Incident Voltage of Incident Wave Calculator

✖Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.ⓘ Incident Current [I_i]			+10% -10%
✖The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.ⓘ Characteristic Impedance [Z₀]			+10% -10%

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage of Incident Wave [V_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Incident Voltage of Incident Wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Incident Voltage = Incident Current*Characteristic Impedance
V_i = I_i*Z₀
This formula uses 3 Variables

Variables Used

Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Incident Current - (Measured in Ampere) - Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Incident Current: 12 Ampere --> 12 Ampere No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_i = I_i*Z₀ --> 12*55.5

Evaluating ... ...

V_i = 666

STEP 3: Convert Result to Output's Unit

666 Volt --> No Conversion Required

FINAL ANSWER

666 Volt <-- Incident Voltage

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Incident Voltage of Incident Wave

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Incident Voltage of Incident Wave Formula

LaTeX Go

Incident Voltage = Incident Current*Characteristic Impedance
V_i = I_i*Z₀

Define characteristic impedance.

The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line.

How to Calculate Incident Voltage of Incident Wave?

Incident Voltage of Incident Wave calculator uses Incident Voltage = Incident Current*Characteristic Impedance to calculate the Incident Voltage, The Incident Voltage of Incident Wave formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Voltage is denoted by V_i symbol.

How to calculate Incident Voltage of Incident Wave using this online calculator? To use this online calculator for Incident Voltage of Incident Wave, enter Incident Current (I_i) & Characteristic Impedance (Z₀) and hit the calculate button. Here is how the Incident Voltage of Incident Wave calculation can be explained with given input values -> 666 = 12*55.5.

FAQ

What is Incident Voltage of Incident Wave?

The Incident Voltage of Incident Wave formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as V_i = I_i*Z₀ or Incident Voltage = Incident Current*Characteristic Impedance. Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

How to calculate Incident Voltage of Incident Wave?

The Incident Voltage of Incident Wave formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Voltage = Incident Current*Characteristic Impedance. To calculate Incident Voltage of Incident Wave, you need Incident Current (I_i) & Characteristic Impedance (Z₀). With our tool, you need to enter the respective value for Incident Current & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Incident Voltage?

In this formula, Incident Voltage uses Incident Current & Characteristic Impedance. We can use 3 other way(s) to calculate the same, which is/are as follows -

Incident Voltage = Transmitted Voltage/2
Incident Voltage = Reflected Voltage*(Load Impedance+Characteristic Impedance)/(Load Impedance-Characteristic Impedance)
Incident Voltage = Transmitted Voltage-Reflected Voltage

Home

FREE PDFs

🔍 Search