion Coefficient

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Inlet Currents and Tidal Elevations Calculators

Change of Bay Elevation with Time for Flow through Inlet into Bay

LaTeX Go Change of Bay Elevation with Time = (Average Area over the Channel Length*Average Velocity in Channel for Flow)/Surface Area of Bay

Average Area over Channel Length for Flow through Inlet into Bay

LaTeX Go Average Area over the Channel Length = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Velocity in Channel for Flow

Average Velocity in Channel for Flow through Inlet into Bay

LaTeX Go Average Velocity in Channel for Flow = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Area over the Channel Length

Surface Area of Bay for Flow through Inlet into Bay

LaTeX Go Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time

Keulegan Repletion Coefficient Formula

LaTeX Go

Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient)
K = 1/K₂*sqrt(1/K₁)

What is Inlet flow patterns?

An Inlet has a "gorge" where flows converge before they expand again on the opposite side. Shoal (shallow) areas that extend bayward and oceanward from the gorge depend on inlet hydraulics, wave conditions, and general geomorphology. All these interact to determine flow patterns in and around the inlet and locations where flow channels occur.

How to Calculate Keulegan Repletion Coefficient?

Keulegan Repletion Coefficient calculator uses Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient) to calculate the Keulegan Repletion Coefficient [dimensionless], The Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K. Keulegan Repletion Coefficient [dimensionless] is denoted by K symbol.

How to calculate Keulegan Repletion Coefficient using this online calculator? To use this online calculator for Keulegan Repletion Coefficient, enter King’s 1st Inlet Friction Coefficient (K₂) & King’s Inlet Friction Coefficient (K₁) and hit the calculate button. Here is how the Keulegan Repletion Coefficient calculation can be explained with given input values -> 0.745356 = 1/0.25*sqrt(1/28.8).

FAQ

What is Keulegan Repletion Coefficient?

The Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K and is represented as K = 1/K₂*sqrt(1/K₁) or Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient). King’s 1st Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force & King’s Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.

How to calculate Keulegan Repletion Coefficient?

The Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K is calculated using Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient). To calculate Keulegan Repletion Coefficient, you need King’s 1st Inlet Friction Coefficient (K₂) & King’s Inlet Friction Coefficient (K₁). With our tool, you need to enter the respective value for King’s 1st Inlet Friction Coefficient & King’s Inlet Friction Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search