LCM of two numbers

Initial Mass of Evaporant Required to be Carried for given Flight Time Calculator

Engineering Chemistry Financial Health More >>

↳

Mechanical Chemical Engineering Civil Electrical More >>

⤿

Refrigeration and Air Conditioning Cryogenic Systems Fluid Mechanics Industrial Engineering More >>

⤿

Air Refrigeration Systems Air Refrigeration Cycles

✖Rate of Heat Removal is the amount of heat transferred per unit time from the air refrigeration system to the surroundings.ⓘ Rate of Heat Removal [Q_r]			+10% -10%
✖Time in Minutes is the duration required for air refrigeration to cool a substance or object to a desired temperature.ⓘ Time in Minutes [t]			+10% -10%
✖Latent Heat of Vaporization is the amount of heat required to change the state of air refrigerant from liquid to vapor at a constant temperature.ⓘ Latent Heat of Vaporization [h_fg]			+10% -10%

✖Initial Mass is the quantity of matter in a system, typically measured in kilograms, used to calculate the energy required for air refrigeration.ⓘ Initial Mass of Evaporant Required to be Carried for given Flight Time [M_ini]

⎘ Copy

👎

Formula

✖

Initial Mass of Evaporant Required to be Carried for given Flight Time

Formula

M ini = \frac{Q r \cdot t}{h fg}

Example

53.53982 kg = \frac{550 kJ/min \cdot 220 min}{2260 kJ/kg}

Calculator

LaTeX

Reset

👍

Download Refrigeration and Air Conditioning Formulas PDF PDF Image

Initial Mass of Evaporant Required to be Carried for given Flight Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization
M_ini = (Q_r*t)/h_fg
This formula uses 4 Variables

Variables Used

Initial Mass - (Measured in Kilogram) - Initial Mass is the quantity of matter in a system, typically measured in kilograms, used to calculate the energy required for air refrigeration.
Rate of Heat Removal - (Measured in Joule per Second) - Rate of Heat Removal is the amount of heat transferred per unit time from the air refrigeration system to the surroundings.
Time in Minutes - (Measured in Second) - Time in Minutes is the duration required for air refrigeration to cool a substance or object to a desired temperature.
Latent Heat of Vaporization - (Measured in Joule per Kilogram) - Latent Heat of Vaporization is the amount of heat required to change the state of air refrigerant from liquid to vapor at a constant temperature.

STEP 1: Convert Input(s) to Base Unit

Rate of Heat Removal: 550 Kilojoule per Minute --> 9166.66666666668 Joule per Second (Check conversion here)
Time in Minutes: 220 Minute --> 13200 Second (Check conversion here)
Latent Heat of Vaporization: 2260 Kilojoule per Kilogram --> 2260000 Joule per Kilogram (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_ini = (Q_r*t)/h_fg --> (9166.66666666668*13200)/2260000

Evaluating ... ...

M_ini = 53.5398230088496

STEP 3: Convert Result to Output's Unit

53.5398230088496 Kilogram --> No Conversion Required

FINAL ANSWER

53.5398230088496 ≈ 53.53982 Kilogram <-- Initial Mass

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Refrigeration and Air Conditioning » Air Refrigeration Systems » Initial Mass of Evaporant Required to be Carried for given Flight Time

Credits

Created by Rushi Shah

K J Somaiya College of Engineering (K J Somaiya), Mumbai

Rushi Shah has created this Calculator and 25+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Air Refrigeration Systems Calculators

Temperature Ratio at Start and End of Ramming Process

Go Temperature Ratio = 1+(Velocity^2*(Heat Capacity Ratio-1))/(2*Heat Capacity Ratio*[R]*Initial Temperature)

Ram Efficiency

Go Ram Efficiency = (Stagnation Pressure of System-Initial Pressure of System)/(Final Pressure of System-Initial Pressure of System)

Local Sonic or Acoustic Velocity at Ambient Air Conditions

Go Sonic Velocity = (Heat Capacity Ratio*[R]*Initial Temperature/Molecular Weight)^0.5

Initial Mass of Evaporant Required to be Carried for given Flight Time

Go Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization

< Air Refrigeration Calculators

Compression or Expansion Ratio

Go Compression or Expansion Ratio = Pressure at End of Isentropic Compression/Pressure at Start of Isentropic Compression

Relative Coefficient of Performance

Go Relative Coefficient of Performance = Actual Coefficient of Performance/Theoretical Coefficient of Performance

Energy Performance Ratio of Heat Pump

Go Theoretical Coefficient of Performance = Heat Delivered to Hot Body/Work Done per min

Theoretical Coefficient of Performance of Refrigerator

Go Theoretical Coefficient of Performance = Heat Extracted from Refrigerator/Work Done

Initial Mass of Evaporant Required to be Carried for given Flight Time Formula

Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization
M_ini = (Q_r*t)/h_fg

Which Cooling System uses an Evaporant?

An evaporative cooling system uses an evaporant. In this system, water or another liquid is evaporated to absorb heat from the surrounding air, thereby cooling it. The process involves the evaporation of the liquid, which absorbs latent heat and results in a drop in air temperature. This type of cooling is commonly used in cooling towers, swamp coolers, and some air conditioning systems.

How to Calculate Initial Mass of Evaporant Required to be Carried for given Flight Time?

Initial Mass of Evaporant Required to be Carried for given Flight Time calculator uses Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization to calculate the Initial Mass, Initial Mass of Evaporant Required to be Carried for given Flight Time formula is defined as the amount of evaporant required to be carried by an aircraft for a specified flight duration, taking into account the rate of evaporation and the heat of vaporization of the evaporant. Initial Mass is denoted by M_ini symbol.

How to calculate Initial Mass of Evaporant Required to be Carried for given Flight Time using this online calculator? To use this online calculator for Initial Mass of Evaporant Required to be Carried for given Flight Time, enter Rate of Heat Removal (Q_r), Time in Minutes (t) & Latent Heat of Vaporization (h_fg) and hit the calculate button. Here is how the Initial Mass of Evaporant Required to be Carried for given Flight Time calculation can be explained with given input values -> 53.53982 = (9166.66666666668*13200)/2260000.

FAQ

What is Initial Mass of Evaporant Required to be Carried for given Flight Time?

Initial Mass of Evaporant Required to be Carried for given Flight Time formula is defined as the amount of evaporant required to be carried by an aircraft for a specified flight duration, taking into account the rate of evaporation and the heat of vaporization of the evaporant and is represented as M_ini = (Q_r*t)/h_fg or Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization. Rate of Heat Removal is the amount of heat transferred per unit time from the air refrigeration system to the surroundings, Time in Minutes is the duration required for air refrigeration to cool a substance or object to a desired temperature & Latent Heat of Vaporization is the amount of heat required to change the state of air refrigerant from liquid to vapor at a constant temperature.

How to calculate Initial Mass of Evaporant Required to be Carried for given Flight Time?

Initial Mass of Evaporant Required to be Carried for given Flight Time formula is defined as the amount of evaporant required to be carried by an aircraft for a specified flight duration, taking into account the rate of evaporation and the heat of vaporization of the evaporant is calculated using Initial Mass = (Rate of Heat Removal*Time in Minutes)/Latent Heat of Vaporization. To calculate Initial Mass of Evaporant Required to be Carried for given Flight Time, you need Rate of Heat Removal (Q_r), Time in Minutes (t) & Latent Heat of Vaporization (h_fg). With our tool, you need to enter the respective value for Rate of Heat Removal, Time in Minutes & Latent Heat of Vaporization and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search