Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes Calculator

✖The Reactant Concentration refers to the amount of reactant present in the solvent at any given point of time during the process.ⓘ Reactant Concentration [C_A]			+10% -10%
✖Space Time for Plug Flow Reactor is the time taken by the amount of fluid to either completely enter or completely exit the plug flow reactor.ⓘ Space Time for Plug Flow Reactor [𝛕_p]			+10% -10%
✖Rate Constant for Plug Flow Reactor is the proportional constant of the particular reaction in the reactor.ⓘ Rate Constant for Plug Flow Reactor [k_{plug flow}]			+10% -10%

✖Initial Reactant Conc. refers to the amount of reactant present in the solvent before the considered process.ⓘ Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes [C_Ao]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Basics of Non Ideal Flow Formulas PDF PDF Image

Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Reactant Conc. = Reactant Concentration*exp(Space Time for Plug Flow Reactor*Rate Constant for Plug Flow Reactor)
C_Ao = C_A*exp(𝛕_p*k_{plug flow})
This formula uses 1 Functions, 4 Variables

Functions Used

exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)

Variables Used

Initial Reactant Conc. - (Measured in Mole per Cubic Meter) - Initial Reactant Conc. refers to the amount of reactant present in the solvent before the considered process.
Reactant Concentration - (Measured in Mole per Cubic Meter) - The Reactant Concentration refers to the amount of reactant present in the solvent at any given point of time during the process.
Space Time for Plug Flow Reactor - (Measured in Second) - Space Time for Plug Flow Reactor is the time taken by the amount of fluid to either completely enter or completely exit the plug flow reactor.
Rate Constant for Plug Flow Reactor - (Measured in Mole per Cubic Meter Second) - Rate Constant for Plug Flow Reactor is the proportional constant of the particular reaction in the reactor.

STEP 1: Convert Input(s) to Base Unit

Reactant Concentration: 24 Mole per Cubic Meter --> 24 Mole per Cubic Meter No Conversion Required
Space Time for Plug Flow Reactor: 0.069 Second --> 0.069 Second No Conversion Required
Rate Constant for Plug Flow Reactor: 20.05 Mole per Cubic Meter Second --> 20.05 Mole per Cubic Meter Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_Ao = C_A*exp(𝛕_p*k_{plug flow}) --> 24*exp(0.069*20.05)

Evaluating ... ...

C_Ao = 95.727329303289

STEP 3: Convert Result to Output's Unit

95.727329303289 Mole per Cubic Meter --> No Conversion Required

FINAL ANSWER

95.727329303289 ≈ 95.72733 Mole per Cubic Meter <-- Initial Reactant Conc.

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Chemical Engineering » Chemical Reaction Engineering » Flow Pattern, Contacting and Non Ideal Flow » Basics of Non Ideal Flow » Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes

Credits

Created by Pavan Kumar

Anurag Group of Institutions (AGI), Hyderabad

Pavan Kumar has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Basics of Non Ideal Flow Calculators

Exit Age Distribution Curve from C Pulse Curve

LaTeX Go Exit Age Distribution = C Pulse/(Units of Tracer/Volumetric Flow Rate of Feed to Reactor)

Mean of C Pulse Curve

LaTeX Go Mean Pulse Curve = Volume of Reactor/Volumetric Flow Rate of Feed to Reactor

Area under C-Pulse Curve

LaTeX Go Area under Curve = Units of Tracer/Volumetric Flow Rate of Feed to Reactor

F Curve

LaTeX Go F Curve = C Step/Initial Concentration of Reactant

Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes Formula

LaTeX Go

Initial Reactant Conc. = Reactant Concentration*exp(Space Time for Plug Flow Reactor*Rate Constant for Plug Flow Reactor)
C_Ao = C_A*exp(𝛕_p*k_{plug flow})

What is space time ?

It is the time required to to treat one reactor volume of feed, where it is defined as ratio between total volume of reactor and volumetric flow rate.

What is Plug Flow reactor ?

In a plug flow reactor the composition of the fluid varies from point to point along a flow path; consequently, the material balance for a reaction component must be made for a differential element of volume.

How to Calculate Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes?

Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes calculator uses Initial Reactant Conc. = Reactant Concentration*exp(Space Time for Plug Flow Reactor*Rate Constant for Plug Flow Reactor) to calculate the Initial Reactant Conc., The Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes formula is defined as the exponential relation between space, time and concentration. Initial Reactant Conc. is denoted by C_Ao symbol.

How to calculate Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes using this online calculator? To use this online calculator for Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes, enter Reactant Concentration (C_A), Space Time for Plug Flow Reactor (𝛕_p) & Rate Constant for Plug Flow Reactor (k_{plug flow}) and hit the calculate button. Here is how the Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes calculation can be explained with given input values -> 95.72733 = 24*exp(0.069*20.05).

FAQ

What is Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes?

The Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes formula is defined as the exponential relation between space, time and concentration and is represented as C_Ao = C_A*exp(𝛕_p*k_{plug flow}) or Initial Reactant Conc. = Reactant Concentration*exp(Space Time for Plug Flow Reactor*Rate Constant for Plug Flow Reactor). The Reactant Concentration refers to the amount of reactant present in the solvent at any given point of time during the process, Space Time for Plug Flow Reactor is the time taken by the amount of fluid to either completely enter or completely exit the plug flow reactor & Rate Constant for Plug Flow Reactor is the proportional constant of the particular reaction in the reactor.

How to calculate Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes?

The Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes formula is defined as the exponential relation between space, time and concentration is calculated using Initial Reactant Conc. = Reactant Concentration*exp(Space Time for Plug Flow Reactor*Rate Constant for Plug Flow Reactor). To calculate Initial Concentration of Reactant in Plug Flow Reactant with Negligible Density Changes, you need Reactant Concentration (C_A), Space Time for Plug Flow Reactor (𝛕_p) & Rate Constant for Plug Flow Reactor (k_{plug flow}). With our tool, you need to enter the respective value for Reactant Concentration, Space Time for Plug Flow Reactor & Rate Constant for Plug Flow Reactor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search