Input Capacitance of STC Circuit Calculator

✖Total Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential.ⓘ Total Capacitance [C_t]			+10% -10%
✖Gate to source capacitance is capacitance between them.ⓘ Gate to Source Capacitance [C_gs]			+10% -10%

✖Input Capacitance of STC(Single Time Constant Circuit) is the calculated capacitance which is being given to the circuit.ⓘ Input Capacitance of STC Circuit [C_stc]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Amplifier Functions and Network Formulas PDF PDF Image

Input Capacitance of STC Circuit Solution

STEP 0: Pre-Calculation Summary

Formula Used

Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance
C_stc = C_t+C_gs
This formula uses 3 Variables

Variables Used

Input Capacitance of STC - (Measured in Farad) - Input Capacitance of STC(Single Time Constant Circuit) is the calculated capacitance which is being given to the circuit.
Total Capacitance - (Measured in Farad) - Total Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential.
Gate to Source Capacitance - (Measured in Farad) - Gate to source capacitance is capacitance between them.

STEP 1: Convert Input(s) to Base Unit

Total Capacitance: 4 Microfarad --> 4E-06 Farad (Check conversion here)
Gate to Source Capacitance: 1.7 Microfarad --> 1.7E-06 Farad (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_stc = C_t+C_gs --> 4E-06+1.7E-06

Evaluating ... ...

C_stc = 5.7E-06

STEP 3: Convert Result to Output's Unit

5.7E-06 Farad -->5.7 Microfarad (Check conversion here)

FINAL ANSWER

5.7 Microfarad <-- Input Capacitance of STC

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Amplifier Functions and Network » STC Network » Input Capacitance of STC Circuit

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< STC Network Calculators

Input Capacitance of STC Circuit

LaTeX Go Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance

Input Capacitance with reference to Corner Frequency

LaTeX Go Input Capacitance = 1/(Pole Frequency of STC Filter*Signal Resistance)

Pole Frequency of STC Circuit

LaTeX Go Pole Frequency of STC Filter = 1/(Input Capacitance*Signal Resistance)

Pole Frequency of STC Networks for Low-Pass

LaTeX Go Pole Frequency Low Pass = 1/Time Constant

Input Capacitance of STC Circuit Formula

LaTeX Go

Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance
C_stc = C_t+C_gs

What causes the Miller effect?

The Miller effect is a basic electronic phenomenon associated with feedback circuits. It can occur undesirably in amplifiers, caused by parasitic capacitance, but it can also be applied in capacitance and resistance multiplier circuits.

How to Calculate Input Capacitance of STC Circuit?

Input Capacitance of STC Circuit calculator uses Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance to calculate the Input Capacitance of STC, Input Capacitance of STC Circuit formula is defined as the capacitance between the input terminals of an op-amp with either input grounded. Input Capacitance of STC is denoted by C_stc symbol.

How to calculate Input Capacitance of STC Circuit using this online calculator? To use this online calculator for Input Capacitance of STC Circuit, enter Total Capacitance (C_t) & Gate to Source Capacitance (C_gs) and hit the calculate button. Here is how the Input Capacitance of STC Circuit calculation can be explained with given input values -> 5.7E+6 = 4E-06+1.7E-06.

FAQ

What is Input Capacitance of STC Circuit?

Input Capacitance of STC Circuit formula is defined as the capacitance between the input terminals of an op-amp with either input grounded and is represented as C_stc = C_t+C_gs or Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance. Total Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential & Gate to source capacitance is capacitance between them.

How to calculate Input Capacitance of STC Circuit?

Input Capacitance of STC Circuit formula is defined as the capacitance between the input terminals of an op-amp with either input grounded is calculated using Input Capacitance of STC = Total Capacitance+Gate to Source Capacitance. To calculate Input Capacitance of STC Circuit, you need Total Capacitance (C_t) & Gate to Source Capacitance (C_gs). With our tool, you need to enter the respective value for Total Capacitance & Gate to Source Capacitance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search