Infeed given Metal Removal Rate during Grinding Calculator

✖Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding.ⓘ Metal Removal Rate [Z_w]			+10% -10%
✖Width of Cut is defined as the width of cut in the axial direction of grinding wheel, it is also known as back engagement.ⓘ Width of Cut [A_p]			+10% -10%
✖Surface Speed of Workpiece refers to the linear velocity of a point on the workpiece's circumference relative to the grinding wheel.ⓘ Surface Speed of Workpiece [V_w]			+10% -10%

✖Infeed Given on Workpiece refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material.ⓘ Infeed given Metal Removal Rate during Grinding [F_in]

⎘ Copy

👎

Formula

✖

Infeed given Metal Removal Rate during Grinding

Formula

F in = \frac{Z w}{A p \cdot V w}

Example

1.329693 mm = \frac{0.00375 m³/s}{478 mm \cdot 5.9 m/s}

Calculator

LaTeX

Reset

👍

Download Grain Formulas PDF PDF Image

Infeed given Metal Removal Rate during Grinding Solution

STEP 0: Pre-Calculation Summary

Formula Used

Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece)
F_in = Z_w/(A_p*V_w)
This formula uses 4 Variables

Variables Used

Infeed Given on Workpiece - (Measured in Meter) - Infeed Given on Workpiece refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material.
Metal Removal Rate - (Measured in Cubic Meter per Second) - Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding.
Width of Cut - (Measured in Meter) - Width of Cut is defined as the width of cut in the axial direction of grinding wheel, it is also known as back engagement.
Surface Speed of Workpiece - (Measured in Meter per Second) - Surface Speed of Workpiece refers to the linear velocity of a point on the workpiece's circumference relative to the grinding wheel.

STEP 1: Convert Input(s) to Base Unit

Metal Removal Rate: 0.00375 Cubic Meter per Second --> 0.00375 Cubic Meter per Second No Conversion Required
Width of Cut: 478 Millimeter --> 0.478 Meter (Check conversion here)
Surface Speed of Workpiece: 5.9 Meter per Second --> 5.9 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_in = Z_w/(A_p*V_w) --> 0.00375/(0.478*5.9)

Evaluating ... ...

F_in = 0.00132969292957946

STEP 3: Convert Result to Output's Unit

0.00132969292957946 Meter -->1.32969292957946 Millimeter (Check conversion here)

FINAL ANSWER

1.32969292957946 ≈ 1.329693 Millimeter <-- Infeed Given on Workpiece

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Material Removed » Grain » Infeed given Metal Removal Rate during Grinding

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Grain Calculators

Width of Grinding Path given Metal Removal Rate

Go Back Engagement = Metal Removal Rate/(Infeed in Grinding Operation*Surface Speed of Workpiece)

Metal removal rate during Grinding

Go Metal Removal Rate = Infeed in Grinding Operation*Back Engagement*Surface Speed of Workpiece

Infeed given Metal Removal Rate during Grinding

Go Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece)

Grain-aspect Ratio

Go Grain Aspect Ratio = Maximum Width of Chip/Maximum Undeformed Chip Thickness

Infeed given Metal Removal Rate during Grinding Formula

Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece)
F_in = Z_w/(A_p*V_w)

Why is Grinding used for?

Grinding is a machining process that's used to remove material from a workpiece via a grinding wheel. As the grinding wheel turns, it cuts material off the workpiece while creating a smooth surface texture in the process.

How to Calculate Infeed given Metal Removal Rate during Grinding?

Infeed given Metal Removal Rate during Grinding calculator uses Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece) to calculate the Infeed Given on Workpiece, The Infeed given Metal Removal Rate during Grinding refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material. It is a crucial parameter for determining grinding time, that affects overall efficiency of performing grinding operation. Infeed Given on Workpiece is denoted by F_in symbol.

How to calculate Infeed given Metal Removal Rate during Grinding using this online calculator? To use this online calculator for Infeed given Metal Removal Rate during Grinding, enter Metal Removal Rate (Z_w), Width of Cut (A_p) & Surface Speed of Workpiece (V_w) and hit the calculate button. Here is how the Infeed given Metal Removal Rate during Grinding calculation can be explained with given input values -> 1329.693 = 0.00375/(0.478*5.9).

FAQ

What is Infeed given Metal Removal Rate during Grinding?

The Infeed given Metal Removal Rate during Grinding refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material. It is a crucial parameter for determining grinding time, that affects overall efficiency of performing grinding operation and is represented as F_in = Z_w/(A_p*V_w) or Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece). Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding, Width of Cut is defined as the width of cut in the axial direction of grinding wheel, it is also known as back engagement & Surface Speed of Workpiece refers to the linear velocity of a point on the workpiece's circumference relative to the grinding wheel.

How to calculate Infeed given Metal Removal Rate during Grinding?

The Infeed given Metal Removal Rate during Grinding refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material. It is a crucial parameter for determining grinding time, that affects overall efficiency of performing grinding operation is calculated using Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece). To calculate Infeed given Metal Removal Rate during Grinding, you need Metal Removal Rate (Z_w), Width of Cut (A_p) & Surface Speed of Workpiece (V_w). With our tool, you need to enter the respective value for Metal Removal Rate, Width of Cut & Surface Speed of Workpiece and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search