Inertial Forces using Newton's Friction Model Calculator

✖Viscous Force is force due to viscosity.ⓘ Viscous Force [F_v]			+10% -10%
✖Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.ⓘ Density of Fluid [ρ_fluid]			+10% -10%
✖Velocity of Fluid is the vector field that is used to describe fluid motion in a mathematical manner.ⓘ Velocity of Fluid [V_f]			+10% -10%
✖Characteristic length is the linear dimension expressed in physical model relationships between prototype and model.ⓘ Characteristic length [L]			+10% -10%
✖The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity [μ_viscosity]			+10% -10%

✖Inertia Forces are the forces that keep fluid moving against viscous [ viscosity] forces.ⓘ Inertial Forces using Newton's Friction Model [F_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Relation between Forces on the Prototype and Forces on the Model Formulas PDF PDF Image

Inertial Forces using Newton's Friction Model Solution

STEP 0: Pre-Calculation Summary

Formula Used

Inertia Forces = (Viscous Force*Density of Fluid*Velocity of Fluid*Characteristic length)/Dynamic Viscosity
F_i = (F_v*ρ_fluid*V_f*L)/μ_viscosity
This formula uses 6 Variables

Variables Used

Inertia Forces - (Measured in Newton) - Inertia Forces are the forces that keep fluid moving against viscous [ viscosity] forces.
Viscous Force - (Measured in Newton) - Viscous Force is force due to viscosity.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.
Velocity of Fluid - (Measured in Meter per Second) - Velocity of Fluid is the vector field that is used to describe fluid motion in a mathematical manner.
Characteristic length - (Measured in Meter) - Characteristic length is the linear dimension expressed in physical model relationships between prototype and model.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.

STEP 1: Convert Input(s) to Base Unit

Viscous Force: 0.0504 Kilonewton --> 50.4 Newton (Check conversion here)
Density of Fluid: 1.225 Kilogram per Cubic Meter --> 1.225 Kilogram per Cubic Meter No Conversion Required
Velocity of Fluid: 20 Meter per Second --> 20 Meter per Second No Conversion Required
Characteristic length: 3 Meter --> 3 Meter No Conversion Required
Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_i = (F_v*ρ_fluid*V_f*L)/μ_viscosity --> (50.4*1.225*20*3)/1.02

Evaluating ... ...

F_i = 3631.76470588235

STEP 3: Convert Result to Output's Unit

3631.76470588235 Newton -->3.63176470588235 Kilonewton (Check conversion here)

FINAL ANSWER

3.63176470588235 ≈ 3.631765 Kilonewton <-- Inertia Forces

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Offshore Hydromechanics » Dimensionless Ratios and Scaling Laws » Relation between Forces on the Prototype and Forces on the Model » Inertial Forces using Newton's Friction Model

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Relation between Forces on the Prototype and Forces on the Model Calculators

Relation between Forces on Prototype and Forces on Model

LaTeX Go Force on Prototype = Scale Factor for Density of Fluid*(Scale Factor for Velocity^2)*(Scale Factor for Length^2)*Force on Model

Scale Factor for Inertia Forces given Force on Prototype

LaTeX Go Scale Factor for Inertia Forces = Force on Prototype/Force on Model

Force on Model given Force on Prototype

LaTeX Go Force on Model = Force on Prototype/Scale Factor for Inertia Forces

Force on Prototype

LaTeX Go Force on Prototype = Scale Factor for Inertia Forces*Force on Model

Inertial Forces using Newton's Friction Model Formula

LaTeX Go

Inertia Forces = (Viscous Force*Density of Fluid*Velocity of Fluid*Characteristic length)/Dynamic Viscosity
F_i = (F_v*ρ_fluid*V_f*L)/μ_viscosity

What is Viscosity in fluid?

The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water. The viscous force is the force between a body and a fluid (liquid or gas) moving past it, in a direction so as to oppose the flow of the fluid past the object

How to Calculate Inertial Forces using Newton's Friction Model?

Inertial Forces using Newton's Friction Model calculator uses Inertia Forces = (Viscous Force*Density of Fluid*Velocity of Fluid*Characteristic length)/Dynamic Viscosity to calculate the Inertia Forces, The Inertial Forces using Newton's friction models is defined using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters. Inertia Forces is denoted by F_i symbol.

How to calculate Inertial Forces using Newton's Friction Model using this online calculator? To use this online calculator for Inertial Forces using Newton's Friction Model, enter Viscous Force (F_v), Density of Fluid (ρ_fluid), Velocity of Fluid (V_f), Characteristic length (L) & Dynamic Viscosity (μ_viscosity) and hit the calculate button. Here is how the Inertial Forces using Newton's Friction Model calculation can be explained with given input values -> 0.003632 = (50.4*1.225*20*3)/1.02.

FAQ

What is Inertial Forces using Newton's Friction Model?

The Inertial Forces using Newton's friction models is defined using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters and is represented as F_i = (F_v*ρ_fluid*V_f*L)/μ_viscosity or Inertia Forces = (Viscous Force*Density of Fluid*Velocity of Fluid*Characteristic length)/Dynamic Viscosity. Viscous Force is force due to viscosity, Density of Fluid is defined as the mass of fluid per unit volume of the said fluid, Velocity of Fluid is the vector field that is used to describe fluid motion in a mathematical manner, Characteristic length is the linear dimension expressed in physical model relationships between prototype and model & The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.

How to calculate Inertial Forces using Newton's Friction Model?

The Inertial Forces using Newton's friction models is defined using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters is calculated using Inertia Forces = (Viscous Force*Density of Fluid*Velocity of Fluid*Characteristic length)/Dynamic Viscosity. To calculate Inertial Forces using Newton's Friction Model, you need Viscous Force (F_v), Density of Fluid (ρ_fluid), Velocity of Fluid (V_f), Characteristic length (L) & Dynamic Viscosity (μ_viscosity). With our tool, you need to enter the respective value for Viscous Force, Density of Fluid, Velocity of Fluid, Characteristic length & Dynamic Viscosity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Inertia Forces?

In this formula, Inertia Forces uses Viscous Force, Density of Fluid, Velocity of Fluid, Characteristic length & Dynamic Viscosity. We can use 1 other way(s) to calculate the same, which is/are as follows -

Inertia Forces = (Viscous Force*Velocity of Fluid*Characteristic length)/Kinematic Viscosity for Model Analysis

Home

FREE PDFs

🔍 Search