Initial Temperature of Body by Lumped Heat Capacity Method Calculator

✖Temperature at Any Time T is defined as the temperature of an object at any given time t measured using thermometer.ⓘ Temperature at Any Time T [T]			+10% -10%
✖Temperature of Bulk Fluid is defined as the temperature of bulk fluid or fluid at given instant measured using thermometer.ⓘ Temperature of Bulk Fluid [T_∞]			+10% -10%
✖The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place.ⓘ Heat Transfer Coefficient [h]			+10% -10%
✖Surface Area for Convection is defined as the surface area of object which is in the process of heat transfer.ⓘ Surface Area for Convection [A_c]			+10% -10%
✖Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature.ⓘ Time Constant [𝜏]			+10% -10%
✖Density of Body is the physical quantity that expresses the relationship between its mass and its volume.ⓘ Density of Body [ρ_B]			+10% -10%
✖Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.ⓘ Specific Heat Capacity [c]			+10% -10%
✖Volume of Object is the amount of space that a substance or object occupies or that is enclosed within a container.ⓘ Volume of Object [V]			+10% -10%

✖The Initial temperature of Object is defined as the measure of heat under initial state or conditions.ⓘ Initial Temperature of Body by Lumped Heat Capacity Method [T₀]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unsteady State Heat Conduction Formulas PDF PDF Image

Initial Temperature of Body by Lumped Heat Capacity Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Temperature of Object = (Temperature at Any Time T-Temperature of Bulk Fluid)/(exp((-Heat Transfer Coefficient*Surface Area for Convection*Time Constant)/(Density of Body*Specific Heat Capacity*Volume of Object)))+Temperature of Bulk Fluid
T₀ = (T-T_∞)/(exp((-h*A_c*𝜏)/(ρ_B*c*V)))+T_∞
This formula uses 1 Functions, 9 Variables

Functions Used

exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)

Variables Used

Initial Temperature of Object - (Measured in Kelvin) - The Initial temperature of Object is defined as the measure of heat under initial state or conditions.
Temperature at Any Time T - (Measured in Kelvin) - Temperature at Any Time T is defined as the temperature of an object at any given time t measured using thermometer.
Temperature of Bulk Fluid - (Measured in Kelvin) - Temperature of Bulk Fluid is defined as the temperature of bulk fluid or fluid at given instant measured using thermometer.
Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place.
Surface Area for Convection - (Measured in Square Meter) - Surface Area for Convection is defined as the surface area of object which is in the process of heat transfer.
Time Constant - (Measured in Second) - Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature.
Density of Body - (Measured in Kilogram per Cubic Meter) - Density of Body is the physical quantity that expresses the relationship between its mass and its volume.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Volume of Object - (Measured in Cubic Meter) - Volume of Object is the amount of space that a substance or object occupies or that is enclosed within a container.

STEP 1: Convert Input(s) to Base Unit

Temperature at Any Time T: 589 Kelvin --> 589 Kelvin No Conversion Required
Temperature of Bulk Fluid: 373 Kelvin --> 373 Kelvin No Conversion Required
Heat Transfer Coefficient: 10 Watt per Square Meter per Kelvin --> 10 Watt per Square Meter per Kelvin No Conversion Required
Surface Area for Convection: 0.00785 Square Meter --> 0.00785 Square Meter No Conversion Required
Time Constant: 1937 Second --> 1937 Second No Conversion Required
Density of Body: 15 Kilogram per Cubic Meter --> 15 Kilogram per Cubic Meter No Conversion Required
Specific Heat Capacity: 1.5 Joule per Kilogram per K --> 1.5 Joule per Kilogram per K No Conversion Required
Volume of Object: 6.541 Cubic Meter --> 6.541 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T₀ = (T-T_∞)/(exp((-h*A_c*𝜏)/(ρ_B*c*V)))+T_∞ --> (589-373)/(exp((-10*0.00785*1937)/(15*1.5*6.541)))+373

Evaluating ... ...

T₀ = 979.952397710188

STEP 3: Convert Result to Output's Unit

979.952397710188 Kelvin --> No Conversion Required

FINAL ANSWER

979.952397710188 ≈ 979.9524 Kelvin <-- Initial Temperature of Object

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Unsteady State Heat Conduction » Initial Temperature of Body by Lumped Heat Capacity Method

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Unsteady State Heat Conduction Calculators

Fourier Number using Biot Number

LaTeX Go Fourier Number = (-1/(Biot Number))*ln((Temperature at Any Time T-Temperature of Bulk Fluid)/(Initial Temperature of Object-Temperature of Bulk Fluid))

Biot Number using Fourier Number

LaTeX Go Biot Number = (-1/Fourier Number)*ln((Temperature at Any Time T-Temperature of Bulk Fluid)/(Initial Temperature of Object-Temperature of Bulk Fluid))

Initial Internal Energy Content of Body in Reference to Environment Temperature

LaTeX Go Initial Energy Content = Density of Body*Specific Heat Capacity*Volume of Object*(Initial Temperature of Solid-Ambient Temperature)

Biot Number using Heat Transfer Coefficient

LaTeX Go Biot Number = (Heat Transfer Coefficient*Thickness of Wall)/Thermal Conductivity

Initial Temperature of Body by Lumped Heat Capacity Method Formula

LaTeX Go

What is Unsteady State Heat Transfer?

Unsteady State Heat Transfer refers to the heat transfer process in which a system's temperature changes with time. This type of heat transfer can happen in different forms, such as conduction, convection, and radiation. It occurs in various systems, including solid materials, fluids, and gases. The heat transfer rate in an unsteady state is directly proportional to the rate of temperature change. This means that the heat transfer rate is not constant and can vary over time. It's an important aspect in the design and optimization of thermal systems, and understanding this process is crucial in many research areas, such as combustion, electronics, and aerospace.

What is Lumped Parameter Model?

Interior temperatures of some bodies remain essentially uniform at all times during a heat transfer process. The temperature of such bodies are only a function of time, T = T(t). The heat transfer analysis based on this idealization is called lumped system analysis.

How to Calculate Initial Temperature of Body by Lumped Heat Capacity Method?

Initial Temperature of Body by Lumped Heat Capacity Method calculator uses Initial Temperature of Object = (Temperature at Any Time T-Temperature of Bulk Fluid)/(exp((-Heat Transfer Coefficient*Surface Area for Convection*Time Constant)/(Density of Body*Specific Heat Capacity*Volume of Object)))+Temperature of Bulk Fluid to calculate the Initial Temperature of Object, The Initial Temperature of Body by Lumped Heat Capacity Method formula is defined as the function of heat transfer coefficient, surface area of convection, density of object, specific heat capacity of object, volume of body, temperature of convection environment and equilibrium temperature. This type of analysis is called the lumped-heat-capacity method. Such systems are obviously idealized because a temperature gradient must exist in a material if heat is to be conducted into or out of the material. In general, the smaller the physical size of the body, the more realistic the assumption of a uniform temperature throughout; in the limit a differential volume could be employed as in the derivation of the general heat-conduction equation. Initial Temperature of Object is denoted by T₀ symbol.

How to calculate Initial Temperature of Body by Lumped Heat Capacity Method using this online calculator? To use this online calculator for Initial Temperature of Body by Lumped Heat Capacity Method, enter Temperature at Any Time T (T), Temperature of Bulk Fluid (T_∞), Heat Transfer Coefficient (h), Surface Area for Convection (A_c), Time Constant (𝜏), Density of Body (ρ_B), Specific Heat Capacity (c) & Volume of Object (V) and hit the calculate button. Here is how the Initial Temperature of Body by Lumped Heat Capacity Method calculation can be explained with given input values -> 979.9524 = (589-373)/(exp((-10*0.00785*1937)/(15*1.5*6.541)))+373.

FAQ

What is Initial Temperature of Body by Lumped Heat Capacity Method?

The Initial Temperature of Body by Lumped Heat Capacity Method formula is defined as the function of heat transfer coefficient, surface area of convection, density of object, specific heat capacity of object, volume of body, temperature of convection environment and equilibrium temperature. This type of analysis is called the lumped-heat-capacity method. Such systems are obviously idealized because a temperature gradient must exist in a material if heat is to be conducted into or out of the material. In general, the smaller the physical size of the body, the more realistic the assumption of a uniform temperature throughout; in the limit a differential volume could be employed as in the derivation of the general heat-conduction equation and is represented as T₀ = (T-T_∞)/(exp((-h*A_c*𝜏)/(ρ_B*c*V)))+T_∞ or Initial Temperature of Object = (Temperature at Any Time T-Temperature of Bulk Fluid)/(exp((-Heat Transfer Coefficient*Surface Area for Convection*Time Constant)/(Density of Body*Specific Heat Capacity*Volume of Object)))+Temperature of Bulk Fluid. Temperature at Any Time T is defined as the temperature of an object at any given time t measured using thermometer, Temperature of Bulk Fluid is defined as the temperature of bulk fluid or fluid at given instant measured using thermometer, The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place, Surface Area for Convection is defined as the surface area of object which is in the process of heat transfer, Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature, Density of Body is the physical quantity that expresses the relationship between its mass and its volume, Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount & Volume of Object is the amount of space that a substance or object occupies or that is enclosed within a container.

How to calculate Initial Temperature of Body by Lumped Heat Capacity Method?

The Initial Temperature of Body by Lumped Heat Capacity Method formula is defined as the function of heat transfer coefficient, surface area of convection, density of object, specific heat capacity of object, volume of body, temperature of convection environment and equilibrium temperature. This type of analysis is called the lumped-heat-capacity method. Such systems are obviously idealized because a temperature gradient must exist in a material if heat is to be conducted into or out of the material. In general, the smaller the physical size of the body, the more realistic the assumption of a uniform temperature throughout; in the limit a differential volume could be employed as in the derivation of the general heat-conduction equation is calculated using Initial Temperature of Object = (Temperature at Any Time T-Temperature of Bulk Fluid)/(exp((-Heat Transfer Coefficient*Surface Area for Convection*Time Constant)/(Density of Body*Specific Heat Capacity*Volume of Object)))+Temperature of Bulk Fluid. To calculate Initial Temperature of Body by Lumped Heat Capacity Method, you need Temperature at Any Time T (T), Temperature of Bulk Fluid (T_∞), Heat Transfer Coefficient (h), Surface Area for Convection (A_c), Time Constant (𝜏), Density of Body (ρ_B), Specific Heat Capacity (c) & Volume of Object (V). With our tool, you need to enter the respective value for Temperature at Any Time T, Temperature of Bulk Fluid, Heat Transfer Coefficient, Surface Area for Convection, Time Constant, Density of Body, Specific Heat Capacity & Volume of Object and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search