Inside Diameter given Full Flow Velocity in Sewer Calculator

✖The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section.ⓘ Flow Velocity [V_f]			+10% -10%
✖The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows.ⓘ Roughness Coefficient of Conduit Surface [n_c]			+10% -10%
✖The Energy Loss refers to the dissipation or reduction of energy within a system or process.ⓘ Energy Loss [S]			+10% -10%

✖The Inner Diameter refers to the diameter of the inner surface or bore of a cylindrical object or conduit.ⓘ Inside Diameter given Full Flow Velocity in Sewer [d_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Velocity in Straight Sewers Formulas PDF PDF Image

Inside Diameter given Full Flow Velocity in Sewer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2)
d_i = ((V_f*n_c)/(0.59*S^(1/2)))^(3/2)
This formula uses 4 Variables

Variables Used

Inner Diameter - (Measured in Meter) - The Inner Diameter refers to the diameter of the inner surface or bore of a cylindrical object or conduit.
Flow Velocity - (Measured in Meter per Second) - The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section.
Roughness Coefficient of Conduit Surface - The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows.
Energy Loss - (Measured in Joule) - The Energy Loss refers to the dissipation or reduction of energy within a system or process.

STEP 1: Convert Input(s) to Base Unit

Flow Velocity: 1.12 Meter per Second --> 1.12 Meter per Second No Conversion Required
Roughness Coefficient of Conduit Surface: 0.017 --> No Conversion Required
Energy Loss: 2 Joule --> 2 Joule No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_i = ((V_f*n_c)/(0.59*S^(1/2)))^(3/2) --> ((1.12*0.017)/(0.59*2^(1/2)))^(3/2)

Evaluating ... ...

d_i = 0.00344706840543765

STEP 3: Convert Result to Output's Unit

0.00344706840543765 Meter --> No Conversion Required

FINAL ANSWER

0.00344706840543765 ≈ 0.003447 Meter <-- Inner Diameter

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Flow Velocity in Straight Sewers » Required Flow Velocity » Inside Diameter given Full Flow Velocity in Sewer

Credits

Created by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has created this Calculator and 200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Required Flow Velocity Calculators

Inside Diameter given Full Flow Velocity in Sewer

LaTeX Go Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2)

Coefficient of Roughness given Full Flow Velocity in Sewer

LaTeX Go Roughness Coefficient of Conduit Surface = (0.59*Inner Diameter^(2/3)*Energy Loss^(1/2))/Flow Velocity

Energy Loss given Full Flow Velocity in Sewer

LaTeX Go Energy Loss = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Inner Diameter^(2/3)))^2

Full flow velocity in sewer

LaTeX Go Flow Velocity = (0.59*Inner Diameter^(2/3)*Energy Loss^(1/2))/Roughness Coefficient of Conduit Surface

Inside Diameter given Full Flow Velocity in Sewer Formula

LaTeX Go

Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2)
d_i = ((V_f*n_c)/(0.59*S^(1/2)))^(3/2)

What is pipe roughness coefficient?

Roughness coefficient is a value used in Manning's formula to determine energy losses of flowing water due to pipe or channel wall roughness. It is based on the material of the pipe. New steel pipe uses a C value of 140, but with use and corrosion, a lower value is typically used. For HDPE pipe, a range of C values between 150 and 160 is typical.

How to Calculate Inside Diameter given Full Flow Velocity in Sewer?

Inside Diameter given Full Flow Velocity in Sewer calculator uses Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2) to calculate the Inner Diameter, The Inside diameter given full flow velocity in sewer formula calculates the inner diameter of the pipe when we have a prior info of the roughness coefficient , flow velocity and energy loss. Inner Diameter is denoted by d_i symbol.

How to calculate Inside Diameter given Full Flow Velocity in Sewer using this online calculator? To use this online calculator for Inside Diameter given Full Flow Velocity in Sewer, enter Flow Velocity (V_f), Roughness Coefficient of Conduit Surface (n_c) & Energy Loss (S) and hit the calculate button. Here is how the Inside Diameter given Full Flow Velocity in Sewer calculation can be explained with given input values -> 0.003447 = ((1.12*0.017)/(0.59*2^(1/2)))^(3/2).

FAQ

What is Inside Diameter given Full Flow Velocity in Sewer?

The Inside diameter given full flow velocity in sewer formula calculates the inner diameter of the pipe when we have a prior info of the roughness coefficient , flow velocity and energy loss and is represented as d_i = ((V_f*n_c)/(0.59*S^(1/2)))^(3/2) or Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2). The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section, The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows & The Energy Loss refers to the dissipation or reduction of energy within a system or process.

How to calculate Inside Diameter given Full Flow Velocity in Sewer?

The Inside diameter given full flow velocity in sewer formula calculates the inner diameter of the pipe when we have a prior info of the roughness coefficient , flow velocity and energy loss is calculated using Inner Diameter = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(0.59*Energy Loss^(1/2)))^(3/2). To calculate Inside Diameter given Full Flow Velocity in Sewer, you need Flow Velocity (V_f), Roughness Coefficient of Conduit Surface (n_c) & Energy Loss (S). With our tool, you need to enter the respective value for Flow Velocity, Roughness Coefficient of Conduit Surface & Energy Loss and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Inner Diameter?

In this formula, Inner Diameter uses Flow Velocity, Roughness Coefficient of Conduit Surface & Energy Loss. We can use 1 other way(s) to calculate the same, which is/are as follows -

Inner Diameter = ((Water Flow*Roughness Coefficient of Conduit Surface)/(0.463*Energy Loss^(1/2)))^(3/8)

Home

FREE PDFs

🔍 Search