Initial Temperature of Pipe Calculator

✖Final Temperature is change in temperature to your substance's original temperature to find its final heat.ⓘ Final Temperature [T_f]			+10% -10%
✖Thermal Stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered.ⓘ Thermal Stress [σ_t]			+10% -10%
✖Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa.ⓘ Modulus of Elasticity in Gpa [E_gpa]			+10% -10%
✖The Coefficient of Thermal Expansion is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Coefficient of Thermal Expansion [α]			+10% -10%

✖Initial Temperature is the measure of hotness or coldness of a system at its initial state.ⓘ Initial Temperature of Pipe [t_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Temperature Stresses Formulas PDF PDF Image

Initial Temperature of Pipe Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion))
t_i = T_f-(σ_t/(E_gpa*α))
This formula uses 5 Variables

Variables Used

Initial Temperature - (Measured in Kelvin) - Initial Temperature is the measure of hotness or coldness of a system at its initial state.
Final Temperature - (Measured in Kelvin) - Final Temperature is change in temperature to your substance's original temperature to find its final heat.
Thermal Stress - (Measured in Pascal) - Thermal Stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered.
Modulus of Elasticity in Gpa - (Measured in Pascal) - Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa.
Coefficient of Thermal Expansion - (Measured in Per Kelvin) - The Coefficient of Thermal Expansion is a material property that is indicative of the extent to which a material expands upon heating.

STEP 1: Convert Input(s) to Base Unit

Final Temperature: 22 Celsius --> 295.15 Kelvin (Check conversion here)
Thermal Stress: 1.4 Gigapascal --> 1400000000 Pascal (Check conversion here)
Modulus of Elasticity in Gpa: 200 Gigapascal --> 200000000000 Pascal (Check conversion here)
Coefficient of Thermal Expansion: 0.000434 Per Degree Celsius --> 0.000434 Per Kelvin (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_i = T_f-(σ_t/(E_gpa*α)) --> 295.15-(1400000000/(200000000000*0.000434))

Evaluating ... ...

t_i = 279.020967741935

STEP 3: Convert Result to Output's Unit

279.020967741935 Kelvin -->5.87096774193549 Celsius (Check conversion here)

FINAL ANSWER

5.87096774193549 ≈ 5.870968 Celsius <-- Initial Temperature

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Conveyance of Water » Stresses in Pipes » Temperature Stresses » Initial Temperature of Pipe

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Temperature Stresses Calculators

Temperature Stress using Initial and Final Temperature

LaTeX Go Thermal Stress = Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion*(Final Temperature-Initial Temperature)

Temperature Variation using Thermal Stress Developed in Pipes

LaTeX Go Change in Temperature = Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion)

Modulus of Elasticity of Pipe Material

LaTeX Go Modulus of Elasticity in Gpa = Thermal Stress/(Coefficient of Thermal Expansion*Change in Temperature)

Temperature Stress using Temperature Variation in Water Pipe

LaTeX Go Thermal Stress = Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion*Change in Temperature

Initial Temperature of Pipe Formula

LaTeX Go

Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion))
t_i = T_f-(σ_t/(E_gpa*α))

What is Thermal Stress?

In mechanics and thermodynamics, thermal stress is mechanical stress created by any change in temperature of a material. These stresses can lead to fracturing or plastic deformation depending on the other variables of heating, which include material types and constraints.

How to Calculate Initial Temperature of Pipe?

Initial Temperature of Pipe calculator uses Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion)) to calculate the Initial Temperature, The Initial Temperature of Pipe formula is defined as the value of starting temperature of a pipe before any external influences or operations affect it. This parameter is significant because it can impact various properties and behaviors of the pipe material and the fluid or gas flowing through it. Initial Temperature is denoted by t_i symbol.

How to calculate Initial Temperature of Pipe using this online calculator? To use this online calculator for Initial Temperature of Pipe, enter Final Temperature (T_f), Thermal Stress (σ_t), Modulus of Elasticity in Gpa (E_gpa) & Coefficient of Thermal Expansion (α) and hit the calculate button. Here is how the Initial Temperature of Pipe calculation can be explained with given input values -> -267.279032 = 295.15-(1400000000/(200000000000*0.000434)).

FAQ

What is Initial Temperature of Pipe?

The Initial Temperature of Pipe formula is defined as the value of starting temperature of a pipe before any external influences or operations affect it. This parameter is significant because it can impact various properties and behaviors of the pipe material and the fluid or gas flowing through it and is represented as t_i = T_f-(σ_t/(E_gpa*α)) or Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion)). Final Temperature is change in temperature to your substance's original temperature to find its final heat, Thermal Stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered, Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa & The Coefficient of Thermal Expansion is a material property that is indicative of the extent to which a material expands upon heating.

How to calculate Initial Temperature of Pipe?

The Initial Temperature of Pipe formula is defined as the value of starting temperature of a pipe before any external influences or operations affect it. This parameter is significant because it can impact various properties and behaviors of the pipe material and the fluid or gas flowing through it is calculated using Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion)). To calculate Initial Temperature of Pipe, you need Final Temperature (T_f), Thermal Stress (σ_t), Modulus of Elasticity in Gpa (E_gpa) & Coefficient of Thermal Expansion (α). With our tool, you need to enter the respective value for Final Temperature, Thermal Stress, Modulus of Elasticity in Gpa & Coefficient of Thermal Expansion and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search