Intercept on Rod between Two Sighting Wires Calculator

✖Stadia distance from instrument spindle to rod.ⓘ Stadia Distance [D_s]			+10% -10%
✖Focal Length of Telescope is measured as the distance from the main optic to the point where the image is formed.ⓘ Focal Length of Telescope [f]			+10% -10%
✖Rod Intercept gives the reading from the rod.ⓘ Rod Intercept [R_i]			+10% -10%
✖Stadia Constant is an integer ratio between the difference of the rod readings and the distance from the telescope to the rod.ⓘ Stadia Constant [C]			+10% -10%

✖Intercept on rod between two sighting wires.ⓘ Intercept on Rod between Two Sighting Wires [R]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Photogrammetry Stadia and Compass Surveying Formulas PDF PDF Image

Intercept on Rod between Two Sighting Wires Solution

STEP 0: Pre-Calculation Summary

Formula Used

Intercept on Rod = Stadia Distance/((Focal Length of Telescope/Rod Intercept)+Stadia Constant)
R = D_s/((f/R_i)+C)
This formula uses 5 Variables

Variables Used

Intercept on Rod - (Measured in Meter) - Intercept on rod between two sighting wires.
Stadia Distance - (Measured in Meter) - Stadia distance from instrument spindle to rod.
Focal Length of Telescope - (Measured in Meter) - Focal Length of Telescope is measured as the distance from the main optic to the point where the image is formed.
Rod Intercept - (Measured in Meter) - Rod Intercept gives the reading from the rod.
Stadia Constant - (Measured in Meter) - Stadia Constant is an integer ratio between the difference of the rod readings and the distance from the telescope to the rod.

STEP 1: Convert Input(s) to Base Unit

Stadia Distance: 64 Meter --> 64 Meter No Conversion Required
Focal Length of Telescope: 2 Meter --> 2 Meter No Conversion Required
Rod Intercept: 3.2 Meter --> 3.2 Meter No Conversion Required
Stadia Constant: 10 Meter --> 10 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R = D_s/((f/R_i)+C) --> 64/((2/3.2)+10)

Evaluating ... ...

R = 6.02352941176471

STEP 3: Convert Result to Output's Unit

6.02352941176471 Meter --> No Conversion Required

FINAL ANSWER

6.02352941176471 ≈ 6.023529 Meter <-- Intercept on Rod

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Photogrammetry Stadia and Compass Surveying » Stadia Surveying » Intercept on Rod between Two Sighting Wires

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< Stadia Surveying Calculators

Vertical Distance between Center of Transit and Rod Intersected by Middle Horizontal Crosshair

LaTeX Go Vertical Distance = 1/(2*((Stadia Factor*Rod Intercept*sin(2*Vertical Inclination of Line of Sight))+(Instrument Constant*sin(Vertical Inclination of Line of Sight))))

Horizontal Distance between Center of Transit and Rod

LaTeX Go Horizontal Distance = (Stadia Factor*Rod Intercept*(cos(Vertical Inclination of Line of Sight))^2)+(Instrument Constant*cos(Vertical Inclination of Line of Sight))

Stadia Distance from Instrument Spindle to Rod

LaTeX Go Stadia Distance = Intercept on Rod*((Focal Length of Telescope/Rod Intercept)+Stadia Constant)

Additive Constant or Stadia Constant

LaTeX Go Stadia Constant = (Focal Length of Telescope+Distance from Center)

Intercept on Rod between Two Sighting Wires Formula

LaTeX Go

Intercept on Rod = Stadia Distance/((Focal Length of Telescope/Rod Intercept)+Stadia Constant)
R = D_s/((f/R_i)+C)

What is Stadia Rod?

An ordinary levelling staff can be used if the sights are short but in tacheometry since the sights are usually of much greater length, therefore, an ordinary levelling staff cannot serve the purpose. But a specially designed graduated rod known as stadia rod is used.

What is Tacheometry?

Tacheometry is a branch of surveying in which the horizontal and vertical distances are determined by angular observations with a tacheometer, the chaining operation being altogether eliminated Tacheometry is not as accurate as is changing, but it is far more rapid in rough and difficult country where levelling is tedious and chaining is both inaccurate and slow.

How to Calculate Intercept on Rod between Two Sighting Wires?

Intercept on Rod between Two Sighting Wires calculator uses Intercept on Rod = Stadia Distance/((Focal Length of Telescope/Rod Intercept)+Stadia Constant) to calculate the Intercept on Rod, The Intercept on Rod between Two Sighting Wires formula is defined as the reading which we get from the tacheometer on the stadia rod. Intercept on Rod is denoted by R symbol.

How to calculate Intercept on Rod between Two Sighting Wires using this online calculator? To use this online calculator for Intercept on Rod between Two Sighting Wires, enter Stadia Distance (D_s), Focal Length of Telescope (f), Rod Intercept (R_i) & Stadia Constant (C) and hit the calculate button. Here is how the Intercept on Rod between Two Sighting Wires calculation can be explained with given input values -> 6.023529 = 64/((2/3.2)+10).

FAQ

What is Intercept on Rod between Two Sighting Wires?

The Intercept on Rod between Two Sighting Wires formula is defined as the reading which we get from the tacheometer on the stadia rod and is represented as R = D_s/((f/R_i)+C) or Intercept on Rod = Stadia Distance/((Focal Length of Telescope/Rod Intercept)+Stadia Constant). Stadia distance from instrument spindle to rod, Focal Length of Telescope is measured as the distance from the main optic to the point where the image is formed, Rod Intercept gives the reading from the rod & Stadia Constant is an integer ratio between the difference of the rod readings and the distance from the telescope to the rod.

How to calculate Intercept on Rod between Two Sighting Wires?

The Intercept on Rod between Two Sighting Wires formula is defined as the reading which we get from the tacheometer on the stadia rod is calculated using Intercept on Rod = Stadia Distance/((Focal Length of Telescope/Rod Intercept)+Stadia Constant). To calculate Intercept on Rod between Two Sighting Wires, you need Stadia Distance (D_s), Focal Length of Telescope (f), Rod Intercept (R_i) & Stadia Constant (C). With our tool, you need to enter the respective value for Stadia Distance, Focal Length of Telescope, Rod Intercept & Stadia Constant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search