Input Clock Phase PLL Calculator

✖PLL Output Clock Phase is a clock signal that oscillates between a high and a low state and is used like a metronome to coordinate actions of digital circuits.ⓘ PLL Output Clock Phase [Φ_out]			+10% -10%
✖Transfer function PLL is defined as the output phase clock to the ratio of input reference clock.ⓘ Transfer Function PLL [H_s]			+10% -10%

✖Input reference clock phase is defined as a logic transition, which when applied to a clock pin on a synchronous element, captures data.ⓘ Input Clock Phase PLL [ΔΦ_in]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download CMOS Special Purpose Subsystem Formulas PDF PDF Image

Input Clock Phase PLL Solution

STEP 0: Pre-Calculation Summary

Formula Used

Input Reference Clock Phase = PLL Output Clock Phase/Transfer Function PLL
ΔΦ_in = Φ_out/H_s
This formula uses 3 Variables

Variables Used

Input Reference Clock Phase - Input reference clock phase is defined as a logic transition, which when applied to a clock pin on a synchronous element, captures data.
PLL Output Clock Phase - PLL Output Clock Phase is a clock signal that oscillates between a high and a low state and is used like a metronome to coordinate actions of digital circuits.
Transfer Function PLL - Transfer function PLL is defined as the output phase clock to the ratio of input reference clock.

STEP 1: Convert Input(s) to Base Unit

PLL Output Clock Phase: 29.89 --> No Conversion Required
Transfer Function PLL: 4.99 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ΔΦ_in = Φ_out/H_s --> 29.89/4.99

Evaluating ... ...

ΔΦ_in = 5.98997995991984

STEP 3: Convert Result to Output's Unit

5.98997995991984 --> No Conversion Required

FINAL ANSWER

5.98997995991984 ≈ 5.98998 <-- Input Reference Clock Phase

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Electronics » CMOS Design and Applications » CMOS Special Purpose Subsystem » Input Clock Phase PLL

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< CMOS Special Purpose Subsystem Calculators

Capacitance of External Load

LaTeX Go Capacitance of External Load = Fanout*Input Capacitance

Fanout of Gate

LaTeX Go Fanout = Stage Effort/Logical Effort

Stage Effort

LaTeX Go Stage Effort = Fanout*Logical Effort

Gate Delay

LaTeX Go Gate Delay = 2^(N Bit SRAM)

Input Clock Phase PLL Formula

LaTeX Go

Input Reference Clock Phase = PLL Output Clock Phase/Transfer Function PLL
ΔΦ_in = Φ_out/H_s

What is Transfer Function?

A Transfer Function is the ratio of the output of a system to the input of a system, in the Laplace domain considering its initial conditions and equilibrium point to be zero.

How to Calculate Input Clock Phase PLL?

Input Clock Phase PLL calculator uses Input Reference Clock Phase = PLL Output Clock Phase/Transfer Function PLL to calculate the Input Reference Clock Phase, The input clock phase PLL formula is defined as a logic transition, which when applied to a clock pin on a synchronous element, captures data. It starts at either an input or an output of the chip but can also start at other sequential elements. Input Reference Clock Phase is denoted by ΔΦ_in symbol.

How to calculate Input Clock Phase PLL using this online calculator? To use this online calculator for Input Clock Phase PLL, enter PLL Output Clock Phase (Φ_out) & Transfer Function PLL (H_s) and hit the calculate button. Here is how the Input Clock Phase PLL calculation can be explained with given input values -> 5.991984 = 29.89/4.99.

FAQ

What is Input Clock Phase PLL?

The input clock phase PLL formula is defined as a logic transition, which when applied to a clock pin on a synchronous element, captures data. It starts at either an input or an output of the chip but can also start at other sequential elements and is represented as ΔΦ_in = Φ_out/H_s or Input Reference Clock Phase = PLL Output Clock Phase/Transfer Function PLL. PLL Output Clock Phase is a clock signal that oscillates between a high and a low state and is used like a metronome to coordinate actions of digital circuits & Transfer function PLL is defined as the output phase clock to the ratio of input reference clock.

How to calculate Input Clock Phase PLL?

The input clock phase PLL formula is defined as a logic transition, which when applied to a clock pin on a synchronous element, captures data. It starts at either an input or an output of the chip but can also start at other sequential elements is calculated using Input Reference Clock Phase = PLL Output Clock Phase/Transfer Function PLL. To calculate Input Clock Phase PLL, you need PLL Output Clock Phase (Φ_out) & Transfer Function PLL (H_s). With our tool, you need to enter the respective value for PLL Output Clock Phase & Transfer Function PLL and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search