Increase in initial radial width of disc given stresses Calculator

✖Radial Stress induced by a bending moment in a member of constant cross section.ⓘ Radial Stress [σ_r]			+10% -10%
✖Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.ⓘ Poisson's Ratio [𝛎]			+10% -10%
✖Circumferential Stress is the force over area exerted circumferentially perpendicular to the axis and the radius.ⓘ Circumferential Stress [σ_c]			+10% -10%
✖Modulus Of Elasticity Of Disc is a quantity that measures disc's resistance to being deformed elastically when a stress is applied to it.ⓘ Modulus Of Elasticity Of Disc [E]			+10% -10%
✖Initial Radial Width is the radial width without any strain.ⓘ Initial Radial Width [dr]			+10% -10%

✖Increase in Radial Width is the increase in radial width due to strain.ⓘ Increase in initial radial width of disc given stresses [du]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Increase in initial radial width of disc given stresses Solution

STEP 0: Pre-Calculation Summary

Formula Used

Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width
du = ((σ_r-(𝛎*σ_c))/E)*dr
This formula uses 6 Variables

Variables Used

Increase in Radial Width - (Measured in Meter) - Increase in Radial Width is the increase in radial width due to strain.
Radial Stress - (Measured in Pascal) - Radial Stress induced by a bending moment in a member of constant cross section.
Poisson's Ratio - Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.
Circumferential Stress - (Measured in Pascal) - Circumferential Stress is the force over area exerted circumferentially perpendicular to the axis and the radius.
Modulus Of Elasticity Of Disc - (Measured in Pascal) - Modulus Of Elasticity Of Disc is a quantity that measures disc's resistance to being deformed elastically when a stress is applied to it.
Initial Radial Width - (Measured in Meter) - Initial Radial Width is the radial width without any strain.

STEP 1: Convert Input(s) to Base Unit

Radial Stress: 100 Newton per Square Meter --> 100 Pascal (Check conversion here)
Poisson's Ratio: 0.3 --> No Conversion Required
Circumferential Stress: 80 Newton per Square Meter --> 80 Pascal (Check conversion here)
Modulus Of Elasticity Of Disc: 8 Newton per Square Meter --> 8 Pascal (Check conversion here)
Initial Radial Width: 3 Millimeter --> 0.003 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

du = ((σ_r-(𝛎*σ_c))/E)*dr --> ((100-(0.3*80))/8)*0.003

Evaluating ... ...

du = 0.0285

STEP 3: Convert Result to Output's Unit

0.0285 Meter -->28.5 Millimeter (Check conversion here)

FINAL ANSWER

28.5 Millimeter <-- Increase in Radial Width

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Rotating Disc And Cylinder » Expression for Stresses in Rotating Thin Disc » Mechanical » Radial Width » Increase in initial radial width of disc given stresses

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Radial Width Calculators

Increase in initial radial width of disc given stresses

LaTeX Go Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width

Increase in radial width given radial strain for rotating thin disc

LaTeX Go Increase in Radial Width = Radial strain*Initial Radial Width

Disc initial radial width given radial strain for rotating thin disc

LaTeX Go Initial Radial Width = Final Radial Width/(Radial strain+1)

Final radial width given radial strain for rotating thin disc

LaTeX Go Final Radial Width = (Radial strain+1)*Initial Radial Width

Increase in initial radial width of disc given stresses Formula

LaTeX Go

Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width
du = ((σ_r-(𝛎*σ_c))/E)*dr

What is compression stress force?

Compression stress force is the stress that squeezes something. It is the stress component perpendicular to a given surface, such as a fault plane, that results from forces applied perpendicular to the surface or from remote forces transmitted through the surrounding rock.

How to Calculate Increase in initial radial width of disc given stresses?

Increase in initial radial width of disc given stresses calculator uses Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width to calculate the Increase in Radial Width, The Increase in initial radial width of disc given stresses formula is defined as increase in length value of half of the difference between the outer and inner diameter of the main body part. Increase in Radial Width is denoted by du symbol.

How to calculate Increase in initial radial width of disc given stresses using this online calculator? To use this online calculator for Increase in initial radial width of disc given stresses, enter Radial Stress (σ_r), Poisson's Ratio (𝛎), Circumferential Stress (σ_c), Modulus Of Elasticity Of Disc (E) & Initial Radial Width (dr) and hit the calculate button. Here is how the Increase in initial radial width of disc given stresses calculation can be explained with given input values -> 28500 = ((100-(0.3*80))/8)*0.003.

FAQ

What is Increase in initial radial width of disc given stresses?

The Increase in initial radial width of disc given stresses formula is defined as increase in length value of half of the difference between the outer and inner diameter of the main body part and is represented as du = ((σ_r-(𝛎*σ_c))/E)*dr or Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width. Radial Stress induced by a bending moment in a member of constant cross section, Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5, Circumferential Stress is the force over area exerted circumferentially perpendicular to the axis and the radius, Modulus Of Elasticity Of Disc is a quantity that measures disc's resistance to being deformed elastically when a stress is applied to it & Initial Radial Width is the radial width without any strain.

How to calculate Increase in initial radial width of disc given stresses?

The Increase in initial radial width of disc given stresses formula is defined as increase in length value of half of the difference between the outer and inner diameter of the main body part is calculated using Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus Of Elasticity Of Disc)*Initial Radial Width. To calculate Increase in initial radial width of disc given stresses, you need Radial Stress (σ_r), Poisson's Ratio (𝛎), Circumferential Stress (σ_c), Modulus Of Elasticity Of Disc (E) & Initial Radial Width (dr). With our tool, you need to enter the respective value for Radial Stress, Poisson's Ratio, Circumferential Stress, Modulus Of Elasticity Of Disc & Initial Radial Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Increase in Radial Width?

In this formula, Increase in Radial Width uses Radial Stress, Poisson's Ratio, Circumferential Stress, Modulus Of Elasticity Of Disc & Initial Radial Width. We can use 1 other way(s) to calculate the same, which is/are as follows -

Increase in Radial Width = Radial strain*Initial Radial Width

Home

FREE PDFs

🔍 Search