Initial circumference given circumferential strain for rotating thin disc Calculator

✖Final circumference refers to the circumference of an object (typically a circle or a disc) after some process or change has occurred.ⓘ Final Circumference [C₂]			+10% -10%
✖Circumferential strain refers to the deformation or change in the dimensions of an object in the circumferential direction (around the circumference) when it is subjected to stress or force.ⓘ Circumferential Strain [e₁]			+10% -10%

✖Initial circumference refers to the starting or original measurement of the circumference of a circle or object.ⓘ Initial circumference given circumferential strain for rotating thin disc [C_initial]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Initial circumference given circumferential strain for rotating thin disc Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Circumference = Final Circumference/(Circumferential Strain+1)
C_initial = C₂/(e₁+1)
This formula uses 3 Variables

Variables Used

Initial Circumference - (Measured in Meter) - Initial circumference refers to the starting or original measurement of the circumference of a circle or object.
Final Circumference - (Measured in Meter) - Final circumference refers to the circumference of an object (typically a circle or a disc) after some process or change has occurred.
Circumferential Strain - Circumferential strain refers to the deformation or change in the dimensions of an object in the circumferential direction (around the circumference) when it is subjected to stress or force.

STEP 1: Convert Input(s) to Base Unit

Final Circumference: 6.4 Millimeter --> 0.0064 Meter (Check conversion here)
Circumferential Strain: 2.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_initial = C₂/(e₁+1) --> 0.0064/(2.5+1)

Evaluating ... ...

C_initial = 0.00182857142857143

STEP 3: Convert Result to Output's Unit

0.00182857142857143 Meter -->1.82857142857143 Millimeter (Check conversion here)

FINAL ANSWER

1.82857142857143 ≈ 1.828571 Millimeter <-- Initial Circumference

(Calculation completed in 00.011 seconds)

You are here -

Home » Physics » Strength of Materials » Rotating Disc And Cylinder » Expression for Stresses in Rotating Thin Disc » Mechanical » Relation of Parameters » Initial circumference given circumferential strain for rotating thin disc

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Relation of Parameters Calculators

Angular speed of rotation for thin cylinder given hoop stress in thin cylinder

LaTeX Go Angular Velocity = Hoop Stress in Disc/(Density of Disc*Radius of Disc)

Density of cylinder material given hoop stress (for thin cylinder)

LaTeX Go Density of Disc = Hoop Stress in Disc/(Angular Velocity*Radius of Disc)

Mean radius of cylinder given hoop stress in thin cylinder

LaTeX Go Radius of Disc = Hoop Stress in Disc/(Density of Disc*Angular Velocity)

Hoop stress in thin cylinder

LaTeX Go Hoop Stress in Disc = Density of Disc*Angular Velocity*Radius of Disc

Initial circumference given circumferential strain for rotating thin disc Formula

LaTeX Go

Initial Circumference = Final Circumference/(Circumferential Strain+1)
C_initial = C₂/(e₁+1)

What is the Allowable Stress?

Allowable stress, also known as allowable strength, is the maximum stress that a material or structure can safely withstand without experiencing failure or permanent deformation. Allowable stress is the stress at which a member is not expected to fail under the given loading conditions.

What is Compression Stress Force?

Compression stress force is the stress that squeezes something. It is the stress component perpendicular to a given surface, such as a fault plane, that results from forces applied perpendicular to the surface or from remote forces transmitted through the surrounding rock.

How to Calculate Initial circumference given circumferential strain for rotating thin disc?

Initial circumference given circumferential strain for rotating thin disc calculator uses Initial Circumference = Final Circumference/(Circumferential Strain+1) to calculate the Initial Circumference, Initial circumference given circumferential strain for rotating thin disc formula is defined as a relationship that determines the original circumference of a rotating disc based on the observed circumferential strain, aiding in the analysis of material strength under rotational forces. Initial Circumference is denoted by C_initial symbol.

How to calculate Initial circumference given circumferential strain for rotating thin disc using this online calculator? To use this online calculator for Initial circumference given circumferential strain for rotating thin disc, enter Final Circumference (C₂) & Circumferential Strain (e₁) and hit the calculate button. Here is how the Initial circumference given circumferential strain for rotating thin disc calculation can be explained with given input values -> 1828.571 = 0.0064/(2.5+1).

FAQ

What is Initial circumference given circumferential strain for rotating thin disc?

Initial circumference given circumferential strain for rotating thin disc formula is defined as a relationship that determines the original circumference of a rotating disc based on the observed circumferential strain, aiding in the analysis of material strength under rotational forces and is represented as C_initial = C₂/(e₁+1) or Initial Circumference = Final Circumference/(Circumferential Strain+1). Final circumference refers to the circumference of an object (typically a circle or a disc) after some process or change has occurred & Circumferential strain refers to the deformation or change in the dimensions of an object in the circumferential direction (around the circumference) when it is subjected to stress or force.

How to calculate Initial circumference given circumferential strain for rotating thin disc?

Initial circumference given circumferential strain for rotating thin disc formula is defined as a relationship that determines the original circumference of a rotating disc based on the observed circumferential strain, aiding in the analysis of material strength under rotational forces is calculated using Initial Circumference = Final Circumference/(Circumferential Strain+1). To calculate Initial circumference given circumferential strain for rotating thin disc, you need Final Circumference (C₂) & Circumferential Strain (e₁). With our tool, you need to enter the respective value for Final Circumference & Circumferential Strain and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search