Inflow to Wedge given respective Salinities Calculator

✖Net Outflow through the Cross Section is the volume flowing through that cross section.ⓘ Net Outflow through the Cross Section [Q₁]			+10% -10%
✖Salinity at the Location 1, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.ⓘ Salinity at the Location 1 [S]			+10% -10%
✖Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.ⓘ Salinity at the Location 2 [S₂]			+10% -10%

✖Inflow in the Wedge influencing the net outflow through the cross section.ⓘ Inflow to Wedge given respective Salinities [Q_W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Coastal and Ocean Engineering Formula PDF PDF Image

Inflow to Wedge given respective Salinities Solution

STEP 0: Pre-Calculation Summary

Formula Used

Inflow in the Wedge = (Net Outflow through the Cross Section*Salinity at the Location 1)/Salinity at the Location 2
Q_W = (Q₁*S)/S₂
This formula uses 4 Variables

Variables Used

Inflow in the Wedge - (Measured in Cubic Meter per Second) - Inflow in the Wedge influencing the net outflow through the cross section.
Net Outflow through the Cross Section - (Measured in Cubic Meter per Second) - Net Outflow through the Cross Section is the volume flowing through that cross section.
Salinity at the Location 1 - Salinity at the Location 1, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.
Salinity at the Location 2 - Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.

STEP 1: Convert Input(s) to Base Unit

Net Outflow through the Cross Section: 50 Cubic Meter per Second --> 50 Cubic Meter per Second No Conversion Required
Salinity at the Location 1: 9 --> No Conversion Required
Salinity at the Location 2: 11 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_W = (Q₁*S)/S₂ --> (50*9)/11

Evaluating ... ...

Q_W = 40.9090909090909

STEP 3: Convert Result to Output's Unit

40.9090909090909 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

40.9090909090909 ≈ 40.90909 Cubic Meter per Second <-- Inflow in the Wedge

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Density Currents in Rivers » Static Salt Wedge » Inflow to Wedge given respective Salinities

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Static Salt Wedge Calculators

Non-dimensional Intrusion or Salt Wedge Length

LaTeX Go Non-dimensional Intrusion or Salt Wedge Length = (Quadratic Drag Coefficient*Intrusion Length)/Shoreline Depth

Fresh Water River Flow given Net Outflow through Cross-section

LaTeX Go Fresh Water River Flow = Net Outflow through the Cross Section-Inflow in the Wedge

Inflow to Wedge given Net Outflow through Cross-section

LaTeX Go Inflow in the Wedge = Net Outflow through the Cross Section-Fresh Water River Flow

Net Outflow through Cross-section

LaTeX Go Net Outflow through the Cross Section = Fresh Water River Flow+Inflow in the Wedge

Inflow to Wedge given respective Salinities Formula

LaTeX Go

Inflow in the Wedge = (Net Outflow through the Cross Section*Salinity at the Location 1)/Salinity at the Location 2
Q_W = (Q₁*S)/S₂

What is Inflow and Outflow of Water?

Inflow is adding water to the different aspects of the hydrologic system. Consequently, outflow is the removal of water from the hydrological cycle. Inflow adds water to different aspects of the hydrologic cycle, returning water storage to an even level.

What is the definition of Salt Wedging?

Salt wedging in an estuary is the process by which a distinct layer of saltwater forms below a layer of freshwater due to differences in density. Salt wedging is the result of weak tidal currents that cannot mix the saltwater with the freshwater, thus creating a halocline.

How to Calculate Inflow to Wedge given respective Salinities?

Inflow to Wedge given respective Salinities calculator uses Inflow in the Wedge = (Net Outflow through the Cross Section*Salinity at the Location 1)/Salinity at the Location 2 to calculate the Inflow in the Wedge, The Inflow to Wedge given respective Salinities formula is defined as adding water to the different aspects of the hydrologic system. Inflow in the Wedge is denoted by Q_W symbol.

How to calculate Inflow to Wedge given respective Salinities using this online calculator? To use this online calculator for Inflow to Wedge given respective Salinities, enter Net Outflow through the Cross Section (Q₁), Salinity at the Location 1 (S) & Salinity at the Location 2 (S₂) and hit the calculate button. Here is how the Inflow to Wedge given respective Salinities calculation can be explained with given input values -> 40.90909 = (50*9)/11.

FAQ

What is Inflow to Wedge given respective Salinities?

The Inflow to Wedge given respective Salinities formula is defined as adding water to the different aspects of the hydrologic system and is represented as Q_W = (Q₁*S)/S₂ or Inflow in the Wedge = (Net Outflow through the Cross Section*Salinity at the Location 1)/Salinity at the Location 2. Net Outflow through the Cross Section is the volume flowing through that cross section, Salinity at the Location 1, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water & Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.

How to calculate Inflow to Wedge given respective Salinities?

The Inflow to Wedge given respective Salinities formula is defined as adding water to the different aspects of the hydrologic system is calculated using Inflow in the Wedge = (Net Outflow through the Cross Section*Salinity at the Location 1)/Salinity at the Location 2. To calculate Inflow to Wedge given respective Salinities, you need Net Outflow through the Cross Section (Q₁), Salinity at the Location 1 (S) & Salinity at the Location 2 (S₂). With our tool, you need to enter the respective value for Net Outflow through the Cross Section, Salinity at the Location 1 & Salinity at the Location 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Inflow in the Wedge?

In this formula, Inflow in the Wedge uses Net Outflow through the Cross Section, Salinity at the Location 1 & Salinity at the Location 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Inflow in the Wedge = Net Outflow through the Cross Section-Fresh Water River Flow

Home

FREE PDFs

🔍 Search