Incident Current for Incident Wave Calculator

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage [V_i]			+10% -10%
✖The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.ⓘ Characteristic Impedance [Z₀]			+10% -10%

✖Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.ⓘ Incident Current for Incident Wave [I_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Incident Current for Incident Wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Incident Current = Incident Voltage/Characteristic Impedance
I_i = V_i/Z₀
This formula uses 3 Variables

Variables Used

Incident Current - (Measured in Ampere) - Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.
Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Incident Voltage: 6 Volt --> 6 Volt No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_i = V_i/Z₀ --> 6/55.5

Evaluating ... ...

I_i = 0.108108108108108

STEP 3: Convert Result to Output's Unit

0.108108108108108 Ampere --> No Conversion Required

FINAL ANSWER

0.108108108108108 ≈ 0.108108 Ampere <-- Incident Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Incident Current for Incident Wave

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Incident Current for Incident Wave Formula

LaTeX Go

Incident Current = Incident Voltage/Characteristic Impedance
I_i = V_i/Z₀

Define characteristic impedance.

The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line.

How to Calculate Incident Current for Incident Wave?

Incident Current for Incident Wave calculator uses Incident Current = Incident Voltage/Characteristic Impedance to calculate the Incident Current, The Incident Current for Incident Wave formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Current is denoted by I_i symbol.

How to calculate Incident Current for Incident Wave using this online calculator? To use this online calculator for Incident Current for Incident Wave, enter Incident Voltage (V_i) & Characteristic Impedance (Z₀) and hit the calculate button. Here is how the Incident Current for Incident Wave calculation can be explained with given input values -> 0.108108 = 6/55.5.

FAQ

What is Incident Current for Incident Wave?

The Incident Current for Incident Wave formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as I_i = V_i/Z₀ or Incident Current = Incident Voltage/Characteristic Impedance. The Incident Voltage on the transmission line is equal to half the generator voltage & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

How to calculate Incident Current for Incident Wave?

The Incident Current for Incident Wave formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Current = Incident Voltage/Characteristic Impedance. To calculate Incident Current for Incident Wave, you need Incident Voltage (V_i) & Characteristic Impedance (Z₀). With our tool, you need to enter the respective value for Incident Voltage & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Incident Current?

In this formula, Incident Current uses Incident Voltage & Characteristic Impedance. We can use 1 other way(s) to calculate the same, which is/are as follows -

Incident Current = Transmitted Current-Reflected Current

Home

FREE PDFs

🔍 Search