Input Transfer Impedance (Z12) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Z12 Parameter = Voltage Port 1/Current in Port 2
Z12 = V1/I2
This formula uses 3 Variables
Variables Used
Z12 Parameter - (Measured in Ohm) - Z12 Parameter is reverse transfer impedance.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
Current in Port 2 - (Measured in Ampere) - Current in port 2 is the magnitude of current flowing through port 2.
STEP 1: Convert Input(s) to Base Unit
Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
Current in Port 2: 1.02 Ampere --> 1.02 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Z12 = V1/I2 --> 440/1.02
Evaluating ... ...
Z12 = 431.372549019608
STEP 3: Convert Result to Output's Unit
431.372549019608 Ohm --> No Conversion Required
FINAL ANSWER
431.372549019608 431.3725 Ohm <-- Z12 Parameter
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

Z Parameters Calculators

Current 2 given Voltage 2 (Z Parameter)
​ LaTeX ​ Go Current in Port 2 = (Voltage Port 2-(Z21 Parameter*Current in Port 1))/Z22 Parameter
Current 2 given Voltage 1 (Z Parameter)
​ LaTeX ​ Go Current in Port 2 = (Voltage Port 1-(Z11 Parameter*Current in Port 1))/Z12 Parameter
Voltage 1 (Z Parameter)
​ LaTeX ​ Go Voltage Port 1 = (Z11 Parameter*Current in Port 1)+(Z12 Parameter+Current in Port 2)
Voltage 2 (Z Parameter)
​ LaTeX ​ Go Voltage Port 2 = (Z21 Parameter*Current in Port 1)+(Z22 Parameter+Current in Port 2)

Two Port Parameters Calculators

Driving Point Output Impedance (Z22)
​ LaTeX ​ Go Z22 Parameter = Voltage Port 2/Current in Port 2
Driving Point Input Impedance (Z11)
​ LaTeX ​ Go Z11 Parameter = Voltage Port 1/Current in Port 1
Output Transfer Impedance (Z21)
​ LaTeX ​ Go Z21 Parameter = Voltage Port 2/Current in Port 1
Input Transfer Impedance (Z12)
​ LaTeX ​ Go Z12 Parameter = Voltage Port 1/Current in Port 2

Input Transfer Impedance (Z12) Formula

​LaTeX ​Go
Z12 Parameter = Voltage Port 1/Current in Port 2
Z12 = V1/I2

What is Z parameter in two port network?

Z parameters (also known as impedance parameters or open-circuit parameters) are properties used in electrical engineering to describe the electrical behavior of linear electrical networks.

How to Calculate Input Transfer Impedance (Z12)?

Input Transfer Impedance (Z12) calculator uses Z12 Parameter = Voltage Port 1/Current in Port 2 to calculate the Z12 Parameter, Input Transfer Impedance (Z12) formula is defined as forwarding transfer impedance also known as impedance parameters or open-circuit parameters. Z12 Parameter is denoted by Z12 symbol.

How to calculate Input Transfer Impedance (Z12) using this online calculator? To use this online calculator for Input Transfer Impedance (Z12), enter Voltage Port 1 (V1) & Current in Port 2 (I2) and hit the calculate button. Here is how the Input Transfer Impedance (Z12) calculation can be explained with given input values -> 431.3725 = 440/1.02.

FAQ

What is Input Transfer Impedance (Z12)?
Input Transfer Impedance (Z12) formula is defined as forwarding transfer impedance also known as impedance parameters or open-circuit parameters and is represented as Z12 = V1/I2 or Z12 Parameter = Voltage Port 1/Current in Port 2. Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light & Current in port 2 is the magnitude of current flowing through port 2.
How to calculate Input Transfer Impedance (Z12)?
Input Transfer Impedance (Z12) formula is defined as forwarding transfer impedance also known as impedance parameters or open-circuit parameters is calculated using Z12 Parameter = Voltage Port 1/Current in Port 2. To calculate Input Transfer Impedance (Z12), you need Voltage Port 1 (V1) & Current in Port 2 (I2). With our tool, you need to enter the respective value for Voltage Port 1 & Current in Port 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Z12 Parameter?
In this formula, Z12 Parameter uses Voltage Port 1 & Current in Port 2. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Z12 Parameter = (Voltage Port 1-(Z11 Parameter*Current in Port 1))/Current in Port 2
  • Z12 Parameter = 1/C Inverse Parameter
  • Z12 Parameter = H12 Parameter/H22 Parameter
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!